提交 e5371ac5 编写于 作者: R Rusty Russell 提交者: Linus Torvalds

update boot spec to 2.07

Updates for version 2.07 of the boot protocol.  This includes:

load_flags.KEEP_SEGMENTS- flag to request/inhibit segment reloads
hardware_subarch	- what subarchitecture we're booting under
hardware_subarch_data	- per-architecture data

The intention of these changes is to make booting a paravirtualized
kernel work via the normal Linux boot protocol.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 55b70a03
......@@ -168,6 +168,8 @@ Offset Proto Name Meaning
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
0235/3 N/A pad2 Unused
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data
(1) For backwards compatibility, if the setup_sects field contains 0, the
real value is 4.
......@@ -204,7 +206,7 @@ boot loaders can ignore those fields.
The byte order of all fields is littleendian (this is x86, after all.)
Field name: setup_secs
Field name: setup_sects
Type: read
Offset/size: 0x1f1/1
Protocol: ALL
......@@ -356,6 +358,13 @@ Protocol: 2.00+
- If 0, the protected-mode code is loaded at 0x10000.
- If 1, the protected-mode code is loaded at 0x100000.
Bit 6 (write): KEEP_SEGMENTS
Protocol: 2.07+
- if 0, reload the segment registers in the 32bit entry point.
- if 1, do not reload the segment registers in the 32bit entry point.
Assume that %cs %ds %ss %es are all set to flat segments with
a base of 0 (or the equivalent for their environment).
Bit 7 (write): CAN_USE_HEAP
Set this bit to 1 to indicate that the value entered in the
heap_end_ptr is valid. If this field is clear, some setup code
......@@ -480,6 +489,29 @@ Protocol: 2.06+
cmdline_size characters. With protocol version 2.05 and earlier, the
maximum size was 255.
Field name: hardware_subarch
Type: write
Offset/size: 0x23c/4
Protocol: 2.07+
In a paravirtualized environment the hardware low level architectural
pieces such as interrupt handling, page table handling, and
accessing process control registers needs to be done differently.
This field allows the bootloader to inform the kernel we are in one
one of those environments.
0x00000000 The default x86/PC environment
0x00000001 lguest
0x00000002 Xen
Field name: hardware_subarch_data
Type: write
Offset/size: 0x240/8
Protocol: 2.07+
A pointer to data that is specific to hardware subarch
**** THE KERNEL COMMAND LINE
......
......@@ -15,6 +15,7 @@
#include <asm/fixmap.h>
#include <asm/processor.h>
#include <asm/thread_info.h>
#include <asm/bootparam.h>
#include <asm/elf.h>
#include <xen/interface/xen.h>
......@@ -146,4 +147,10 @@ void foo(void)
OFFSET(LGUEST_PAGES_regs_errcode, lguest_pages, regs.errcode);
OFFSET(LGUEST_PAGES_regs, lguest_pages, regs);
#endif
BLANK();
OFFSET(BP_scratch, boot_params, scratch);
OFFSET(BP_loadflags, boot_params, hdr.loadflags);
OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
OFFSET(BP_version, boot_params, hdr.version);
}
......@@ -28,8 +28,9 @@ struct setup_header {
u16 kernel_version;
u8 type_of_loader;
u8 loadflags;
#define LOADED_HIGH 0x01
#define CAN_USE_HEAP 0x80
#define LOADED_HIGH (1<<0)
#define KEEP_SEGMENTS (1<<6)
#define CAN_USE_HEAP (1<<7)
u16 setup_move_size;
u32 code32_start;
u32 ramdisk_image;
......@@ -41,6 +42,10 @@ struct setup_header {
u32 initrd_addr_max;
u32 kernel_alignment;
u8 relocatable_kernel;
u8 _pad2[3];
u32 cmdline_size;
u32 hardware_subarch;
u64 hardware_subarch_data;
} __attribute__((packed));
struct sys_desc_table {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册