提交 ea49b750 编写于 作者: J Jayachandran C 提交者: John Crispin

MIPS: PCI: Update XLR/XLS PCI for the new PIC code

Use the nlm_set_pic_extra_ack() call to setup the extra interrupt
ACK needed by XLR PCI and XLS PCIe. Simplify the code by adding
nlm_pci_link_to_irq().
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4561Signed-off-by: NJohn Crispin <blogic@openwrt.org>
上级 e59b008e
......@@ -47,6 +47,7 @@
#include <asm/netlogic/interrupt.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/common.h>
#include <asm/netlogic/xlr/msidef.h>
#include <asm/netlogic/xlr/iomap.h>
......@@ -174,22 +175,9 @@ static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev)
return p ? bus->self : NULL;
}
static int get_irq_vector(const struct pci_dev *dev)
static int nlm_pci_link_to_irq(int link)
{
struct pci_dev *lnk;
if (!nlm_chip_is_xls())
return PIC_PCIX_IRQ; /* for XLR just one IRQ */
/*
* For XLS PCIe, there is an IRQ per Link, find out which
* link the device is on to assign interrupts
*/
lnk = xls_get_pcie_link(dev);
if (lnk == NULL)
return 0;
switch (PCI_SLOT(lnk->devfn)) {
switch (link) {
case 0:
return PIC_PCIE_LINK0_IRQ;
case 1:
......@@ -205,10 +193,26 @@ static int get_irq_vector(const struct pci_dev *dev)
else
return PIC_PCIE_LINK3_IRQ;
}
WARN(1, "Unexpected devfn %d\n", lnk->devfn);
WARN(1, "Unexpected link %d\n", link);
return 0;
}
static int get_irq_vector(const struct pci_dev *dev)
{
struct pci_dev *lnk;
int link;
if (!nlm_chip_is_xls())
return PIC_PCIX_IRQ; /* for XLR just one IRQ */
lnk = xls_get_pcie_link(dev);
if (lnk == NULL)
return 0;
link = PCI_SLOT(lnk->devfn);
return nlm_pci_link_to_irq(link);
}
#ifdef CONFIG_PCI_MSI
void destroy_irq(unsigned int irq)
{
......@@ -332,6 +336,9 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
static int __init pcibios_init(void)
{
void (*extra_ack)(struct irq_data *);
int link, irq;
/* PSB assigns PCI resources */
pci_set_flags(PCI_PROBE_ONLY);
pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20);
......@@ -350,27 +357,19 @@ static int __init pcibios_init(void)
* For PCI interrupts, we need to ack the PCI controller too, overload
* irq handler data to do this
*/
if (nlm_chip_is_xls()) {
if (nlm_chip_is_xls_b()) {
irq_set_handler_data(PIC_PCIE_LINK0_IRQ,
xls_pcie_ack_b);
irq_set_handler_data(PIC_PCIE_LINK1_IRQ,
xls_pcie_ack_b);
irq_set_handler_data(PIC_PCIE_XLSB0_LINK2_IRQ,
xls_pcie_ack_b);
irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ,
xls_pcie_ack_b);
} else {
irq_set_handler_data(PIC_PCIE_LINK0_IRQ, xls_pcie_ack);
irq_set_handler_data(PIC_PCIE_LINK1_IRQ, xls_pcie_ack);
irq_set_handler_data(PIC_PCIE_LINK2_IRQ, xls_pcie_ack);
irq_set_handler_data(PIC_PCIE_LINK3_IRQ, xls_pcie_ack);
}
} else {
if (!nlm_chip_is_xls()) {
/* XLR PCI controller ACK */
irq_set_handler_data(PIC_PCIX_IRQ, xlr_pci_ack);
nlm_set_pic_extra_ack(0, PIC_PCIX_IRQ, xlr_pci_ack);
} else {
if (nlm_chip_is_xls_b())
extra_ack = xls_pcie_ack_b;
else
extra_ack = xls_pcie_ack;
for (link = 0; link < 4; link++) {
irq = nlm_pci_link_to_irq(link);
nlm_set_pic_extra_ack(0, irq, extra_ack);
}
}
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册