提交 d4b7de61 编写于 作者: T Thomas Gleixner 提交者: Matthew Garrett

platform-drivers: x86: pmic: Use irq_chip buslock mechanism

The set_type function of the pmic irq chip is a horrible hack. It
schedules work because it cannot access the scu chip from the set_type
function. That breaks the assumption, that the type is set after
set_type has returned.

irq_chips provide buslock functions to avoid the above. Convert the
driver to use the proper model.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Alek Du <alek.du@intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
上级 cb8e5e6a
......@@ -60,23 +60,18 @@ enum pmic_gpio_register {
#define GPOSW_DOU 0x08
#define GPOSW_RDRV 0x30
#define GPIO_UPDATE_TYPE 0x80000000
#define NUM_GPIO 24
struct pmic_gpio_irq {
spinlock_t lock;
u32 trigger[NUM_GPIO];
u32 dirty;
struct work_struct work;
};
struct pmic_gpio {
struct mutex buslock;
struct gpio_chip chip;
struct pmic_gpio_irq irqtypes;
void *gpiointr;
int irq;
unsigned irq_base;
unsigned int update_type;
u32 trigger_type;
};
static void pmic_program_irqtype(int gpio, int type)
......@@ -92,37 +87,6 @@ static void pmic_program_irqtype(int gpio, int type)
intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
};
static void pmic_irqtype_work(struct work_struct *work)
{
struct pmic_gpio_irq *t =
container_of(work, struct pmic_gpio_irq, work);
unsigned long flags;
int i;
u16 type;
spin_lock_irqsave(&t->lock, flags);
/* As we drop the lock, we may need multiple scans if we race the
pmic_irq_type function */
while (t->dirty) {
/*
* For each pin that has the dirty bit set send an IPC
* message to configure the hardware via the PMIC
*/
for (i = 0; i < NUM_GPIO; i++) {
if (!(t->dirty & (1 << i)))
continue;
t->dirty &= ~(1 << i);
/* We can't trust the array entry or dirty
once the lock is dropped */
type = t->trigger[i];
spin_unlock_irqrestore(&t->lock, flags);
pmic_program_irqtype(i, type);
spin_lock_irqsave(&t->lock, flags);
}
}
spin_unlock_irqrestore(&t->lock, flags);
}
static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
if (offset > 8) {
......@@ -190,20 +154,21 @@ static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
1 << (offset - 16));
}
/*
* This is called from genirq with pg->buslock locked and
* irq_desc->lock held. We can not access the scu bus here, so we
* store the change and update in the bus_sync_unlock() function below
*/
static int pmic_irq_type(struct irq_data *data, unsigned type)
{
struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
u32 gpio = data->irq - pg->irq_base;
unsigned long flags;
if (gpio >= pg->chip.ngpio)
return -EINVAL;
spin_lock_irqsave(&pg->irqtypes.lock, flags);
pg->irqtypes.trigger[gpio] = type;
pg->irqtypes.dirty |= (1 << gpio);
spin_unlock_irqrestore(&pg->irqtypes.lock, flags);
schedule_work(&pg->irqtypes.work);
pg->trigger_type = type;
pg->update_type = gpio | GPIO_UPDATE_TYPE;
return 0;
}
......@@ -214,6 +179,26 @@ static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
return pg->irq_base + offset;
}
static void pmic_bus_lock(struct irq_data *data)
{
struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
mutex_lock(&pg->buslock);
}
static void pmic_bus_sync_unlock(struct irq_data *data)
{
struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
if (pg->update_type) {
unsigned int gpio = pg->update_type & ~GPIO_UPDATE_TYPE;
pmic_program_irqtype(gpio, pg->trigger_type);
pg->update_type = 0;
}
mutex_unlock(&pg->buslock);
}
/* the gpiointr register is read-clear, so just do nothing. */
static void pmic_irq_unmask(struct irq_data *data) { }
......@@ -287,8 +272,7 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
pg->chip.can_sleep = 1;
pg->chip.dev = dev;
INIT_WORK(&pg->irqtypes.work, pmic_irqtype_work);
spin_lock_init(&pg->irqtypes.lock);
mutex_init(&pg->buslock);
pg->chip.dev = dev;
retval = gpiochip_add(&pg->chip);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册