提交 ee3cb629 编写于 作者: A Ajit Khaparde 提交者: David S. Miller

be2net: changes to properly provide phy details

be2net driver is currently not showing correct phy details in certain cases.
This patch fixes it.
Signed-off-by: NAjit Khaparde <ajitk@serverengines.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 3d8009c7
......@@ -282,6 +282,7 @@ struct be_adapter {
int link_speed;
u8 port_type;
u8 transceiver;
u8 autoneg;
u8 generation; /* BladeEngine ASIC generation */
u32 flash_status;
struct completion flash_compl;
......
......@@ -1695,3 +1695,38 @@ int be_cmd_get_seeprom_data(struct be_adapter *adapter,
spin_unlock_bh(&adapter->mcc_lock);
return status;
}
int be_cmd_get_phy_info(struct be_adapter *adapter, struct be_dma_mem *cmd)
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_get_phy_info *req;
struct be_sge *sge;
int status;
spin_lock_bh(&adapter->mcc_lock);
wrb = wrb_from_mccq(adapter);
if (!wrb) {
status = -EBUSY;
goto err;
}
req = cmd->va;
sge = nonembedded_sgl(wrb);
be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
OPCODE_COMMON_GET_PHY_DETAILS);
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_GET_PHY_DETAILS,
sizeof(*req));
sge->pa_hi = cpu_to_le32(upper_32_bits(cmd->dma));
sge->pa_lo = cpu_to_le32(cmd->dma & 0xFFFFFFFF);
sge->len = cpu_to_le32(cmd->size);
status = be_mcc_notify_wait(adapter);
err:
spin_unlock_bh(&adapter->mcc_lock);
return status;
}
......@@ -144,6 +144,7 @@ struct be_mcc_mailbox {
#define OPCODE_COMMON_ENABLE_DISABLE_BEACON 69
#define OPCODE_COMMON_GET_BEACON_STATE 70
#define OPCODE_COMMON_READ_TRANSRECV_DATA 73
#define OPCODE_COMMON_GET_PHY_DETAILS 102
#define OPCODE_ETH_ACPI_CONFIG 2
#define OPCODE_ETH_PROMISCUOUS 3
......@@ -869,6 +870,30 @@ struct be_cmd_resp_seeprom_read {
u8 seeprom_data[BE_READ_SEEPROM_LEN];
};
enum {
PHY_TYPE_CX4_10GB = 0,
PHY_TYPE_XFP_10GB,
PHY_TYPE_SFP_1GB,
PHY_TYPE_SFP_PLUS_10GB,
PHY_TYPE_KR_10GB,
PHY_TYPE_KX4_10GB,
PHY_TYPE_BASET_10GB,
PHY_TYPE_BASET_1GB,
PHY_TYPE_DISABLED = 255
};
struct be_cmd_req_get_phy_info {
struct be_cmd_req_hdr hdr;
u8 rsvd0[24];
};
struct be_cmd_resp_get_phy_info {
struct be_cmd_req_hdr hdr;
u16 phy_type;
u16 interface_type;
u32 misc_params;
u32 future_use[4];
};
extern int be_pci_fnum_get(struct be_adapter *adapter);
extern int be_cmd_POST(struct be_adapter *adapter);
extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
......@@ -947,4 +972,6 @@ extern int be_cmd_get_seeprom_data(struct be_adapter *adapter,
struct be_dma_mem *nonemb_cmd);
extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
u8 loopback_type, u8 enable);
extern int be_cmd_get_phy_info(struct be_adapter *adapter,
struct be_dma_mem *cmd);
......@@ -314,10 +314,13 @@ static int be_get_sset_count(struct net_device *netdev, int stringset)
static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
struct be_adapter *adapter = netdev_priv(netdev);
u8 mac_speed = 0, connector = 0;
struct be_dma_mem phy_cmd;
struct be_cmd_resp_get_phy_info *resp;
u8 mac_speed = 0;
u16 link_speed = 0;
bool link_up = false;
int status;
u16 intf_type;
if (adapter->link_speed < 0) {
status = be_cmd_link_status_query(adapter, &link_up,
......@@ -337,40 +340,57 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
}
}
status = be_cmd_read_port_type(adapter, adapter->port_num,
&connector);
phy_cmd.size = sizeof(struct be_cmd_req_get_phy_info);
phy_cmd.va = pci_alloc_consistent(adapter->pdev, phy_cmd.size,
&phy_cmd.dma);
if (!phy_cmd.va) {
dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
return -ENOMEM;
}
status = be_cmd_get_phy_info(adapter, &phy_cmd);
if (!status) {
switch (connector) {
case 7:
resp = (struct be_cmd_resp_get_phy_info *) phy_cmd.va;
intf_type = le16_to_cpu(resp->interface_type);
switch (intf_type) {
case PHY_TYPE_XFP_10GB:
case PHY_TYPE_SFP_1GB:
case PHY_TYPE_SFP_PLUS_10GB:
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL;
break;
case 0:
ecmd->port = PORT_TP;
ecmd->transceiver = XCVR_EXTERNAL;
break;
default:
ecmd->port = PORT_TP;
ecmd->transceiver = XCVR_INTERNAL;
break;
}
} else {
ecmd->port = PORT_AUI;
switch (intf_type) {
case PHY_TYPE_KR_10GB:
case PHY_TYPE_KX4_10GB:
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->transceiver = XCVR_INTERNAL;
break;
default:
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->transceiver = XCVR_EXTERNAL;
break;
}
}
/* Save for future use */
adapter->link_speed = ecmd->speed;
adapter->port_type = ecmd->port;
adapter->transceiver = ecmd->transceiver;
adapter->autoneg = ecmd->autoneg;
pci_free_consistent(adapter->pdev, phy_cmd.size,
phy_cmd.va, phy_cmd.dma);
} else {
ecmd->speed = adapter->link_speed;
ecmd->port = adapter->port_type;
ecmd->transceiver = adapter->transceiver;
ecmd->autoneg = adapter->autoneg;
}
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->phy_address = adapter->port_num;
switch (ecmd->port) {
case PORT_FIBRE:
......@@ -384,6 +404,13 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
break;
}
if (ecmd->autoneg) {
ecmd->supported |= SUPPORTED_1000baseT_Full;
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= (ADVERTISED_10000baseT_Full |
ADVERTISED_1000baseT_Full);
}
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册