提交 eaa778af 编写于 作者: A Alex Deucher

drm/radeon/atom: add helper to calcuate mpll params

There's a new table for calculating the memory pll
parameters on SI.  Required for SI DPM support.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
上级 e37e6a0e
......@@ -219,6 +219,10 @@ int radeon_atom_get_clock_dividers(struct radeon_device *rdev,
u32 clock,
bool strobe_mode,
struct atom_clock_dividers *dividers);
int radeon_atom_get_memory_pll_dividers(struct radeon_device *rdev,
u32 clock,
bool strobe_mode,
struct atom_mpll_param *mpll_param);
void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 voltage_type);
int radeon_atom_get_voltage_gpio_settings(struct radeon_device *rdev,
u16 voltage_level, u8 voltage_type,
......
......@@ -2833,6 +2833,57 @@ int radeon_atom_get_clock_dividers(struct radeon_device *rdev,
return 0;
}
int radeon_atom_get_memory_pll_dividers(struct radeon_device *rdev,
u32 clock,
bool strobe_mode,
struct atom_mpll_param *mpll_param)
{
COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1 args;
int index = GetIndexIntoMasterTable(COMMAND, ComputeMemoryClockParam);
u8 frev, crev;
memset(&args, 0, sizeof(args));
memset(mpll_param, 0, sizeof(struct atom_mpll_param));
if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
return -EINVAL;
switch (frev) {
case 2:
switch (crev) {
case 1:
/* SI */
args.ulClock = cpu_to_le32(clock); /* 10 khz */
args.ucInputFlag = 0;
if (strobe_mode)
args.ucInputFlag |= MPLL_INPUT_FLAG_STROBE_MODE_EN;
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
mpll_param->clkfrac = le16_to_cpu(args.ulFbDiv.usFbDivFrac);
mpll_param->clkf = le16_to_cpu(args.ulFbDiv.usFbDiv);
mpll_param->post_div = args.ucPostDiv;
mpll_param->dll_speed = args.ucDllSpeed;
mpll_param->bwcntl = args.ucBWCntl;
mpll_param->vco_mode =
(args.ucPllCntlFlag & MPLL_CNTL_FLAG_VCO_MODE_MASK) ? 1 : 0;
mpll_param->yclk_sel =
(args.ucPllCntlFlag & MPLL_CNTL_FLAG_BYPASS_DQ_PLL) ? 1 : 0;
mpll_param->qdr =
(args.ucPllCntlFlag & MPLL_CNTL_FLAG_QDR_ENABLE) ? 1 : 0;
mpll_param->half_rate =
(args.ucPllCntlFlag & MPLL_CNTL_FLAG_AD_HALF_RATE) ? 1 : 0;
break;
default:
return -EINVAL;
}
break;
default:
return -EINVAL;
}
return 0;
}
void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable)
{
DYNAMIC_CLOCK_GATING_PS_ALLOCATION args;
......
......@@ -519,6 +519,30 @@ struct atom_clock_dividers {
u32 flags;
};
struct atom_mpll_param {
union {
struct {
#ifdef __BIG_ENDIAN
u32 reserved : 8;
u32 clkfrac : 12;
u32 clkf : 12;
#else
u32 clkf : 12;
u32 clkfrac : 12;
u32 reserved : 8;
#endif
};
u32 fb_div;
};
u32 post_div;
u32 bwcntl;
u32 dll_speed;
u32 vco_mode;
u32 yclk_sel;
u32 qdr;
u32 half_rate;
};
#define MEM_TYPE_GDDR5 0x50
#define MEM_TYPE_GDDR4 0x40
#define MEM_TYPE_GDDR3 0x30
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册