Blackfin arch: use HI/LO macros rather than masking the bit ranges ourselves

Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

arch/blackfin/mach-bf533/head.S

@@ -144,8 +144,8 @@ ENTRY(__start)
 	ssync;
 
 	/* Turn off the icache */
-	p0.l = (IMEM_CONTROL & 0xFFFF);
-	p0.h = (IMEM_CONTROL >> 16);
+	p0.l = LO(IMEM_CONTROL);
+	p0.h = HI(IMEM_CONTROL);
 	R1 = [p0];
 	R0 = ~ENICPLB;
 	R0 = R0 & R1;
@@ -162,8 +162,8 @@ ENTRY(__start)
 #endif
 
 	/* Turn off the dcache */
-	p0.l = (DMEM_CONTROL & 0xFFFF);
-	p0.h = (DMEM_CONTROL >> 16);
+	p0.l = LO(DMEM_CONTROL);
+	p0.h = HI(DMEM_CONTROL);
 	R1 = [p0];
 	R0 = ~ENDCPLB;
 	R0 = R0 & R1;
@@ -417,8 +417,8 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = (EBIU_SDBCTL & 0xFFFF);
-	p0.h = (EBIU_SDBCTL >> 16);     /* SDRAM Memory Bank Control Register */
+	p0.l = LO(EBIU_SDBCTL);
+	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
 	r0 = mem_SDBCTL;
 	w[p0] = r0.l;
 	ssync;

arch/blackfin/mach-bf537/head.S

@@ -100,8 +100,8 @@ ENTRY(__start)
 	R0 = R1;
 
 	/* Turn off the icache */
-	p0.l = (IMEM_CONTROL & 0xFFFF);
-	p0.h = (IMEM_CONTROL >> 16);
+	p0.l = LO(IMEM_CONTROL);
+	p0.h = HI(IMEM_CONTROL);
 	R1 = [p0];
 	R0 = ~ENICPLB;
 	R0 = R0 & R1;
@@ -118,8 +118,8 @@ ENTRY(__start)
 #endif
 
 	/* Turn off the dcache */
-	p0.l = (DMEM_CONTROL & 0xFFFF);
-	p0.h = (DMEM_CONTROL >> 16);
+	p0.l = LO(DMEM_CONTROL);
+	p0.h = HI(DMEM_CONTROL);
 	R1 = [p0];
 	R0 = ~ENDCPLB;
 	R0 = R0 & R1;
@@ -436,8 +436,8 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = (EBIU_SDBCTL & 0xFFFF);
-	p0.h = (EBIU_SDBCTL >> 16);     /* SDRAM Memory Bank Control Register */
+	p0.l = LO(EBIU_SDBCTL);
+	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
 	r0 = mem_SDBCTL;
 	w[p0] = r0.l;
 	ssync;

arch/blackfin/mach-bf548/head.S

@@ -97,8 +97,8 @@ ENTRY(__stext)
 	R0 = R1;
 
 	/* Turn off the icache */
-	p0.l = (IMEM_CONTROL & 0xFFFF);
-	p0.h = (IMEM_CONTROL >> 16);
+	p0.l = LO(IMEM_CONTROL);
+	p0.h = HI(IMEM_CONTROL);
 	R1 = [p0];
 	R0 = ~ENICPLB;
 	R0 = R0 & R1;
@@ -106,8 +106,8 @@ ENTRY(__stext)
 	SSYNC;
 
 	/* Turn off the dcache */
-	p0.l = (DMEM_CONTROL & 0xFFFF);
-	p0.h = (DMEM_CONTROL >> 16);
+	p0.l = LO(DMEM_CONTROL);
+	p0.h = HI(DMEM_CONTROL);
 	R1 = [p0];
 	R0 = ~ENDCPLB;
 	R0 = R0 & R1;
@@ -335,8 +335,8 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = (EBIU_SDBCTL & 0xFFFF);
-	p0.h = (EBIU_SDBCTL >> 16);     /* SDRAM Memory Bank Control Register */
+	p0.l = LO(EBIU_SDBCTL);
+	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
 	r0 = mem_SDBCTL;
 	w[p0] = r0.l;
 	ssync;

arch/blackfin/mach-bf561/head.S

@@ -100,8 +100,8 @@ ENTRY(__start)
 	R0 = R1;
 
 	/* Turn off the icache */
-	p0.l = (IMEM_CONTROL & 0xFFFF);
-	p0.h = (IMEM_CONTROL >> 16);
+	p0.l = LO(IMEM_CONTROL);
+	p0.h = HI(IMEM_CONTROL);
 	R1 = [p0];
 	R0 = ~ENICPLB;
 	R0 = R0 & R1;
@@ -117,8 +117,8 @@ ENTRY(__start)
 #endif
 
 	/* Turn off the dcache */
-	p0.l = (DMEM_CONTROL & 0xFFFF);
-	p0.h = (DMEM_CONTROL >> 16);
+	p0.l = LO(DMEM_CONTROL);
+	p0.h = HI(DMEM_CONTROL);
 	R1 = [p0];
 	R0 = ~ENDCPLB;
 	R0 = R0 & R1;
@@ -371,8 +371,8 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = (EBIU_SDBCTL & 0xFFFF);
-	p0.h = (EBIU_SDBCTL >> 16);     /* SDRAM Memory Bank Control Register */
+	p0.l = LO(EBIU_SDBCTL);
+	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
 	r0 = mem_SDBCTL;
 	w[p0] = r0.l;
 	ssync;

arch/blackfin/mach-common/cache.S

@@ -79,8 +79,8 @@ ENTRY(_icache_invalidate)
 ENTRY(_invalidate_entire_icache)
 	[--SP] = ( R7:5);
 
-	P0.L = (IMEM_CONTROL & 0xFFFF);
-	P0.H = (IMEM_CONTROL >> 16);
+	P0.L = LO(IMEM_CONTROL);
+	P0.H = HI(IMEM_CONTROL);
 	R7 = [P0];
 
 	/* Clear the IMC bit , All valid bits in the instruction
@@ -197,8 +197,8 @@ ENTRY(_invalidate_entire_dcache)
 ENTRY(_dcache_invalidate)
 	[--SP] = ( R7:6);
 
-	P0.L = (DMEM_CONTROL & 0xFFFF);
-	P0.H = (DMEM_CONTROL >> 16);
+	P0.L = LO(DMEM_CONTROL);
+	P0.H = HI(DMEM_CONTROL);
 	R7 = [P0];
 
 	/* Clear the DMC[1:0] bits, All valid bits in the data

arch/blackfin/mach-common/cacheinit.S

@@ -43,8 +43,8 @@
 ENTRY(_bfin_write_IMEM_CONTROL)
 
 	/* Enable Instruction Cache */
-	P0.l = (IMEM_CONTROL & 0xFFFF);
-	P0.h = (IMEM_CONTROL >> 16);
+	P0.l = LO(IMEM_CONTROL);
+	P0.h = HI(IMEM_CONTROL);
 
 	/* Anomaly 05000125 */
 	CLI R1;

arch/blackfin/mach-common/cplbmgr.S

@@ -75,15 +75,15 @@ ENTRY(_cplb_mgr)
 	* from the configuration table.
  	*/
 
-	P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
-	P4.H = (ICPLB_FAULT_ADDR >> 16);
+	P4.L = LO(ICPLB_FAULT_ADDR);
+	P4.H = HI(ICPLB_FAULT_ADDR);
 
 	P1 = 16;
 	P5.L = _page_size_table;
 	P5.H = _page_size_table;
 
-	P0.L = (ICPLB_DATA0 & 0xFFFF);
-	P0.H = (ICPLB_DATA0 >> 16);
+	P0.L = LO(ICPLB_DATA0);
+	P0.H = HI(ICPLB_DATA0);
 	R4 = [P4];		/* Get faulting address*/
 	R6 = 64;		/* Advance past the fault address, which*/
 	R6 = R6 + R4;		/* we'll use if we find a match*/
@@ -117,13 +117,13 @@ ENTRY(_cplb_mgr)
 	I0 = R4;		/* Fault address we'll search for*/
 
 	/* set up pointers */
-	P0.L = (ICPLB_DATA0 & 0xFFFF);
-	P0.H = (ICPLB_DATA0 >> 16);
+	P0.L = LO(ICPLB_DATA0);
+	P0.H = HI(ICPLB_DATA0);
 
 	/* The replacement procedure for ICPLBs */
 
-	P4.L = (IMEM_CONTROL & 0xFFFF);
-	P4.H = (IMEM_CONTROL >> 16);
+	P4.L = LO(IMEM_CONTROL);
+	P4.H = HI(IMEM_CONTROL);
 
 	/* disable cplbs */
 	R5 = [P4];		/* Control Register*/
@@ -243,8 +243,8 @@ ENTRY(_cplb_mgr)
 	 * last entry of the table.
 	 */
 
-	P1.L = (ICPLB_DATA15 & 0xFFFF);		/* ICPLB_DATA15 */
-	P1.H = (ICPLB_DATA15 >> 16);
+	P1.L = LO(ICPLB_DATA15);		/* ICPLB_DATA15 */
+	P1.H = HI(ICPLB_DATA15);
 	[P1] = R2;
 	[P1-0x100] = R4;
 #ifdef	CONFIG_CPLB_INFO
@@ -292,10 +292,10 @@ ENTRY(_cplb_mgr)
 	 * pending writes associated with the CPLB.
 	 */
 
-	P4.L = (DCPLB_STATUS & 0xFFFF);
-	P4.H = (DCPLB_STATUS >> 16);
-	P3.L = (DCPLB_DATA0 & 0xFFFF);
-	P3.H = (DCPLB_DATA0 >> 16);
+	P4.L = LO(DCPLB_STATUS);
+	P4.H = HI(DCPLB_STATUS);
+	P3.L = LO(DCPLB_DATA0);
+	P3.H = HI(DCPLB_DATA0);
 	R5 = [P4];
 
 	/* A protection violation can be caused by more than just writes
@@ -355,11 +355,11 @@ ENTRY(_cplb_mgr)
 	 * config table, that covers the faulting address.
 	 */
 
-	P1.L = (DCPLB_DATA15 & 0xFFFF);
-	P1.H = (DCPLB_DATA15 >> 16);
+	P1.L = LO(DCPLB_DATA15);
+	P1.H = HI(DCPLB_DATA15);
 
-	P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
-	P4.H = (DCPLB_FAULT_ADDR >> 16);
+	P4.L = LO(DCPLB_FAULT_ADDR);
+	P4.H = HI(DCPLB_FAULT_ADDR);
 	R4 = [P4];
 	I0 = R4;
 
@@ -368,8 +368,8 @@ ENTRY(_cplb_mgr)
 	R6 = R1;	/* Save for later*/
 
 	/* Turn off CPLBs while we work.*/
-	P4.L = (DMEM_CONTROL & 0xFFFF);
-	P4.H = (DMEM_CONTROL >> 16);
+	P4.L = LO(DMEM_CONTROL);
+	P4.H = HI(DMEM_CONTROL);
 	R5 = [P4];
 	BITCLR(R5,ENDCPLB_P);
 	CLI R0;
@@ -384,8 +384,8 @@ ENTRY(_cplb_mgr)
 	 * are no good.
 	 */
 
-	I1.L = (DCPLB_DATA0 & 0xFFFF);
-	I1.H = (DCPLB_DATA0 >> 16);
+	I1.L = LO(DCPLB_DATA0);
+	I1.H = HI(DCPLB_DATA0);
 	P1 = 2;
 	P2 = 16;
 	I2.L = _dcplb_preference;
@@ -475,8 +475,8 @@ ENTRY(_cplb_mgr)
 	 * one space closer to the start.
 	 */
 
-	R1.L = (DCPLB_DATA16 & 0xFFFF);		/* DCPLB_DATA15 + 4 */
-	R1.H = (DCPLB_DATA16 >> 16);
+	R1.L = LO(DCPLB_DATA16);		/* DCPLB_DATA15 + 4 */
+	R1.H = HI(DCPLB_DATA16);
 	R0 = P0;
 
 	/* If the victim happens to be in DCPLB15,
@@ -549,8 +549,8 @@ ENTRY(_cplb_mgr)
 	 * if necessary.
 	 */
 
-	P1.L = (DCPLB_DATA15 & 0xFFFF);
-	P1.H = (DCPLB_DATA15 >> 16);
+	P1.L = LO(DCPLB_DATA15);
+	P1.H = HI(DCPLB_DATA15);
 
 	/* If the DCPLB has cache bits set, but caching hasn't
 	 * been enabled, then we want to mask off the cache-in-L1

arch/blackfin/mach-common/dpmc.S

@@ -39,8 +39,8 @@ ENTRY(_unmask_wdog_wakeup_evt)
 	P0.H = hi(SICA_IWR1);
 	P0.L = lo(SICA_IWR1);
 #else
-	P0.h = (SIC_IWR >> 16);
-	P0.l = (SIC_IWR & 0xFFFF);
+	P0.h = HI(SIC_IWR);
+	P0.l = LO(SIC_IWR);
 #endif
 	R7 = [P0];
 #if defined(CONFIG_BF561)
@@ -60,11 +60,11 @@ ENTRY(_unmask_wdog_wakeup_evt)
 	 */
 	R7 = 0x0000(z);
 #if defined(CONFIG_BF561)
-	P0.h = (WDOGA_STAT >> 16);
-	P0.l = (WDOGA_STAT & 0xFFFF);
+	P0.h = HI(WDOGA_STAT);
+	P0.l = LO(WDOGA_STAT);
 #else
-	P0.h = (WDOG_STAT >> 16);
-	P0.l = (WDOG_STAT & 0xFFFF);
+	P0.h = HI(WDOG_STAT);
+	P0.l = LO(WDOG_STAT);
 #endif
 	[P0] = R7;
 	SSYNC;
@@ -73,21 +73,21 @@ ENTRY(_unmask_wdog_wakeup_evt)
 ENTRY(_program_wdog_timer)
 	[--SP] = ( R7:0, P5:0 );
 #if defined(CONFIG_BF561)
-	P0.h = (WDOGA_CNT >> 16);
-	P0.l = (WDOGA_CNT & 0xFFFF);
+	P0.h = HI(WDOGA_CNT);
+	P0.l = LO(WDOGA_CNT);
 #else
-	P0.h = (WDOG_CNT >> 16);
-	P0.l = (WDOG_CNT & 0xFFFF);
+	P0.h = HI(WDOG_CNT);
+	P0.l = LO(WDOG_CNT);
 #endif
 	[P0] = R0;
 	SSYNC;
 
 #if defined(CONFIG_BF561)
-	P0.h = (WDOGA_CTL >> 16);
-	P0.l = (WDOGA_CTL & 0xFFFF);
+	P0.h = HI(WDOGA_CTL);
+	P0.l = LO(WDOGA_CTL);
 #else
-	P0.h = (WDOG_CTL >> 16);
-	P0.l = (WDOG_CTL & 0xFFFF);
+	P0.h = HI(WDOG_CTL);
+	P0.l = LO(WDOG_CTL);
 #endif
 	R7 = W[P0](Z);
 	CC = BITTST(R7,1);
@@ -97,11 +97,11 @@ ENTRY(_program_wdog_timer)
 
 .LSKIP_WRITE_TO_STAT:
 #if defined(CONFIG_BF561)
-	P0.h = (WDOGA_CTL >> 16);
-	    P0.l = (WDOGA_CTL & 0xFFFF);
+	P0.h = HI(WDOGA_CTL);
+	P0.l = LO(WDOGA_CTL);
 #else
-	P0.h = (WDOG_CTL >> 16);
-	    P0.l = (WDOG_CTL & 0xFFFF);
+	P0.h = HI(WDOG_CTL);
+	P0.l = LO(WDOG_CTL);
 #endif
 	R7 = W[P0](Z);
 	BITCLR(R7,1);   /* Enable GP event */
@@ -122,11 +122,11 @@ ENTRY(_clear_wdog_wakeup_evt)
 	[--SP] = ( R7:0, P5:0 );
 
 #if defined(CONFIG_BF561)
-	P0.h = (WDOGA_CTL >> 16);
-	P0.l = (WDOGA_CTL & 0xFFFF);
+	P0.h = HI(WDOGA_CTL);
+	P0.l = LO(WDOGA_CTL);
 #else
-	P0.h = (WDOG_CTL >> 16);
-	P0.l = (WDOG_CTL & 0xFFFF);
+	P0.h = HI(WDOG_CTL);
+	P0.l = LO(WDOG_CTL);
 #endif
 	R7 = 0x0AD6(Z);
 	W[P0] = R7.L;
@@ -149,11 +149,11 @@ ENTRY(_clear_wdog_wakeup_evt)
 ENTRY(_disable_wdog_timer)
 	[--SP] = ( R7:0, P5:0 );
 #if defined(CONFIG_BF561)
-	P0.h = (WDOGA_CTL >> 16);
-	P0.l = (WDOGA_CTL & 0xFFFF);
+	P0.h = HI(WDOGA_CTL);
+	P0.l = LO(WDOGA_CTL);
 #else
-	P0.h = (WDOG_CTL >> 16);
-	P0.l = (WDOG_CTL & 0xFFFF);
+	P0.h = HI(WDOG_CTL);
+	P0.l = LO(WDOG_CTL);
 #endif
 	R7 = 0xAD6(Z);
 	W[P0] = R7.L;

arch/blackfin/mach-common/lock.S

@@ -43,12 +43,12 @@ ENTRY(_cache_grab_lock)
 
 	[--SP]=( R7:0,P5:0 );
 
-	P1.H = (IMEM_CONTROL >> 16);
-	P1.L = (IMEM_CONTROL & 0xFFFF);
-	P5.H = (ICPLB_ADDR0 >> 16);
-	P5.L = (ICPLB_ADDR0 & 0xFFFF);
-	P4.H = (ICPLB_DATA0 >> 16);
-	P4.L = (ICPLB_DATA0 & 0xFFFF);
+	P1.H = HI(IMEM_CONTROL);
+	P1.L = LO(IMEM_CONTROL);
+	P5.H = HI(ICPLB_ADDR0);
+	P5.L = LO(ICPLB_ADDR0);
+	P4.H = HI(ICPLB_DATA0);
+	P4.L = LO(ICPLB_DATA0);
 	R7 = R0;
 
 	/* If the code of interest already resides in the cache
@@ -167,8 +167,8 @@ ENTRY(_cache_lock)
 
 	[--SP]=( R7:0,P5:0 );
 
-	P1.H = (IMEM_CONTROL >> 16);
-	P1.L = (IMEM_CONTROL & 0xFFFF);
+	P1.H = HI(IMEM_CONTROL);
+	P1.L = LO(IMEM_CONTROL);
 
 	/* Disable the Interrupts*/
 	CLI R3;
@@ -195,8 +195,8 @@ ENDPROC(_cache_lock)
  */
 
 ENTRY(_read_iloc)
-	P1.H = (IMEM_CONTROL >> 16);
-	P1.L = (IMEM_CONTROL & 0xFFFF);
+	P1.H = HI(IMEM_CONTROL);
+	P1.L = LO(IMEM_CONTROL);
 	R1 = 0xF;
 	R0 = [P1];
 	R0 = R0 >> 3;