提交 dba63b2f 编写于 作者: A Alan Stern 提交者: Greg Kroah-Hartman

USB: EHCI: fix build error in ehci-mxc

This patch (as1643b) fixes a build error in ehci-hcd when compiling for
ARM with allmodconfig:

drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition
drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver' defined but not used [-Wunused-variable]
drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition

The fix is to convert ehci-mxc over to the new "ehci-hcd is a library"
scheme so that it can coexist peacefully with the ehci-platform
driver.  As part of the conversion the ehci_mxc_priv data structure,
which was allocated dynamically, is now placed where it belongs: in
the private area at the end of struct ehci_hcd.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 9debc179
......@@ -148,7 +148,7 @@ config USB_EHCI_FSL
Variation of ARC USB block used in some Freescale chips.
config USB_EHCI_MXC
bool "Support for Freescale i.MX on-chip EHCI USB controller"
tristate "Support for Freescale i.MX on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_MXC
select USB_EHCI_ROOT_HUB_TT
---help---
......
......@@ -26,6 +26,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
......
......@@ -1246,11 +1246,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_fsl_driver
#endif
#ifdef CONFIG_USB_EHCI_MXC
#include "ehci-mxc.c"
#define PLATFORM_DRIVER ehci_mxc_driver
#endif
#ifdef CONFIG_USB_EHCI_SH
#include "ehci-sh.c"
#define PLATFORM_DRIVER ehci_hcd_sh_driver
......@@ -1349,6 +1344,7 @@ MODULE_LICENSE ("GPL");
#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
!defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
......
......@@ -17,75 +17,38 @@
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include <asm/mach-types.h>
#include "ehci.h"
#define DRIVER_DESC "Freescale On-Chip EHCI Host driver"
static const char hcd_name[] = "ehci-mxc";
#define ULPI_VIEWPORT_OFFSET 0x170
struct ehci_mxc_priv {
struct clk *usbclk, *ahbclk, *phyclk;
struct usb_hcd *hcd;
};
/* called during probe() after chip reset completes */
static int ehci_mxc_setup(struct usb_hcd *hcd)
{
hcd->has_tt = 1;
return ehci_setup(hcd);
}
static struct hc_driver __read_mostly ehci_mxc_hc_driver;
static const struct hc_driver ehci_mxc_hc_driver = {
.description = hcd_name,
.product_desc = "Freescale On-Chip EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_USB2 | HCD_MEMORY,
/*
* basic lifecycle operations
*/
.reset = ehci_mxc_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = {
.extra_priv_size = sizeof(struct ehci_mxc_priv),
};
static int ehci_mxc_drv_probe(struct platform_device *pdev)
......@@ -112,12 +75,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
if (!hcd)
return -ENOMEM;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
goto err_alloc;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "Found HC with no register addr. Check setup!\n");
......@@ -135,6 +92,10 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
goto err_alloc;
}
hcd->has_tt = 1;
ehci = hcd_to_ehci(hcd);
priv = (struct ehci_mxc_priv *) ehci->priv;
/* enable clocks */
priv->usbclk = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(priv->usbclk)) {
......@@ -169,8 +130,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
mdelay(10);
}
ehci = hcd_to_ehci(hcd);
/* EHCI registers start at offset 0x100 */
ehci->caps = hcd->regs + 0x100;
ehci->regs = hcd->regs + 0x100 +
......@@ -198,8 +157,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
}
}
priv->hcd = hcd;
platform_set_drvdata(pdev, priv);
platform_set_drvdata(pdev, hcd);
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
......@@ -244,8 +202,11 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
{
struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
struct ehci_mxc_priv *priv = platform_get_drvdata(pdev);
struct usb_hcd *hcd = priv->hcd;
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct ehci_mxc_priv *priv = (struct ehci_mxc_priv *) ehci->priv;
usb_remove_hcd(hcd);
if (pdata && pdata->exit)
pdata->exit(pdev);
......@@ -253,23 +214,20 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
if (pdata->otg)
usb_phy_shutdown(pdata->otg);
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
platform_set_drvdata(pdev, NULL);
clk_disable_unprepare(priv->usbclk);
clk_disable_unprepare(priv->ahbclk);
if (priv->phyclk)
clk_disable_unprepare(priv->phyclk);
usb_put_hcd(hcd);
platform_set_drvdata(pdev, NULL);
return 0;
}
static void ehci_mxc_drv_shutdown(struct platform_device *pdev)
{
struct ehci_mxc_priv *priv = platform_get_drvdata(pdev);
struct usb_hcd *hcd = priv->hcd;
struct usb_hcd *hcd = platform_get_drvdata(pdev);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
......@@ -279,9 +237,31 @@ MODULE_ALIAS("platform:mxc-ehci");
static struct platform_driver ehci_mxc_driver = {
.probe = ehci_mxc_drv_probe,
.remove = __exit_p(ehci_mxc_drv_remove),
.remove = ehci_mxc_drv_remove,
.shutdown = ehci_mxc_drv_shutdown,
.driver = {
.name = "mxc-ehci",
},
};
static int __init ehci_mxc_init(void)
{
if (usb_disabled())
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ehci_init_driver(&ehci_mxc_hc_driver, &ehci_mxc_overrides);
return platform_driver_register(&ehci_mxc_driver);
}
module_init(ehci_mxc_init);
static void __exit ehci_mxc_cleanup(void)
{
platform_driver_unregister(&ehci_mxc_driver);
}
module_exit(ehci_mxc_cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Sascha Hauer");
MODULE_LICENSE("GPL");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册