提交 dd025c0c 编写于 作者: J Jiri Slaby 提交者: Linus Torvalds

Char: cyclades, dynamic ports

and save thus approx. 160k of .bss
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 f2462bfe
......@@ -722,11 +722,6 @@ module_param_array(irq, int, NULL, 0);
*/
static struct cyclades_card cy_card[NR_CARDS];
/* This is the per-channel data structure containing pointers, flags
and variables for the port. This driver supports a maximum of NR_PORTS.
*/
static struct cyclades_port cy_port[NR_PORTS];
static int cy_next_channel; /* next minor available */
/*
......@@ -855,13 +850,6 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
return 1;
}
if ((long)info < (long)(&cy_port[0]) ||
(long)(&cy_port[NR_PORTS]) < (long)info) {
printk(KERN_WARNING "cyc Warning: cyclades_port out of range "
"for (%s) in %s\n", name, routine);
return 1;
}
if (info->magic != CYCLADES_MAGIC) {
printk(KERN_WARNING "cyc Warning: bad magic number for serial "
"struct (%s) in %s\n", name, routine);
......@@ -1025,7 +1013,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip,
struct cyclades_port *info;
struct tty_struct *tty;
int char_count;
int i, j, len, mdm_change, mdm_status, outch;
int j, len, mdm_change, mdm_status, outch;
int save_xir, channel, save_car;
char data;
......@@ -1037,8 +1025,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip,
spin_lock(&cinfo->card_lock);
save_xir = (u_char) readb(base_addr + (CyRIR << index));
channel = (u_short) (save_xir & CyIRChannel);
i = channel + chip * 4 + cinfo->first_line;
info = &cy_port[i];
info = &cinfo->ports[channel + chip * 4];
save_car = readb(base_addr + (CyCAR << index));
cy_writeb(base_addr + (CyCAR << index), save_xir);
......@@ -1202,18 +1189,17 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip,
spin_lock(&cinfo->card_lock);
save_xir = (u_char) readb(base_addr + (CyTIR << index));
channel = (u_short) (save_xir & CyIRChannel);
i = channel + chip * 4 + cinfo->first_line;
save_car = readb(base_addr + (CyCAR << index));
cy_writeb(base_addr + (CyCAR << index), save_xir);
/* validate the port# (as configured and open) */
if ((i < 0) || (NR_PORTS <= i)) {
if (channel + chip * 4 >= cinfo->nports) {
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) &
~CyTxRdy);
goto txend;
}
info = &cy_port[i];
info = &cinfo->ports[channel + chip * 4];
if (info->tty == NULL) {
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) &
......@@ -1325,7 +1311,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip,
spin_lock(&cinfo->card_lock);
save_xir = (u_char) readb(base_addr + (CyMIR << index));
channel = (u_short) (save_xir & CyIRChannel);
info = &cy_port[channel + chip * 4 + cinfo->first_line];
info = &cinfo->ports[channel + chip * 4];
save_car = readb(base_addr + (CyCAR << index));
cy_writeb(base_addr + (CyCAR << index), save_xir);
......@@ -1726,7 +1712,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
special_count = 0;
delta_count = 0;
info = &cy_port[channel + cinfo->first_line];
info = &cinfo->ports[channel];
if ((tty = info->tty) == NULL)
continue;
......@@ -1896,7 +1882,7 @@ static void cyz_poll(unsigned long arg)
cyz_handle_cmd(cinfo);
for (port = 0; port < cinfo->nports; port++) {
info = &cy_port[port + cinfo->first_line];
info = &cinfo->ports[port];
tty = info->tty;
ch_ctrl = &(zfw_ctrl->ch_ctrl[port]);
buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
......@@ -2468,13 +2454,20 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
static int cy_open(struct tty_struct *tty, struct file *filp)
{
struct cyclades_port *info;
unsigned int i;
int retval, line;
line = tty->index;
if ((line < 0) || (NR_PORTS <= line)) {
return -ENODEV;
}
info = &cy_port[line];
for (i = 0; i < NR_CARDS; i++)
if (line < cy_card[i].first_line + cy_card[i].nports &&
line >= cy_card[i].first_line)
break;
if (i >= NR_CARDS)
return -ENODEV;
info = &cy_card[i].ports[line - cy_card[i].first_line];
if (info->line < 0) {
return -ENODEV;
}
......@@ -4437,7 +4430,7 @@ static void cy_hangup(struct tty_struct *tty)
* ---------------------------------------------------------------------
*/
static void __devinit cy_init_card(struct cyclades_card *cinfo)
static int __devinit cy_init_card(struct cyclades_card *cinfo)
{
struct cyclades_port *info;
u32 mailbox;
......@@ -4459,10 +4452,15 @@ static void __devinit cy_init_card(struct cyclades_card *cinfo)
nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips;
}
cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL);
if (cinfo->ports == NULL) {
printk(KERN_ERR "Cyclades: cannot allocate ports\n");
return -ENOMEM;
}
for (port = cinfo->first_line; port < cinfo->first_line + nports;
port++) {
info = &cy_port[port];
memset(info, 0, sizeof(*info));
info = &cinfo->ports[port - cinfo->first_line];
info->magic = CYCLADES_MAGIC;
info->card = cinfo;
info->line = port;
......@@ -4525,6 +4523,7 @@ static void __devinit cy_init_card(struct cyclades_card *cinfo)
#endif
}
#endif
return 0;
}
/* initialize chips on Cyclom-Y card -- return number of valid
......@@ -5094,13 +5093,11 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev)
pci_release_regions(pdev);
cinfo->base_addr = NULL;
for (i = cinfo->first_line; i < cinfo->first_line + cinfo->nports; i++){
cy_port[i].line = -1;
cy_port[i].magic = -1;
}
for (i = cinfo->first_line; i < cinfo->first_line +
cinfo->nports; i++)
tty_unregister_device(cy_serial_driver, i);
cinfo->nports = 0;
kfree(cinfo->ports);
}
static struct pci_driver cy_pci_driver = {
......@@ -5116,7 +5113,7 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
int *eof, void *data)
{
struct cyclades_port *info;
int i;
unsigned int i, j;
int len = 0;
off_t begin = 0;
off_t pos = 0;
......@@ -5130,33 +5127,34 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
len += size;
/* Output one line for each known port */
for (i = 0; i < NR_PORTS && cy_port[i].line >= 0; i++) {
info = &cy_port[i];
if (info->count)
size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu "
"%8lu %9lu %6ld\n", info->line,
(cur_jifs - info->idle_stats.in_use) / HZ,
info->idle_stats.xmit_bytes,
(cur_jifs - info->idle_stats.xmit_idle) / HZ,
info->idle_stats.recv_bytes,
(cur_jifs - info->idle_stats.recv_idle) / HZ,
info->idle_stats.overruns,
(long)info->tty->ldisc.num);
else
size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu "
"%8lu %9lu %6ld\n",
info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
len += size;
pos = begin + len;
if (pos < offset) {
len = 0;
begin = pos;
for (i = 0; i < NR_CARDS; i++)
for (j = 0; j < cy_card[i].nports; j++) {
info = &cy_card[i].ports[j];
if (info->count)
size = sprintf(buf + len, "%3d %8lu %10lu %8lu "
"%10lu %8lu %9lu %6ld\n", info->line,
(cur_jifs - info->idle_stats.in_use) /
HZ, info->idle_stats.xmit_bytes,
(cur_jifs - info->idle_stats.xmit_idle)/
HZ, info->idle_stats.recv_bytes,
(cur_jifs - info->idle_stats.recv_idle)/
HZ, info->idle_stats.overruns,
(long)info->tty->ldisc.num);
else
size = sprintf(buf + len, "%3d %8lu %10lu %8lu "
"%10lu %8lu %9lu %6ld\n",
info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
len += size;
pos = begin + len;
if (pos < offset) {
len = 0;
begin = pos;
}
if (pos > offset + length)
goto done;
}
if (pos > offset + length)
goto done;
}
*eof = 1;
done:
*start = buf + (offset - begin); /* Start of wanted data */
......@@ -5211,7 +5209,7 @@ static const struct tty_operations cy_ops = {
static int __init cy_init(void)
{
unsigned int i, nboards;
unsigned int nboards;
int retval = -ENOMEM;
cy_serial_driver = alloc_tty_driver(NR_PORTS);
......@@ -5242,11 +5240,6 @@ static int __init cy_init(void)
goto err_frtty;
}
for (i = 0; i < NR_PORTS; i++) {
cy_port[i].line = -1;
cy_port[i].magic = -1;
}
/* the code below is responsible to find the boards. Each different
type of board has its own detection routine. If a board is found,
the next cy_card structure available is set by the detection
......@@ -5275,6 +5268,7 @@ static int __init cy_init(void)
static void __exit cy_cleanup_module(void)
{
struct cyclades_card *card;
int i, e1;
#ifndef CONFIG_CYZ_INTR
......@@ -5290,22 +5284,24 @@ static void __exit cy_cleanup_module(void)
#endif
for (i = 0; i < NR_CARDS; i++) {
if (cy_card[i].base_addr) {
card = &cy_card[i];
if (card->base_addr) {
/* clear interrupt */
cy_writeb(cy_card[i].base_addr + Cy_ClrIntr, 0);
iounmap(cy_card[i].base_addr);
if (cy_card[i].ctl_addr)
iounmap(cy_card[i].ctl_addr);
if (cy_card[i].irq
cy_writeb(card->base_addr + Cy_ClrIntr, 0);
iounmap(card->base_addr);
if (card->ctl_addr)
iounmap(card->ctl_addr);
if (card->irq
#ifndef CONFIG_CYZ_INTR
&& !IS_CYC_Z(cy_card[i])
&& !IS_CYC_Z(*card)
#endif /* CONFIG_CYZ_INTR */
)
free_irq(cy_card[i].irq, &cy_card[i]);
for (e1 = cy_card[i].first_line;
e1 < cy_card[i].first_line +
cy_card[i].nports; e1++)
free_irq(card->irq, card);
for (e1 = card->first_line;
e1 < card->first_line +
card->nports; e1++)
tty_unregister_device(cy_serial_driver, e1);
kfree(card->ports);
}
}
......
......@@ -518,6 +518,7 @@ struct cyclades_card {
int bus_index; /* address shift - 0 for ISA, 1 for PCI */
int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */
spinlock_t card_lock;
struct cyclades_port *ports;
};
/***************************************
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册