提交 e24dcbef 编写于 作者: T Tejun Heo

shpchp: update workqueue usage

* Rename shpchp_wq to shpchp_ordered_wq and add non-ordered shpchp_wq
  which is used instead of the system workqueue.  This is to remove
  the use of flush_scheduled_work() which is deprecated and scheduled
  for removal.

* With cmwq in place, there's no point in creating workqueues lazily.
  Create both shpchp_wq and shpchp_ordered_wq upfront.

* Include workqueue.h from shpchp.h.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
上级 a827ea30
......@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/sched.h> /* signal_pending(), struct timer_list */
#include <linux/mutex.h>
#include <linux/workqueue.h>
#if !defined(MODULE)
#define MY_NAME "shpchp"
......@@ -46,6 +47,7 @@ extern int shpchp_poll_mode;
extern int shpchp_poll_time;
extern int shpchp_debug;
extern struct workqueue_struct *shpchp_wq;
extern struct workqueue_struct *shpchp_ordered_wq;
#define dbg(format, arg...) \
do { \
......
......@@ -33,7 +33,6 @@
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include "shpchp.h"
/* Global variables */
......@@ -41,6 +40,7 @@ int shpchp_debug;
int shpchp_poll_mode;
int shpchp_poll_time;
struct workqueue_struct *shpchp_wq;
struct workqueue_struct *shpchp_ordered_wq;
#define DRIVER_VERSION "0.4"
#define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>"
......@@ -174,8 +174,8 @@ void cleanup_slots(struct controller *ctrl)
slot = list_entry(tmp, struct slot, slot_list);
list_del(&slot->slot_list);
cancel_delayed_work(&slot->work);
flush_scheduled_work();
flush_workqueue(shpchp_wq);
flush_workqueue(shpchp_ordered_wq);
pci_hp_deregister(slot->hotplug_slot);
}
}
......@@ -360,9 +360,23 @@ static int __init shpcd_init(void)
{
int retval = 0;
shpchp_wq = alloc_ordered_workqueue("shpchp", 0);
if (!shpchp_wq)
return -ENOMEM;
shpchp_ordered_wq = alloc_ordered_workqueue("shpchp_ordered", 0);
if (!shpchp_ordered_wq) {
destroy_workqueue(shpchp_wq);
return -ENOMEM;
}
retval = pci_register_driver(&shpc_driver);
dbg("%s: pci_register_driver = %d\n", __func__, retval);
info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
if (retval) {
destroy_workqueue(shpchp_ordered_wq);
destroy_workqueue(shpchp_wq);
}
return retval;
}
......@@ -370,6 +384,8 @@ static void __exit shpcd_cleanup(void)
{
dbg("unload_shpchpd()\n");
pci_unregister_driver(&shpc_driver);
destroy_workqueue(shpchp_ordered_wq);
destroy_workqueue(shpchp_wq);
info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n");
}
......
......@@ -32,7 +32,6 @@
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include "../pci.h"
#include "shpchp.h"
......@@ -52,7 +51,7 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type)
info->p_slot = p_slot;
INIT_WORK(&info->work, interrupt_event_handler);
schedule_work(&info->work);
queue_work(shpchp_wq, &info->work);
return 0;
}
......@@ -457,7 +456,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work)
kfree(info);
goto out;
}
queue_work(shpchp_wq, &info->work);
queue_work(shpchp_ordered_wq, &info->work);
out:
mutex_unlock(&p_slot->lock);
}
......@@ -505,7 +504,7 @@ static void handle_button_press_event(struct slot *p_slot)
p_slot->hpc_ops->green_led_blink(p_slot);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
schedule_delayed_work(&p_slot->work, 5*HZ);
queue_delayed_work(shpchp_wq, &p_slot->work, 5*HZ);
break;
case BLINKINGOFF_STATE:
case BLINKINGON_STATE:
......
......@@ -179,8 +179,6 @@
#define SLOT_EVENT_LATCH 0x2
#define SLOT_SERR_INT_MASK 0x3
static atomic_t shpchp_num_controllers = ATOMIC_INIT(0);
static irqreturn_t shpc_isr(int irq, void *dev_id);
static void start_int_poll_timer(struct controller *ctrl, int sec);
static int hpc_check_cmd_status(struct controller *ctrl);
......@@ -614,13 +612,6 @@ static void hpc_release_ctlr(struct controller *ctrl)
iounmap(ctrl->creg);
release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
/*
* If this is the last controller to be released, destroy the
* shpchpd work queue
*/
if (atomic_dec_and_test(&shpchp_num_controllers))
destroy_workqueue(shpchp_wq);
}
static int hpc_power_on_slot(struct slot * slot)
......@@ -1077,9 +1068,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
MY_NAME, (void *)ctrl);
ctrl_dbg(ctrl, "request_irq %d for hpc%d (returns %d)\n",
ctrl->pci_dev->irq,
atomic_read(&shpchp_num_controllers), rc);
ctrl_dbg(ctrl, "request_irq %d (returns %d)\n",
ctrl->pci_dev->irq, rc);
if (rc) {
ctrl_err(ctrl, "Can't get irq %d for the hotplug "
"controller\n", ctrl->pci_dev->irq);
......@@ -1091,18 +1081,6 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
shpc_get_max_bus_speed(ctrl);
shpc_get_cur_bus_speed(ctrl);
/*
* If this is the first controller to be initialized,
* initialize the shpchpd work queue
*/
if (atomic_add_return(1, &shpchp_num_controllers) == 1) {
shpchp_wq = create_singlethread_workqueue("shpchpd");
if (!shpchp_wq) {
rc = -ENOMEM;
goto abort_iounmap;
}
}
/*
* Unmask all event interrupts of all slots
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册