提交 d527eef5 编写于 作者: R Ralf Baechle

[MIPS] Sibyte: Finish conversion to modern time APIs.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 93c846f9
......@@ -69,8 +69,9 @@ void bcm1480_smp_init(void)
void bcm1480_smp_finish(void)
{
extern void bcm1480_time_init(void);
bcm1480_time_init();
extern void sb1480_clockevent_init(void);
sb1480_clockevent_init();
local_irq_enable();
}
......
......@@ -27,9 +27,8 @@
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/percpu.h>
#include <linux/spinlock.h>
#include <linux/kernel_stat.h>
#include <asm/irq.h>
#include <asm/addrspace.h>
......@@ -101,25 +100,36 @@ static void sibyte_set_mode(enum clock_event_mode mode,
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
case CLOCK_EVT_MODE_RESUME:
;
}
}
struct clock_event_device sibyte_hpt_clockevent = {
.name = "bcm1480-counter",
.features = CLOCK_EVT_FEAT_PERIODIC,
.set_mode = sibyte_set_mode,
.shift = 32,
.irq = 0,
};
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_init;
unsigned int cnt;
int res;
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
cnt = __raw_readq(timer_init);
cnt += delta;
__raw_writeq(cnt, timer_init);
res = ((long)(__raw_readq(timer_init) - cnt ) > 0) ? -ETIME : 0;
return res;
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
{
struct clock_event_device *cd = &sibyte_hpt_clockevent;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
/* Reset the timer */
__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
cd->event_handler(cd);
......@@ -140,24 +150,21 @@ static struct irqaction sibyte_counter_irqaction = {
* called directly from irq_handler.S when IP[4] is set during an
* interrupt
*/
static void __init sb1480_clockevent_init(void)
void __cpuinit sb1480_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
setup_irq(irq, &sibyte_counter_irqaction);
}
cd->name = "bcm1480-counter";
cd->features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_MODE_ONESHOT;
cd->set_next_event = sibyte_next_event;
cd->set_mode = sibyte_set_mode;
cd->irq = irq;
clockevent_set_clock(cd, BCM1480_HPT_VALUE);
void bcm1480_timer_interrupt(void)
{
int cpu = smp_processor_id();
int irq = K_BCM1480_INT_TIMER_0 + cpu;
/* Reset the timer */
__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
ll_timer_interrupt(irq);
setup_irq(irq, &sibyte_counter_irqaction);
}
static cycle_t bcm1480_hpt_read(void)
......@@ -168,9 +175,26 @@ static cycle_t bcm1480_hpt_read(void)
return (jiffies + 1) * (BCM1480_HPT_VALUE / HZ) - count;
}
struct clocksource bcm1480_clocksource = {
.name = "MIPS",
.rating = 200,
.read = bcm1480_hpt_read,
.mask = CLOCKSOURCE_MASK(32),
.shift = 32,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init sb1480_clocksource_init(void)
{
struct clocksource *cs = &bcm1480_clocksource;
clocksource_set_clock(cs, BCM1480_HPT_VALUE);
clocksource_register(cs);
}
void __init bcm1480_hpt_setup(void)
{
clocksource_mips.read = bcm1480_hpt_read;
mips_hpt_frequency = BCM1480_HPT_VALUE;
sb1480_clocksource_init();
sb1480_clockevent_init();
}
......@@ -400,43 +400,11 @@ static void sb1250_kgdb_interrupt(void)
#endif /* CONFIG_KGDB */
static inline void sb1250_timer_interrupt(void)
{
int cpu = smp_processor_id();
int irq = K_INT_TIMER_0 + cpu;
irq_enter();
kstat_this_cpu.irqs[irq]++;
write_seqlock(&xtime_lock);
/* ACK interrupt */
____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
/*
* call the generic timer interrupt handling
*/
do_timer(1);
write_sequnlock(&xtime_lock);
/*
* In UP mode, we call local_timer_interrupt() to do profiling
* and process accouting.
*
* In SMP mode, local_timer_interrupt() is invoked by appropriate
* low-level local timer interrupt handler.
*/
local_timer_interrupt(irq);
irq_exit();
}
extern void sb1250_mailbox_interrupt(void);
asmlinkage void plat_irq_dispatch(void)
{
unsigned int cpu = smp_processor_id();
unsigned int pending;
/*
......@@ -454,7 +422,7 @@ asmlinkage void plat_irq_dispatch(void)
if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
do_IRQ(MIPS_CPU_IRQ_BASE + 7);
else if (pending & CAUSEF_IP4)
sb1250_timer_interrupt();
do_IRQ(K_INT_TIMER_0 + cpu); /* sb1250_timer_interrupt() */
#ifdef CONFIG_SMP
else if (pending & CAUSEF_IP3)
......
......@@ -57,8 +57,9 @@ void sb1250_smp_init(void)
void sb1250_smp_finish(void)
{
extern void sb1250_time_init(void);
sb1250_time_init();
extern void sb1250_clockevent_init(void);
sb1250_clockevent_init();
local_irq_enable();
}
......
......@@ -100,6 +100,7 @@ static void sibyte_set_mode(enum clock_event_mode mode,
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
case CLOCK_EVT_MODE_RESUME:
;
}
}
......@@ -144,79 +145,7 @@ static struct irqaction sibyte_irqaction = {
.name = "timer",
};
/*
* The general purpose timer ticks at 1 Mhz independent if
* the rest of the system
*/
static void sibyte_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_cfg, *timer_init;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
__raw_writeq(0, timer_cfg);
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
timer_cfg);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Stop the timer until we actually program a shot */
case CLOCK_EVT_MODE_SHUTDOWN:
__raw_writeq(0, timer_cfg);
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
;
}
}
static int
sibyte_next_event(unsigned long delta, struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_cfg, *timer_init;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
__raw_writeq(0, timer_cfg);
__raw_writeq(delta, timer_init);
__raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg);
return 0;
}
struct clock_event_device sibyte_hpt_clockevent = {
.name = "sb1250-counter",
.features = CLOCK_EVT_FEAT_PERIODIC,
.set_mode = sibyte_set_mode,
.set_next_event = sibyte_next_event,
.shift = 32,
.irq = 0,
};
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
{
struct clock_event_device *cd = &sibyte_hpt_clockevent;
cd->event_handler(cd);
return IRQ_HANDLED;
}
static struct irqaction sibyte_irqaction = {
.handler = sibyte_counter_handler,
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "timer",
};
static void __init sb1250_clockevent_init(void)
void __cpuinit sb1250_clockevent_init(void)
{
struct clock_event_device *cd = &sibyte_hpt_clockevent;
unsigned int cpu = smp_processor_id();
......@@ -249,12 +178,6 @@ static void __init sb1250_clockevent_init(void)
clockevents_register_device(cd);
}
void __init plat_time_init(void)
{
sb1250_clocksource_init();
sb1250_clockevent_init();
}
/*
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
* again.
......@@ -267,3 +190,26 @@ static cycle_t sb1250_hpt_read(void)
return SB1250_HPT_VALUE - count;
}
struct clocksource bcm1250_clocksource = {
.name = "MIPS",
.rating = 200,
.read = sb1250_hpt_read,
.mask = CLOCKSOURCE_MASK(32),
.shift = 32,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init sb1250_clocksource_init(void)
{
struct clocksource *cs = &bcm1250_clocksource;
clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
clocksource_register(cs);
}
void __init plat_time_init(void)
{
sb1250_clocksource_init();
sb1250_clockevent_init();
}
......@@ -69,31 +69,6 @@ const char *get_system_type(void)
return "SiByte " SIBYTE_BOARD_NAME;
}
void __init plat_time_init(void)
{
#if defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
/* Setup HPT */
sb1250_hpt_setup();
#endif
}
void __init plat_timer_setup(struct irqaction *irq)
{
/*
* we don't set up irqaction, because we will deliver timer
* interrupts through low-level (direct) meachanism.
*/
/* We only need to setup the generic timer */
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
bcm1480_time_init();
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
sb1250_time_init();
#else
#error invalid SiByte board configuration
#endif
}
int swarm_be_handler(struct pt_regs *regs, int is_fixup)
{
if (!is_fixup && (regs->cp0_cause & 4)) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册