提交 e97ff121 编写于 作者: V Vineet Gupta

ARC: [Review] Multi-platform image #4: Isolate platform headers

-Top level ARC makefile removes -I for platform headers
-asm/irq.h no longer includes plat/irq.h

-platform makefile adds -I for it's specfic platform headers
-platform code to directly include it's plat/irq.h

-Linker script needed plat/memmap.h for CCM info, already in .config
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
上级 877768c8
...@@ -10,14 +10,6 @@ UTS_MACHINE := arc ...@@ -10,14 +10,6 @@ UTS_MACHINE := arc
KBUILD_DEFCONFIG := fpga_defconfig KBUILD_DEFCONFIG := fpga_defconfig
# For ARC FPGA Platforms
platform-$(CONFIG_ARC_PLAT_FPGA_LEGACY) := arcfpga
#New platform adds here
PLATFORM := $(platform-y)
export PLATFORM
cflags-y += -Iarch/arc/plat-$(PLATFORM)/include
cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__ cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__
LINUXINCLUDE += -include ${src}/arch/arc/include/asm/defines.h LINUXINCLUDE += -include ${src}/arch/arc/include/asm/defines.h
...@@ -86,9 +78,6 @@ KBUILD_CFLAGS += $(cflags-y) ...@@ -86,9 +78,6 @@ KBUILD_CFLAGS += $(cflags-y)
KBUILD_AFLAGS += $(KBUILD_CFLAGS) KBUILD_AFLAGS += $(KBUILD_CFLAGS)
LDFLAGS += $(ldflags-y) LDFLAGS += $(ldflags-y)
# Needed for Linker script preprocessing
KBUILD_CPPFLAGS += -Iarch/arc/plat-$(PLATFORM)/include
head-y := arch/arc/kernel/head.o head-y := arch/arc/kernel/head.o
# See arch/arc/Kbuild for content of core part of the kernel # See arch/arc/Kbuild for content of core part of the kernel
...@@ -97,10 +86,7 @@ core-y += arch/arc/ ...@@ -97,10 +86,7 @@ core-y += arch/arc/
# w/o this dtb won't embed into kernel binary # w/o this dtb won't embed into kernel binary
core-y += arch/arc/boot/dts/ core-y += arch/arc/boot/dts/
# w/o this ifneq, make ARCH=arc clean was crapping out core-$(CONFIG_ARC_PLAT_FPGA_LEGACY) += arch/arc/plat-arcfpga/
ifneq ($(platform-y),)
core-y += arch/arc/plat-$(PLATFORM)/
endif
drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/ drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/
......
...@@ -13,7 +13,6 @@ ...@@ -13,7 +13,6 @@
#define TIMER0_IRQ 3 #define TIMER0_IRQ 3
#define TIMER1_IRQ 4 #define TIMER1_IRQ 4
#include <plat/irq.h> /* Board Specific IRQ assignments */
#include <asm-generic/irq.h> #include <asm-generic/irq.h>
extern void __init arc_init_IRQ(void); extern void __init arc_init_IRQ(void);
......
...@@ -10,7 +10,6 @@ ...@@ -10,7 +10,6 @@
#include <asm/cache.h> #include <asm/cache.h>
#include <asm/page.h> #include <asm/page.h>
#include <asm/thread_info.h> #include <asm/thread_info.h>
#include <plat/memmap.h>
OUTPUT_ARCH(arc) OUTPUT_ARCH(arc)
ENTRY(_stext) ENTRY(_stext)
......
...@@ -6,5 +6,7 @@ ...@@ -6,5 +6,7 @@
# published by the Free Software Foundation. # published by the Free Software Foundation.
# #
KBUILD_CFLAGS += -Iarch/arc/plat-arcfpga/include
obj-y := platform.o irq.o obj-y := platform.o irq.o
obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP) += smp.o
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
*/ */
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <asm/irq.h> #include <plat/irq.h>
void __init plat_fpga_init_IRQ(void) void __init plat_fpga_init_IRQ(void)
{ {
......
...@@ -16,11 +16,11 @@ ...@@ -16,11 +16,11 @@
#include <linux/console.h> #include <linux/console.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/irq.h>
#include <asm/clk.h> #include <asm/clk.h>
#include <asm/mach_desc.h> #include <asm/mach_desc.h>
#include <plat/memmap.h> #include <plat/memmap.h>
#include <plat/smp.h> #include <plat/smp.h>
#include <plat/irq.h>
/*-----------------------BVCI Latency Unit -----------------------------*/ /*-----------------------BVCI Latency Unit -----------------------------*/
......
...@@ -12,7 +12,8 @@ ...@@ -12,7 +12,8 @@
*/ */
#include <linux/smp.h> #include <linux/smp.h>
#include <asm/irq.h> #include <linux/irq.h>
#include <plat/irq.h>
#include <plat/smp.h> #include <plat/smp.h>
static char smp_cpuinfo_buf[128]; static char smp_cpuinfo_buf[128];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册