提交 e798bd95 编写于 作者: P Paul A. Clarke 提交者: Linus Torvalds

matroxfb: rectify jitter (G450/G550)

This builds upon my previous attempts to resolve some jitter problems seen
with the Matrox G450 and G550 -based cards, including odd disparities observed
between x86 and Power -based machines in a somewhat less hackish way (removing
the hacked ifdefs).

Apparently, preference should be given to use the DVI PLL when frequencies
permit, the Standard PLL otherwise.  The max pixel clock for the panellink
interface is extracted from the PInS information on the card and used as a
limit to determine which PLL to use.
Signed-off-by: NPaul A. Clarke <pc@us.ibm.com>
Acked-by: NPetr Vandrovec <petr@vandrovec.name>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 acb73865
......@@ -331,16 +331,19 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
tmp |= M1064_XPIXCLKCTRL_PLL_UP;
}
matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp);
#ifdef __powerpc__
/* This is necessary to avoid jitter on PowerPC
* (OpenFirmware) systems, but apparently
* introduces jitter, at least on a x86-64
* using DVI.
* A simple workaround is disable for non-PPC.
*/
matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL, 0);
#endif /* __powerpc__ */
matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl);
/* DVI PLL preferred for frequencies up to
panel link max, standard PLL otherwise */
if (fout >= MINFO->max_pixel_clock_panellink)
tmp = 0;
else tmp =
M1064_XDVICLKCTRL_DVIDATAPATHSEL |
M1064_XDVICLKCTRL_C1DVICLKSEL |
M1064_XDVICLKCTRL_C1DVICLKEN |
M1064_XDVICLKCTRL_DVILOOPCTL |
M1064_XDVICLKCTRL_P1LOOPBWDTCTL;
matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL,tmp);
matroxfb_DAC_out(PMINFO M1064_XPWRCTRL,
xpwrctrl);
matroxfb_DAC_unlock_irqrestore(flags);
}
......
......@@ -33,6 +33,21 @@ void DAC1064_global_restore(WPMINFO2);
#define M1064_XCURCTRL_3COLOR 0x01 /* transparent, 0, 1, 2 */
#define M1064_XCURCTRL_XGA 0x02 /* 0, 1, transparent, complement */
#define M1064_XCURCTRL_XWIN 0x03 /* transparent, transparent, 0, 1 */
/* drive DVI by standard(0)/DVI(1) PLL */
/* if set(1), C?DVICLKEN and C?DVICLKSEL must be set(1) */
#define M1064_XDVICLKCTRL_DVIDATAPATHSEL 0x01
/* drive CRTC1 by standard(0)/DVI(1) PLL */
#define M1064_XDVICLKCTRL_C1DVICLKSEL 0x02
/* drive CRTC2 by standard(0)/DVI(1) PLL */
#define M1064_XDVICLKCTRL_C2DVICLKSEL 0x04
/* pixel clock allowed to(0)/blocked from(1) driving CRTC1 */
#define M1064_XDVICLKCTRL_C1DVICLKEN 0x08
/* DVI PLL loop filter bandwidth selection bits */
#define M1064_XDVICLKCTRL_DVILOOPCTL 0x30
/* CRTC2 pixel clock allowed to(0)/blocked from(1) driving CRTC2 */
#define M1064_XDVICLKCTRL_C2DVICLKEN 0x40
/* P1PLL loop filter bandwith selection */
#define M1064_XDVICLKCTRL_P1LOOPBWDTCTL 0x80
#define M1064_XCURCOL0RED 0x08
#define M1064_XCURCOL0GREEN 0x09
#define M1064_XCURCOL0BLUE 0x0A
......
......@@ -424,6 +424,7 @@ struct matrox_fb_info {
} mmio;
unsigned int max_pixel_clock;
unsigned int max_pixel_clock_panellink;
struct matrox_switch* hw_switch;
......
......@@ -658,6 +658,7 @@ static int parse_pins5(WPMINFO const struct matrox_bios* bd) {
MINFO->values.reg.mctlwtst_core = (MINFO->values.reg.mctlwtst & ~7) |
wtst_xlat[MINFO->values.reg.mctlwtst & 7];
}
MINFO->max_pixel_clock_panellink = bd->pins[47] * 4000;
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册