提交 eb4c41d3 编写于 作者: T Torben Schulz 提交者: Takashi Iwai

ALSA: hda - Improved MacBook 3,1 support

This patch adds support for MacBook 3,1 sound by adding a model new
"mb31" with the appropriate init verbs, mixers and channel modes to
the ALC883 configuration. patch_alc882() and patch_alc883() are
modified to handle the MacBook 3,1 sound-chip (Realtek ALC889A)
correctly.
Signed-off-by: NTorben Schulz <public@letorbi.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 313f6e2d
......@@ -157,6 +157,7 @@ ALC883/888
fujitsu-xa3530 Fujitsu AMILO XA3530
3stack-6ch-intel Intel DG33* boards
asus-p5q ASUS P5Q-EM boards
mb31 MacBook 3,1
auto auto-config reading BIOS (default)
ALC861/660
......
......@@ -240,6 +240,7 @@ enum {
ALC883_3ST_6ch_INTEL,
ALC888_ASUS_M90V,
ALC888_ASUS_EEE1601,
ALC889A_MB31,
ALC1200_ASUS_P5Q,
ALC883_AUTO,
ALC883_MODEL_LAST,
......@@ -7291,7 +7292,7 @@ static int patch_alc882(struct hda_codec *codec)
case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
case 0x106b00a4: /* MacbookPro4,1 */
case 0x106b2c00: /* Macbook Pro rev3 */
case 0x106b3600: /* Macbook 3.1 */
/* Macbook 3.1 (0x106b3600) is handled by patch_alc883() */
case 0x106b3800: /* MacbookPro4,1 - latter revision */
board_config = ALC885_MBP3;
break;
......@@ -7493,6 +7494,17 @@ static struct hda_input_mux alc883_asus_eee1601_capture_source = {
},
};
static struct hda_input_mux alc889A_mb31_capture_source = {
.num_items = 2,
.items = {
{ "Mic", 0x0 },
/* Front Mic (0x01) unused */
{ "Line", 0x2 },
/* Line 2 (0x03) unused */
/* CD (0x04) unsused? */
},
};
/*
* 2ch mode
*/
......@@ -7611,6 +7623,49 @@ static struct hda_channel_mode alc883_sixstack_modes[2] = {
{ 8, alc883_sixstack_ch8_init },
};
/* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */
static struct hda_verb alc889A_mb31_ch2_init[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP as front */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Line as input */
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line off */
{ } /* end */
};
/* 4ch mode (Speaker:front, Subwoofer:CLFE, Line:CLFE, Headphones:front) */
static struct hda_verb alc889A_mb31_ch4_init[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP as front */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Line as output */
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
{ } /* end */
};
/* 5ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:rear) */
static struct hda_verb alc889A_mb31_ch5_init[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* HP as rear */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Line as input */
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line off */
{ } /* end */
};
/* 6ch mode (Speaker:front, Subwoofer:off, Line:CLFE, Headphones:Rear) */
static struct hda_verb alc889A_mb31_ch6_init[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* HP as front */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Subwoofer off */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Line as output */
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
{ } /* end */
};
static struct hda_channel_mode alc889A_mb31_6ch_modes[4] = {
{ 2, alc889A_mb31_ch2_init },
{ 4, alc889A_mb31_ch4_init },
{ 5, alc889A_mb31_ch5_init },
{ 6, alc889A_mb31_ch6_init },
};
static struct hda_verb alc883_medion_eapd_verbs[] = {
/* eanable EAPD on medion laptop */
{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
......@@ -7889,6 +7944,32 @@ static struct snd_kcontrol_new alc888_lenovo_sky_mixer[] = {
{ } /* end */
};
static struct snd_kcontrol_new alc889A_mb31_mixer[] = {
/* Output mixers */
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x00,
HDA_OUTPUT),
HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x00, HDA_OUTPUT),
HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 0x02, HDA_INPUT),
/* Output switches */
HDA_CODEC_MUTE("Enable Speaker", 0x14, 0x00, HDA_OUTPUT),
HDA_CODEC_MUTE("Enable Headphones", 0x15, 0x00, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Enable LFE", 0x16, 2, 0x00, HDA_OUTPUT),
/* Boost mixers */
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
HDA_CODEC_VOLUME("Line Boost", 0x1a, 0x00, HDA_INPUT),
/* Input mixers */
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
{ } /* end */
};
static struct hda_bind_ctls alc883_bind_cap_vol = {
.ops = &snd_hda_bind_vol,
.values = {
......@@ -8561,6 +8642,42 @@ static void alc883_eee1601_inithook(struct hda_codec *codec)
alc_automute_pin(codec);
}
static struct hda_verb alc889A_mb31_verbs[] = {
/* Init rear pin (used as headphone output) */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4}, /* Apple Headphones */
{0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Connect to front */
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Init line pin (used as output in 4ch and 6ch mode) */
{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02}, /* Connect to CLFE */
/* Init line 2 pin (used as headphone out by default) */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Use as input */
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Mute output */
{ } /* end */
};
/* Mute speakers according to the headphone jack state */
static void alc889A_mb31_automute(struct hda_codec *codec)
{
unsigned int present;
/* Mute only in 2ch or 4ch mode */
if (snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_CONNECT_SEL, 0)
== 0x00) {
present = snd_hda_codec_read(codec, 0x15, 0,
AC_VERB_GET_PIN_SENSE, 0) & AC_PINSENSE_PRESENCE;
snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
}
}
static void alc889A_mb31_unsol_event(struct hda_codec *codec, unsigned int res)
{
if ((res >> 26) == ALC880_HP_EVENT)
alc889A_mb31_automute(codec);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
#define alc883_loopbacks alc880_loopbacks
#endif
......@@ -8601,6 +8718,7 @@ static const char *alc883_models[ALC883_MODEL_LAST] = {
[ALC888_FUJITSU_XA3530] = "fujitsu-xa3530",
[ALC883_3ST_6ch_INTEL] = "3stack-6ch-intel",
[ALC1200_ASUS_P5Q] = "asus-p5q",
[ALC889A_MB31] = "mb31",
[ALC883_AUTO] = "auto",
};
......@@ -9052,6 +9170,21 @@ static struct alc_config_preset alc883_presets[] = {
.channel_mode = alc883_sixstack_modes,
.input_mux = &alc883_capture_source,
},
[ALC889A_MB31] = {
.mixers = { alc889A_mb31_mixer, alc883_chmode_mixer},
.init_verbs = { alc883_init_verbs, alc889A_mb31_verbs,
alc880_gpio1_init_verbs },
.adc_nids = alc883_adc_nids,
.num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
.dac_nids = alc883_dac_nids,
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.channel_mode = alc889A_mb31_6ch_modes,
.num_channel_mode = ARRAY_SIZE(alc889A_mb31_6ch_modes),
.input_mux = &alc889A_mb31_capture_source,
.dig_out_nid = ALC883_DIGOUT_NID,
.unsol_event = alc889A_mb31_unsol_event,
.init_hook = alc889A_mb31_automute,
},
};
......@@ -9197,10 +9330,18 @@ static int patch_alc883(struct hda_codec *codec)
board_config = snd_hda_check_board_config(codec, ALC883_MODEL_LAST,
alc883_models,
alc883_cfg_tbl);
if (board_config < 0) {
printk(KERN_INFO "hda_codec: Unknown model for %s, "
"trying auto-probe from BIOS...\n", codec->chip_name);
board_config = ALC883_AUTO;
if (board_config < 0 || board_config >= ALC883_MODEL_LAST) {
/* Pick up systems that don't supply PCI SSID */
switch (codec->subsystem_id) {
case 0x106b3600: /* Macbook 3.1 */
board_config = ALC889A_MB31;
break;
default:
printk(KERN_INFO
"hda_codec: Unknown model for %s, trying "
"auto-probe from BIOS...\n", codec->chip_name);
board_config = ALC883_AUTO;
}
}
if (board_config == ALC883_AUTO) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册