e1000e: cleanup whitespace

Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/80003es2lan.c

@@ -66,17 +66,17 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
 	s32 ret_val;
 
 	if (hw->phy.media_type != e1000_media_type_copper) {
-		phy->type	= e1000_phy_none;
+		phy->type = e1000_phy_none;
 		return 0;
 	} else {
 		phy->ops.power_up = e1000_power_up_phy_copper;
 		phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan;
 	}
 
-	phy->addr		= 1;
-	phy->autoneg_mask	= AUTONEG_ADVERTISE_SPEED_DEFAULT;
-	phy->reset_delay_us      = 100;
-	phy->type		= e1000_phy_gg82563;
+	phy->addr = 1;
+	phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+	phy->reset_delay_us = 100;
+	phy->type = e1000_phy_gg82563;
 
 	/* This can only be done after all function pointers are setup. */
 	ret_val = e1000e_get_phy_id(hw);
@@ -98,19 +98,19 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
 	u32 eecd = er32(EECD);
 	u16 size;
 
-	nvm->opcode_bits	= 8;
-	nvm->delay_usec	 = 1;
+	nvm->opcode_bits = 8;
+	nvm->delay_usec = 1;
 	switch (nvm->override) {
 	case e1000_nvm_override_spi_large:
-		nvm->page_size    = 32;
+		nvm->page_size = 32;
 		nvm->address_bits = 16;
 		break;
 	case e1000_nvm_override_spi_small:
-		nvm->page_size    = 8;
+		nvm->page_size = 8;
 		nvm->address_bits = 8;
 		break;
 	default:
-		nvm->page_size    = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+		nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
 		nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
 		break;
 	}
@@ -128,7 +128,7 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
 	/* EEPROM access above 16k is unsupported */
 	if (size > 14)
 		size = 14;
-	nvm->word_size	= 1 << size;
+	nvm->word_size = 1 << size;
 
 	return 0;
 }
@@ -859,7 +859,7 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw)
 
 	/* Transmit Arbitration Control 0 */
 	reg = er32(TARC(0));
-	reg &= ~(0xF << 27); /* 30:27 */
+	reg &= ~(0xF << 27);	/* 30:27 */
 	if (hw->phy.media_type != e1000_media_type_copper)
 		reg &= ~(1 << 20);
 	ew32(TARC(0), reg);

drivers/net/ethernet/intel/e1000e/82571.c

@@ -77,24 +77,24 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 		return 0;
 	}
 
-	phy->addr			 = 1;
-	phy->autoneg_mask		 = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-	phy->reset_delay_us		 = 100;
+	phy->addr = 1;
+	phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+	phy->reset_delay_us = 100;
 
-	phy->ops.power_up		 = e1000_power_up_phy_copper;
-	phy->ops.power_down		 = e1000_power_down_phy_copper_82571;
+	phy->ops.power_up = e1000_power_up_phy_copper;
+	phy->ops.power_down = e1000_power_down_phy_copper_82571;
 
 	switch (hw->mac.type) {
 	case e1000_82571:
 	case e1000_82572:
-		phy->type		 = e1000_phy_igp_2;
+		phy->type = e1000_phy_igp_2;
 		break;
 	case e1000_82573:
-		phy->type		 = e1000_phy_m88;
+		phy->type = e1000_phy_m88;
 		break;
 	case e1000_82574:
 	case e1000_82583:
-		phy->type		 = e1000_phy_bm;
+		phy->type = e1000_phy_bm;
 		phy->ops.acquire = e1000_get_hw_semaphore_82574;
 		phy->ops.release = e1000_put_hw_semaphore_82574;
 		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
@@ -193,7 +193,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
 		/* EEPROM access above 16k is unsupported */
 		if (size > 14)
 			size = 14;
-		nvm->word_size	= 1 << size;
+		nvm->word_size = 1 << size;
 		break;
 	}
 
@@ -339,7 +339,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw)
 static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	static int global_quad_port_a; /* global port a indication */
+	static int global_quad_port_a;	/* global port a indication */
 	struct pci_dev *pdev = adapter->pdev;
 	int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
 	s32 rc;
@@ -1178,7 +1178,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 
 	/* Transmit Arbitration Control 0 */
 	reg = er32(TARC(0));
-	reg &= ~(0xF << 27); /* 30:27 */
+	reg &= ~(0xF << 27);	/* 30:27 */
 	switch (hw->mac.type) {
 	case e1000_82571:
 	case e1000_82572:
@@ -1390,7 +1390,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw)
 	ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors);
 	if (ret_val)
 		return false;
-	if (receive_errors == E1000_RECEIVE_ERROR_MAX)  {
+	if (receive_errors == E1000_RECEIVE_ERROR_MAX) {
 		ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt);
 		if (ret_val)
 			return false;

drivers/net/ethernet/intel/e1000e/ethtool.c

@@ -244,7 +244,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
 		mac->autoneg = 1;
 		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
 		break;
-	case SPEED_1000 + DUPLEX_HALF: /* not supported */
+	case SPEED_1000 + DUPLEX_HALF:	/* not supported */
 	default:
 		goto err_inval;
 	}
@@ -416,7 +416,7 @@ static void e1000_set_msglevel(struct net_device *netdev, u32 data)
 
 static int e1000_get_regs_len(struct net_device __always_unused *netdev)
 {
-#define E1000_REGS_LEN 32 /* overestimate */
+#define E1000_REGS_LEN 32	/* overestimate */
 	return E1000_REGS_LEN * sizeof(u32);
 }
 
@@ -433,22 +433,22 @@ static void e1000_get_regs(struct net_device *netdev,
 	regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
 	    adapter->pdev->device;
 
-	regs_buff[0]  = er32(CTRL);
-	regs_buff[1]  = er32(STATUS);
+	regs_buff[0] = er32(CTRL);
+	regs_buff[1] = er32(STATUS);
 
-	regs_buff[2]  = er32(RCTL);
-	regs_buff[3]  = er32(RDLEN(0));
-	regs_buff[4]  = er32(RDH(0));
-	regs_buff[5]  = er32(RDT(0));
-	regs_buff[6]  = er32(RDTR);
+	regs_buff[2] = er32(RCTL);
+	regs_buff[3] = er32(RDLEN(0));
+	regs_buff[4] = er32(RDH(0));
+	regs_buff[5] = er32(RDT(0));
+	regs_buff[6] = er32(RDTR);
 
-	regs_buff[7]  = er32(TCTL);
-	regs_buff[8]  = er32(TDLEN(0));
-	regs_buff[9]  = er32(TDH(0));
+	regs_buff[7] = er32(TCTL);
+	regs_buff[8] = er32(TDLEN(0));
+	regs_buff[9] = er32(TDH(0));
 	regs_buff[10] = er32(TDT(0));
 	regs_buff[11] = er32(TIDV);
 
-	regs_buff[12] = adapter->hw.phy.type;  /* PHY type (IGP=1, M88=0) */
+	regs_buff[12] = adapter->hw.phy.type;	/* PHY type (IGP=1, M88=0) */
 
 	/* ethtool doesn't use anything past this point, so all this
 	 * code is likely legacy junk for apps that may or may not exist
@@ -1379,7 +1379,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 
 	if (hw->phy.media_type == e1000_media_type_copper &&
 	    hw->phy.type == e1000_phy_m88) {
-		ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+		ctrl_reg |= E1000_CTRL_ILOS;	/* Invert Loss of Signal */
 	} else {
 		/* Set the ILOS bit on the fiber Nic if half duplex link is
 		 * detected.
@@ -1613,7 +1613,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 		ew32(TDT(0), k);
 		e1e_flush();
 		msleep(200);
-		time = jiffies; /* set the start time for the receive */
+		time = jiffies;	/* set the start time for the receive */
 		good_cnt = 0;
 		/* receive the sent packets */
 		do {
@@ -1636,11 +1636,11 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 			 */
 		} while ((good_cnt < 64) && !time_after(jiffies, time + 20));
 		if (good_cnt != 64) {
-			ret_val = 13; /* ret_val is the same as mis-compare */
+			ret_val = 13;	/* ret_val is the same as mis-compare */
 			break;
 		}
 		if (jiffies >= (time + 20)) {
-			ret_val = 14; /* error code for time out error */
+			ret_val = 14;	/* error code for time out error */
 			break;
 		}
 	}

drivers/net/ethernet/intel/e1000e/hw.h

@@ -402,13 +402,13 @@ struct e1000_phy_stats {
 
 struct e1000_host_mng_dhcp_cookie {
 	u32 signature;
-	u8  status;
-	u8  reserved0;
+	u8 status;
+	u8 reserved0;
 	u16 vlan_id;
 	u32 reserved1;
 	u16 reserved2;
-	u8  reserved3;
-	u8  checksum;
+	u8 reserved3;
+	u8 checksum;
 };
 
 /* Host Interface "Rev 1" */
@@ -427,8 +427,8 @@ struct e1000_host_command_info {
 
 /* Host Interface "Rev 2" */
 struct e1000_host_mng_command_header {
-	u8  command_id;
-	u8  checksum;
+	u8 command_id;
+	u8 checksum;
 	u16 reserved1;
 	u16 reserved2;
 	u16 command_length;
@@ -549,7 +549,7 @@ struct e1000_mac_info {
 	u32 mta_shadow[MAX_MTA_REG];
 	u16 rar_entry_count;
 
-	u8  forced_speed_duplex;
+	u8 forced_speed_duplex;
 
 	bool adaptive_ifs;
 	bool has_fwsm;
@@ -577,7 +577,7 @@ struct e1000_phy_info {
 
 	u32 addr;
 	u32 id;
-	u32 reset_delay_us; /* in usec */
+	u32 reset_delay_us;	/* in usec */
 	u32 revision;
 
 	enum e1000_media_type media_type;
@@ -636,11 +636,11 @@ struct e1000_dev_spec_82571 {
 };
 
 struct e1000_dev_spec_80003es2lan {
-	bool  mdic_wa_enable;
+	bool mdic_wa_enable;
 };
 
 struct e1000_shadow_ram {
-	u16  value;
+	u16 value;
 	bool modified;
 };
 
@@ -660,17 +660,17 @@ struct e1000_hw {
 	void __iomem *hw_addr;
 	void __iomem *flash_address;
 
-	struct e1000_mac_info  mac;
-	struct e1000_fc_info   fc;
-	struct e1000_phy_info  phy;
-	struct e1000_nvm_info  nvm;
-	struct e1000_bus_info  bus;
+	struct e1000_mac_info mac;
+	struct e1000_fc_info fc;
+	struct e1000_phy_info phy;
+	struct e1000_nvm_info nvm;
+	struct e1000_bus_info bus;
 	struct e1000_host_mng_dhcp_cookie mng_cookie;
 
 	union {
-		struct e1000_dev_spec_82571	e82571;
+		struct e1000_dev_spec_82571 e82571;
 		struct e1000_dev_spec_80003es2lan e80003es2lan;
-		struct e1000_dev_spec_ich8lan	ich8lan;
+		struct e1000_dev_spec_ich8lan ich8lan;
 	} dev_spec;
 };
 

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -101,12 +101,12 @@ union ich8_hws_flash_regacc {
 /* ICH Flash Protected Region */
 union ich8_flash_protected_range {
 	struct ich8_pr {
-		u32 base:13;     /* 0:12 Protected Range Base */
-		u32 reserved1:2; /* 13:14 Reserved */
-		u32 rpe:1;       /* 15 Read Protection Enable */
-		u32 limit:13;    /* 16:28 Protected Range Limit */
-		u32 reserved2:2; /* 29:30 Reserved */
-		u32 wpe:1;       /* 31 Write Protection Enable */
+		u32 base:13;	/* 0:12 Protected Range Base */
+		u32 reserved1:2;	/* 13:14 Reserved */
+		u32 rpe:1;	/* 15 Read Protection Enable */
+		u32 limit:13;	/* 16:28 Protected Range Limit */
+		u32 reserved2:2;	/* 29:30 Reserved */
+		u32 wpe:1;	/* 31 Write Protection Enable */
 	} range;
 	u32 regval;
 };
@@ -362,21 +362,21 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
 
-	phy->addr                     = 1;
-	phy->reset_delay_us           = 100;
-
-	phy->ops.set_page             = e1000_set_page_igp;
-	phy->ops.read_reg             = e1000_read_phy_reg_hv;
-	phy->ops.read_reg_locked      = e1000_read_phy_reg_hv_locked;
-	phy->ops.read_reg_page        = e1000_read_phy_reg_page_hv;
-	phy->ops.set_d0_lplu_state    = e1000_set_lplu_state_pchlan;
-	phy->ops.set_d3_lplu_state    = e1000_set_lplu_state_pchlan;
-	phy->ops.write_reg            = e1000_write_phy_reg_hv;
-	phy->ops.write_reg_locked     = e1000_write_phy_reg_hv_locked;
-	phy->ops.write_reg_page       = e1000_write_phy_reg_page_hv;
-	phy->ops.power_up             = e1000_power_up_phy_copper;
-	phy->ops.power_down           = e1000_power_down_phy_copper_ich8lan;
-	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+	phy->addr = 1;
+	phy->reset_delay_us = 100;
+
+	phy->ops.set_page = e1000_set_page_igp;
+	phy->ops.read_reg = e1000_read_phy_reg_hv;
+	phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked;
+	phy->ops.read_reg_page = e1000_read_phy_reg_page_hv;
+	phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan;
+	phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan;
+	phy->ops.write_reg = e1000_write_phy_reg_hv;
+	phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked;
+	phy->ops.write_reg_page = e1000_write_phy_reg_page_hv;
+	phy->ops.power_up = e1000_power_up_phy_copper;
+	phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
+	phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
 	phy->id = e1000_phy_unknown;
 
@@ -445,11 +445,11 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 i = 0;
 
-	phy->addr			= 1;
-	phy->reset_delay_us		= 100;
+	phy->addr = 1;
+	phy->reset_delay_us = 100;
 
-	phy->ops.power_up               = e1000_power_up_phy_copper;
-	phy->ops.power_down             = e1000_power_down_phy_copper_ich8lan;
+	phy->ops.power_up = e1000_power_up_phy_copper;
+	phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
 
 	/* We may need to do this twice - once for IGP and if that fails,
 	 * we'll set BM func pointers and try again
@@ -457,7 +457,7 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 	ret_val = e1000e_determine_phy_address(hw);
 	if (ret_val) {
 		phy->ops.write_reg = e1000e_write_phy_reg_bm;
-		phy->ops.read_reg  = e1000e_read_phy_reg_bm;
+		phy->ops.read_reg = e1000e_read_phy_reg_bm;
 		ret_val = e1000e_determine_phy_address(hw);
 		if (ret_val) {
 			e_dbg("Cannot determine PHY addr. Erroring out\n");
@@ -560,7 +560,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
 	/* Clear shadow ram */
 	for (i = 0; i < nvm->word_size; i++) {
 		dev_spec->shadow_ram[i].modified = false;
-		dev_spec->shadow_ram[i].value    = 0xFFFF;
+		dev_spec->shadow_ram[i].value = 0xFFFF;
 	}
 
 	return 0;
@@ -1012,7 +1012,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	hw->dev_spec.ich8lan.eee_lp_ability = 0;
 
 	if (!link)
-		return 0; /* No link detected */
+		return 0;	/* No link detected */
 
 	mac->get_link_status = false;
 
@@ -2816,7 +2816,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 	s32 ret_val = -E1000_ERR_NVM;
 	u8 count = 0;
 
-	if (size < 1  || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
+	if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
 		return -E1000_ERR_NVM;
 
 	flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
@@ -2939,7 +2939,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 * write to bank 0 etc.  We also need to erase the segment that
 	 * is going to be written
 	 */
-	ret_val =  e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
 	if (ret_val) {
 		e_dbg("Could not detect valid bank, assuming bank 0\n");
 		bank = 0;
@@ -4073,7 +4073,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
 {
 	u32 reg;
 	u16 data;
-	u8  retry = 0;
+	u8 retry = 0;
 
 	if (hw->phy.type != e1000_phy_igp_3)
 		return;

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -1196,7 +1196,7 @@ static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring)
 	while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
 		bool cleaned = false;
-		rmb(); /* read buffer_info after eop_desc */
+		rmb();		/* read buffer_info after eop_desc */
 		for (; !cleaned; count++) {
 			tx_desc = E1000_TX_DESC(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
@@ -1385,7 +1385,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done,
 
 				skb_put(skb, l1);
 				goto copydone;
-			} /* if */
+			}	/* if */
 		}
 
 		for (j = 0; j < PS_PAGE_BUFFERS; j++) {
@@ -1800,7 +1800,7 @@ static irqreturn_t e1000_intr(int __always_unused irq, void *data)
 	u32 rctl, icr = er32(ICR);
 
 	if (!icr || test_bit(__E1000_DOWN, &adapter->state))
-		return IRQ_NONE;  /* Not our interrupt */
+		return IRQ_NONE;	/* Not our interrupt */
 
 	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
 	 * not set, then the adapter didn't send an interrupt
@@ -2487,7 +2487,7 @@ static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes)
 		else if ((packets < 5) && (bytes > 512))
 			retval = low_latency;
 		break;
-	case low_latency:  /* 50 usec aka 20000 ints/s */
+	case low_latency:	/* 50 usec aka 20000 ints/s */
 		if (bytes > 10000) {
 			/* this if handles the TSO accounting */
 			if (bytes / packets > 8000)
@@ -2502,7 +2502,7 @@ static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes)
 			retval = lowest_latency;
 		}
 		break;
-	case bulk_latency: /* 250 usec aka 4000 ints/s */
+	case bulk_latency:	/* 250 usec aka 4000 ints/s */
 		if (bytes > 25000) {
 			if (packets > 35)
 				retval = low_latency;
@@ -2554,7 +2554,7 @@ static void e1000_set_itr(struct e1000_adapter *adapter)
 		new_itr = 70000;
 		break;
 	case low_latency:
-		new_itr = 20000; /* aka hwitr = ~200 */
+		new_itr = 20000;	/* aka hwitr = ~200 */
 		break;
 	case bulk_latency:
 		new_itr = 4000;
@@ -3104,13 +3104,13 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 		/* UPE and MPE will be handled by normal PROMISC logic
 		 * in e1000e_set_rx_mode
 		 */
-		rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
-			 E1000_RCTL_BAM | /* RX All Bcast Pkts */
-			 E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
+		rctl |= (E1000_RCTL_SBP |	/* Receive bad packets */
+			 E1000_RCTL_BAM |	/* RX All Bcast Pkts */
+			 E1000_RCTL_PMCF);	/* RX All MAC Ctrl Pkts */
 
-		rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
-			  E1000_RCTL_DPF | /* Allow filtered pause */
-			  E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
+		rctl &= ~(E1000_RCTL_VFE |	/* Disable VLAN filter */
+			  E1000_RCTL_DPF |	/* Allow filtered pause */
+			  E1000_RCTL_CFIEN);	/* Dis VLAN CFIEN Filter */
 		/* Do not mess with E1000_CTRL_VME, it affects transmit as well,
 		 * and that breaks VLANs.
 		 */
@@ -3799,7 +3799,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
 		hwm = min(((pba << 10) * 9 / 10),
 			  ((pba << 10) - adapter->max_frame_size));
 
-		fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+		fc->high_water = hwm & E1000_FCRTH_RTH;	/* 8-byte granularity */
 		fc->low_water = fc->high_water - 8;
 		break;
 	case e1000_pchlan:
@@ -3808,10 +3808,10 @@ void e1000e_reset(struct e1000_adapter *adapter)
 		 */
 		if (adapter->netdev->mtu > ETH_DATA_LEN) {
 			fc->high_water = 0x3500;
-			fc->low_water  = 0x1500;
+			fc->low_water = 0x1500;
 		} else {
 			fc->high_water = 0x5000;
-			fc->low_water  = 0x3000;
+			fc->low_water = 0x3000;
 		}
 		fc->refresh_time = 0x1000;
 		break;
@@ -4581,7 +4581,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.crcerrs += er32(CRCERRS);
 	adapter->stats.gprc += er32(GPRC);
 	adapter->stats.gorc += er32(GORCL);
-	er32(GORCH); /* Clear gorc */
+	er32(GORCH);		/* Clear gorc */
 	adapter->stats.bprc += er32(BPRC);
 	adapter->stats.mprc += er32(MPRC);
 	adapter->stats.roc += er32(ROC);
@@ -4614,7 +4614,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.xofftxc += er32(XOFFTXC);
 	adapter->stats.gptc += er32(GPTC);
 	adapter->stats.gotc += er32(GOTCL);
-	er32(GOTCH); /* Clear gotc */
+	er32(GOTCH);		/* Clear gotc */
 	adapter->stats.rnbc += er32(RNBC);
 	adapter->stats.ruc += er32(RUC);
 
@@ -5106,13 +5106,13 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb)
 	context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
 	buffer_info = &tx_ring->buffer_info[i];
 
-	context_desc->lower_setup.ip_fields.ipcss  = ipcss;
-	context_desc->lower_setup.ip_fields.ipcso  = ipcso;
-	context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
+	context_desc->lower_setup.ip_fields.ipcss = ipcss;
+	context_desc->lower_setup.ip_fields.ipcso = ipcso;
+	context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
 	context_desc->upper_setup.tcp_fields.tucss = tucss;
 	context_desc->upper_setup.tcp_fields.tucso = tucso;
 	context_desc->upper_setup.tcp_fields.tucse = 0;
-	context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
+	context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
 	context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
 	context_desc->cmd_and_length = cpu_to_le32(cmd_length);
 
@@ -5363,7 +5363,7 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
 				    struct sk_buff *skb)
 {
-	struct e1000_hw *hw =  &adapter->hw;
+	struct e1000_hw *hw = &adapter->hw;
 	u16 length, offset;
 
 	if (vlan_tx_tag_present(skb) &&
@@ -6259,7 +6259,7 @@ static void e1000_netpoll(struct net_device *netdev)
 		e1000_intr_msi(adapter->pdev->irq, netdev);
 		enable_irq(adapter->pdev->irq);
 		break;
-	default: /* E1000E_INT_MODE_LEGACY */
+	default:		/* E1000E_INT_MODE_LEGACY */
 		disable_irq(adapter->pdev->irq);
 		e1000_intr(adapter->pdev->irq, netdev);
 		enable_irq(adapter->pdev->irq);
@@ -6589,9 +6589,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
 
 	/* construct the net_device struct */
-	netdev->netdev_ops		= &e1000e_netdev_ops;
+	netdev->netdev_ops = &e1000e_netdev_ops;
 	e1000e_set_ethtool_ops(netdev);
-	netdev->watchdog_timeo		= 5 * HZ;
+	netdev->watchdog_timeo = 5 * HZ;
 	netif_napi_add(netdev, &adapter->napi, e1000e_poll, 64);
 	strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
 
@@ -7034,7 +7034,6 @@ static void __exit e1000_exit_module(void)
 }
 module_exit(e1000_exit_module);
 
-
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
 MODULE_LICENSE("GPL");

drivers/net/ethernet/intel/e1000e/nvm.c

@@ -117,7 +117,6 @@ static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
 	u16 data;
 
 	eecd = er32(EECD);
-
 	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
 	data = 0;
 

drivers/net/ethernet/intel/e1000e/phy.c

@@ -1583,13 +1583,13 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
 	case e1000_phy_gg82563:
 	case e1000_phy_bm:
 	case e1000_phy_82578:
-		offset	= M88E1000_PHY_SPEC_STATUS;
-		mask	= M88E1000_PSSR_DOWNSHIFT;
+		offset = M88E1000_PHY_SPEC_STATUS;
+		mask = M88E1000_PSSR_DOWNSHIFT;
 		break;
 	case e1000_phy_igp_2:
 	case e1000_phy_igp_3:
-		offset	= IGP01E1000_PHY_LINK_HEALTH;
-		mask	= IGP01E1000_PLHR_SS_DOWNGRADE;
+		offset = IGP01E1000_PHY_LINK_HEALTH;
+		mask = IGP01E1000_PLHR_SS_DOWNGRADE;
 		break;
 	default:
 		/* speed downshift not supported */
@@ -1653,14 +1653,14 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw)
 
 	if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
 	    IGP01E1000_PSSR_SPEED_1000MBPS) {
-		offset	= IGP01E1000_PHY_PCS_INIT_REG;
-		mask	= IGP01E1000_PHY_POLARITY_MASK;
+		offset = IGP01E1000_PHY_PCS_INIT_REG;
+		mask = IGP01E1000_PHY_POLARITY_MASK;
 	} else {
 		/* This really only applies to 10Mbps since
 		 * there is no polarity for 100Mbps (always 0).
 		 */
-		offset	= IGP01E1000_PHY_PORT_STATUS;
-		mask	= IGP01E1000_PSSR_POLARITY_REVERSED;
+		offset = IGP01E1000_PHY_PORT_STATUS;
+		mask = IGP01E1000_PSSR_POLARITY_REVERSED;
 	}
 
 	ret_val = e1e_rphy(hw, offset, &data);
@@ -1900,7 +1900,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
 s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	s32  ret_val;
+	s32 ret_val;
 	u16 phy_data;
 	bool link;
 
@@ -2253,7 +2253,7 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
 	case M88E1011_I_PHY_ID:
 		phy_type = e1000_phy_m88;
 		break;
-	case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */
+	case IGP01E1000_I_PHY_ID:	/* IGP 1 & 2 share this */
 		phy_type = e1000_phy_igp_2;
 		break;
 	case GG82563_E_PHY_ID:
@@ -2317,7 +2317,7 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw)
 			/* If phy_type is valid, break - we found our
 			 * PHY address
 			 */
-			if (phy_type  != e1000_phy_unknown)
+			if (phy_type != e1000_phy_unknown)
 				return 0;
 
 			usleep_range(1000, 2000);