powerpc/mpc83xx: Power Management support

Basic PM support for 83xx.  Standby is implemented as sleep.
Suspend-to-RAM is implemented as "deep sleep" (with the processor
turned off) on 831x.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

arch/powerpc/Kconfig

@@ -199,7 +199,7 @@ config ARCH_HIBERNATION_POSSIBLE
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
 
 config PPC_DCR_NATIVE
 	bool

arch/powerpc/platforms/83xx/Makefile

@@ -3,6 +3,7 @@
 #
 obj-y				:= misc.o usb.o
 obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o

arch/powerpc/platforms/83xx/suspend-asm.S

+/*
+ * Enter and leave deep sleep state on MPC83xx
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+
+#define SS_MEMSAVE	0x00 /* First 8 bytes of RAM */
+#define SS_HID		0x08 /* 3 HIDs */
+#define SS_IABR		0x14 /* 2 IABRs */
+#define SS_IBCR		0x1c
+#define SS_DABR		0x20 /* 2 DABRs */
+#define SS_DBCR		0x28
+#define SS_SP		0x2c
+#define SS_SR		0x30 /* 16 segment registers */
+#define SS_R2		0x70
+#define SS_MSR		0x74
+#define SS_SDR1		0x78
+#define SS_LR		0x7c
+#define SS_SPRG		0x80 /* 4 SPRGs */
+#define SS_DBAT		0x90 /* 8 DBATs */
+#define SS_IBAT		0xd0 /* 8 IBATs */
+#define SS_TB		0x110
+#define SS_CR		0x118
+#define SS_GPREG	0x11c /* r12-r31 */
+#define STATE_SAVE_SIZE 0x16c
+
+	.section .data
+	.align	5
+
+mpc83xx_sleep_save_area:
+	.space	STATE_SAVE_SIZE
+immrbase:
+	.long	0
+
+	.section .text
+	.align	5
+
+	/* r3 = physical address of IMMR */
+_GLOBAL(mpc83xx_enter_deep_sleep)
+	lis	r4, immrbase@ha
+	stw	r3, immrbase@l(r4)
+
+	/* The first 2 words of memory are used to communicate with the
+	 * bootloader, to tell it how to resume.
+	 *
+	 * The first word is the magic number 0xf5153ae5, and the second
+	 * is the pointer to mpc83xx_deep_resume.
+	 *
+	 * The original content of these two words is saved in SS_MEMSAVE.
+	 */
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+
+	lis	r4, KERNELBASE@h
+	lwz	r5, 0(r4)
+	lwz	r6, 4(r4)
+
+	stw	r5, SS_MEMSAVE+0(r3)
+	stw	r6, SS_MEMSAVE+4(r3)
+
+	mfspr	r5, SPRN_HID0
+	mfspr	r6, SPRN_HID1
+	mfspr	r7, SPRN_HID2
+
+	stw	r5, SS_HID+0(r3)
+	stw	r6, SS_HID+4(r3)
+	stw	r7, SS_HID+8(r3)
+
+	mfspr	r4, SPRN_IABR
+	mfspr	r5, SPRN_IABR2
+	mfspr	r6, SPRN_IBCR
+	mfspr	r7, SPRN_DABR
+	mfspr	r8, SPRN_DABR2
+	mfspr	r9, SPRN_DBCR
+
+	stw	r4, SS_IABR+0(r3)
+	stw	r5, SS_IABR+4(r3)
+	stw	r6, SS_IBCR(r3)
+	stw	r7, SS_DABR+0(r3)
+	stw	r8, SS_DABR+4(r3)
+	stw	r9, SS_DBCR(r3)
+
+	mfspr	r4, SPRN_SPRG0
+	mfspr	r5, SPRN_SPRG1
+	mfspr	r6, SPRN_SPRG2
+	mfspr	r7, SPRN_SPRG3
+	mfsdr1	r8
+
+	stw	r4, SS_SPRG+0(r3)
+	stw	r5, SS_SPRG+4(r3)
+	stw	r6, SS_SPRG+8(r3)
+	stw	r7, SS_SPRG+12(r3)
+	stw	r8, SS_SDR1(r3)
+
+	mfspr	r4, SPRN_DBAT0U
+	mfspr	r5, SPRN_DBAT0L
+	mfspr	r6, SPRN_DBAT1U
+	mfspr	r7, SPRN_DBAT1L
+
+	stw	r4, SS_DBAT+0x00(r3)
+	stw	r5, SS_DBAT+0x04(r3)
+	stw	r6, SS_DBAT+0x08(r3)
+	stw	r7, SS_DBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_DBAT2U
+	mfspr	r5, SPRN_DBAT2L
+	mfspr	r6, SPRN_DBAT3U
+	mfspr	r7, SPRN_DBAT3L
+
+	stw	r4, SS_DBAT+0x10(r3)
+	stw	r5, SS_DBAT+0x14(r3)
+	stw	r6, SS_DBAT+0x18(r3)
+	stw	r7, SS_DBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_DBAT4U
+	mfspr	r5, SPRN_DBAT4L
+	mfspr	r6, SPRN_DBAT5U
+	mfspr	r7, SPRN_DBAT5L
+
+	stw	r4, SS_DBAT+0x20(r3)
+	stw	r5, SS_DBAT+0x24(r3)
+	stw	r6, SS_DBAT+0x28(r3)
+	stw	r7, SS_DBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_DBAT6U
+	mfspr	r5, SPRN_DBAT6L
+	mfspr	r6, SPRN_DBAT7U
+	mfspr	r7, SPRN_DBAT7L
+
+	stw	r4, SS_DBAT+0x30(r3)
+	stw	r5, SS_DBAT+0x34(r3)
+	stw	r6, SS_DBAT+0x38(r3)
+	stw	r7, SS_DBAT+0x3c(r3)
+
+	mfspr	r4, SPRN_IBAT0U
+	mfspr	r5, SPRN_IBAT0L
+	mfspr	r6, SPRN_IBAT1U
+	mfspr	r7, SPRN_IBAT1L
+
+	stw	r4, SS_IBAT+0x00(r3)
+	stw	r5, SS_IBAT+0x04(r3)
+	stw	r6, SS_IBAT+0x08(r3)
+	stw	r7, SS_IBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_IBAT2U
+	mfspr	r5, SPRN_IBAT2L
+	mfspr	r6, SPRN_IBAT3U
+	mfspr	r7, SPRN_IBAT3L
+
+	stw	r4, SS_IBAT+0x10(r3)
+	stw	r5, SS_IBAT+0x14(r3)
+	stw	r6, SS_IBAT+0x18(r3)
+	stw	r7, SS_IBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_IBAT4U
+	mfspr	r5, SPRN_IBAT4L
+	mfspr	r6, SPRN_IBAT5U
+	mfspr	r7, SPRN_IBAT5L
+
+	stw	r4, SS_IBAT+0x20(r3)
+	stw	r5, SS_IBAT+0x24(r3)
+	stw	r6, SS_IBAT+0x28(r3)
+	stw	r7, SS_IBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_IBAT6U
+	mfspr	r5, SPRN_IBAT6L
+	mfspr	r6, SPRN_IBAT7U
+	mfspr	r7, SPRN_IBAT7L
+
+	stw	r4, SS_IBAT+0x30(r3)
+	stw	r5, SS_IBAT+0x34(r3)
+	stw	r6, SS_IBAT+0x38(r3)
+	stw	r7, SS_IBAT+0x3c(r3)
+
+	mfmsr	r4
+	mflr	r5
+	mfcr	r6
+
+	stw	r4, SS_MSR(r3)
+	stw	r5, SS_LR(r3)
+	stw	r6, SS_CR(r3)
+	stw	r1, SS_SP(r3)
+	stw	r2, SS_R2(r3)
+
+1:	mftbu	r4
+	mftb	r5
+	mftbu	r6
+	cmpw	r4, r6
+	bne	1b
+
+	stw	r4, SS_TB+0(r3)
+	stw	r5, SS_TB+4(r3)
+
+	stmw	r12, SS_GPREG(r3)
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	mfsrin	r5, r4
+	stwu	r5, 4(r6)
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	/* Disable machine checks and critical exceptions */
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~MSR_CE
+	rlwinm	r4, r4, 0, ~MSR_ME
+	mtmsr	r4
+	isync
+
+#define TMP_VIRT_IMMR		0xf0000000
+#define DEFAULT_IMMR_VALUE	0xff400000
+#define IMMRBAR_BASE		0x0000
+
+	lis	r4, immrbase@ha
+	lwz	r4, immrbase@l(r4)
+
+	/* Use DBAT0 to address the current IMMR space */
+
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT0L, r4
+	lis	r8, TMP_VIRT_IMMR@h
+	ori	r4, r8, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT0U, r4
+	isync
+
+	/* Use DBAT1 to address the original IMMR space */
+
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT1L, r4
+	lis	r9, (TMP_VIRT_IMMR + 0x01000000)@h
+	ori	r4, r9, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT1U, r4
+	isync
+
+	/* Use DBAT2 to address the beginning of RAM.  This isn't done
+	 * using the normal virtual mapping, because with page debugging
+	 * enabled it will be read-only.
+	 */
+
+	li	r4, 0x0002
+	mtspr	SPRN_DBAT2L, r4
+	lis	r4, KERNELBASE@h
+	ori	r4, r4, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT2U, r4
+	isync
+
+	/* Flush the cache with our BAT, as there will be TLB misses
+	 * otherwise if page debugging is enabled, and these misses
+	 * will disturb the PLRU algorithm.
+	 */
+
+	bl	__flush_disable_L1
+
+	/* Keep the i-cache enabled, so the hack below for low-boot
+	 * flash will work.
+	 */
+	mfspr	r3, SPRN_HID0
+	ori	r3, r3, HID0_ICE
+	mtspr	SPRN_HID0, r3
+	isync
+
+	lis	r6, 0xf515
+	ori	r6, r6, 0x3ae5
+
+	lis	r7, mpc83xx_deep_resume@h
+	ori	r7, r7, mpc83xx_deep_resume@l
+	tophys(r7, r7)
+
+	lis	r5, KERNELBASE@h
+	stw	r6, 0(r5)
+	stw	r7, 4(r5)
+
+	/* Reset BARs */
+
+	li	r4, 0
+	stw	r4, 0x0024(r8)
+	stw	r4, 0x002c(r8)
+	stw	r4, 0x0034(r8)
+	stw	r4, 0x003c(r8)
+	stw	r4, 0x0064(r8)
+	stw	r4, 0x006c(r8)
+
+	/* Rev 1 of the 8313 has problems with wakeup events that are
+	 * pending during the transition to deep sleep state (such as if
+	 * the PCI host sets the state to D3 and then D0 in rapid
+	 * succession).  This check shrinks the race window somewhat.
+	 *
+	 * See erratum PCI23, though the problem is not limited
+	 * to PCI.
+	 */
+
+	lwz	r3, 0x0b04(r8)
+	andi.	r3, r3, 1
+	bne-	mpc83xx_deep_resume
+
+	/* Move IMMR back to the default location, following the
+	 * procedure specified in the MPC8313 manual.
+	 */
+	lwz	r4, IMMRBAR_BASE(r8)
+	isync
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	stw	r4, IMMRBAR_BASE(r8)
+	lis	r4, KERNELBASE@h
+	lwz	r4, 0(r4)
+	isync
+	lwz	r4, IMMRBAR_BASE(r9)
+	mr	r8, r9
+	isync
+
+	/* Check the Reset Configuration Word to see whether flash needs
+	 * to be mapped at a low address or a high address.
+	 */
+
+	lwz	r4, 0x0904(r8)
+	andis.	r4, r4, 0x0400
+	li	r4, 0
+	beq	boot_low
+	lis	r4, 0xff80
+boot_low:
+	stw	r4, 0x0020(r8)
+	lis	r7, 0x8000
+	ori	r7, r7, 0x0016
+
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+	oris	r5, r5, HID0_SLEEP@h
+	mtspr	SPRN_HID0, r5
+	isync
+
+	mfmsr	r5
+	oris	r5, r5, MSR_POW@h
+
+	/* Enable the flash mapping at the appropriate address.  This
+	 * mapping will override the RAM mapping if booting low, so there's
+	 * no need to disable the latter.  This must be done inside the same
+	 * cache line as setting MSR_POW, so that no instruction fetches
+	 * from RAM happen after the flash mapping is turned on.
+	 */
+
+	.align	5
+	stw	r7, 0x0024(r8)
+	sync
+	isync
+	mtmsr	r5
+	isync
+1:	b	1b
+
+mpc83xx_deep_resume:
+	lis	r4, 1f@h
+	ori	r4, r4, 1f@l
+	tophys(r4, r4)
+	mtsrr0	r4
+
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~(MSR_IR | MSR_DR)
+	mtsrr1	r4
+
+	rfi
+
+1:	tlbia
+	bl	__inval_enable_L1
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+	tophys(r3, r3)
+
+	lwz	r5, SS_MEMSAVE+0(r3)
+	lwz	r6, SS_MEMSAVE+4(r3)
+
+	stw	r5, 0(0)
+	stw	r6, 4(0)
+
+	lwz	r5, SS_HID+0(r3)
+	lwz	r6, SS_HID+4(r3)
+	lwz	r7, SS_HID+8(r3)
+
+	mtspr	SPRN_HID0, r5
+	mtspr	SPRN_HID1, r6
+	mtspr	SPRN_HID2, r7
+
+	lwz	r4, SS_IABR+0(r3)
+	lwz	r5, SS_IABR+4(r3)
+	lwz	r6, SS_IBCR(r3)
+	lwz	r7, SS_DABR+0(r3)
+	lwz	r8, SS_DABR+4(r3)
+	lwz	r9, SS_DBCR(r3)
+
+	mtspr	SPRN_IABR, r4
+	mtspr	SPRN_IABR2, r5
+	mtspr	SPRN_IBCR, r6
+	mtspr	SPRN_DABR, r7
+	mtspr	SPRN_DABR2, r8
+	mtspr	SPRN_DBCR, r9
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	lwzu	r5, 4(r6)
+	mtsrin	r5, r4
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	lwz	r4, SS_DBAT+0x00(r3)
+	lwz	r5, SS_DBAT+0x04(r3)
+	lwz	r6, SS_DBAT+0x08(r3)
+	lwz	r7, SS_DBAT+0x0c(r3)
+
+	mtspr	SPRN_DBAT0U, r4
+	mtspr	SPRN_DBAT0L, r5
+	mtspr	SPRN_DBAT1U, r6
+	mtspr	SPRN_DBAT1L, r7
+
+	lwz	r4, SS_DBAT+0x10(r3)
+	lwz	r5, SS_DBAT+0x14(r3)
+	lwz	r6, SS_DBAT+0x18(r3)
+	lwz	r7, SS_DBAT+0x1c(r3)
+
+	mtspr	SPRN_DBAT2U, r4
+	mtspr	SPRN_DBAT2L, r5
+	mtspr	SPRN_DBAT3U, r6
+	mtspr	SPRN_DBAT3L, r7
+
+	lwz	r4, SS_DBAT+0x20(r3)
+	lwz	r5, SS_DBAT+0x24(r3)
+	lwz	r6, SS_DBAT+0x28(r3)
+	lwz	r7, SS_DBAT+0x2c(r3)
+
+	mtspr	SPRN_DBAT4U, r4
+	mtspr	SPRN_DBAT4L, r5
+	mtspr	SPRN_DBAT5U, r6
+	mtspr	SPRN_DBAT5L, r7
+
+	lwz	r4, SS_DBAT+0x30(r3)
+	lwz	r5, SS_DBAT+0x34(r3)
+	lwz	r6, SS_DBAT+0x38(r3)
+	lwz	r7, SS_DBAT+0x3c(r3)
+
+	mtspr	SPRN_DBAT6U, r4
+	mtspr	SPRN_DBAT6L, r5
+	mtspr	SPRN_DBAT7U, r6
+	mtspr	SPRN_DBAT7L, r7
+
+	lwz	r4, SS_IBAT+0x00(r3)
+	lwz	r5, SS_IBAT+0x04(r3)
+	lwz	r6, SS_IBAT+0x08(r3)
+	lwz	r7, SS_IBAT+0x0c(r3)
+
+	mtspr	SPRN_IBAT0U, r4
+	mtspr	SPRN_IBAT0L, r5
+	mtspr	SPRN_IBAT1U, r6
+	mtspr	SPRN_IBAT1L, r7
+
+	lwz	r4, SS_IBAT+0x10(r3)
+	lwz	r5, SS_IBAT+0x14(r3)
+	lwz	r6, SS_IBAT+0x18(r3)
+	lwz	r7, SS_IBAT+0x1c(r3)
+
+	mtspr	SPRN_IBAT2U, r4
+	mtspr	SPRN_IBAT2L, r5
+	mtspr	SPRN_IBAT3U, r6
+	mtspr	SPRN_IBAT3L, r7
+
+	lwz	r4, SS_IBAT+0x20(r3)
+	lwz	r5, SS_IBAT+0x24(r3)
+	lwz	r6, SS_IBAT+0x28(r3)
+	lwz	r7, SS_IBAT+0x2c(r3)
+
+	mtspr	SPRN_IBAT4U, r4
+	mtspr	SPRN_IBAT4L, r5
+	mtspr	SPRN_IBAT5U, r6
+	mtspr	SPRN_IBAT5L, r7
+
+	lwz	r4, SS_IBAT+0x30(r3)
+	lwz	r5, SS_IBAT+0x34(r3)
+	lwz	r6, SS_IBAT+0x38(r3)
+	lwz	r7, SS_IBAT+0x3c(r3)
+
+	mtspr	SPRN_IBAT6U, r4
+	mtspr	SPRN_IBAT6L, r5
+	mtspr	SPRN_IBAT7U, r6
+	mtspr	SPRN_IBAT7L, r7
+
+	lwz	r4, SS_SPRG+0(r3)
+	lwz	r5, SS_SPRG+4(r3)
+	lwz	r6, SS_SPRG+8(r3)
+	lwz	r7, SS_SPRG+12(r3)
+	lwz	r8, SS_SDR1(r3)
+
+	mtspr	SPRN_SPRG0, r4
+	mtspr	SPRN_SPRG1, r5
+	mtspr	SPRN_SPRG2, r6
+	mtspr	SPRN_SPRG3, r7
+	mtsdr1	r8
+
+	lwz	r4, SS_MSR(r3)
+	lwz	r5, SS_LR(r3)
+	lwz	r6, SS_CR(r3)
+	lwz	r1, SS_SP(r3)
+	lwz	r2, SS_R2(r3)
+
+	mtsrr1	r4
+	mtsrr0	r5
+	mtcr	r6
+
+	li	r4, 0
+	mtspr	SPRN_TBWL, r4
+
+	lwz	r4, SS_TB+0(r3)
+	lwz	r5, SS_TB+4(r3)
+
+	mtspr	SPRN_TBWU, r4
+	mtspr	SPRN_TBWL, r5
+
+	lmw	r12, SS_GPREG(r3)
+
+	/* Kick decrementer */
+	li	r0, 1
+	mtdec	r0
+
+	rfi

arch/powerpc/platforms/83xx/suspend.c

+/*
+ * MPC83xx suspend support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/suspend.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mpc6xx.h>
+
+#include <sysdev/fsl_soc.h>
+
+#define PMCCR1_NEXT_STATE       0x0C /* Next state for power management */
+#define PMCCR1_NEXT_STATE_SHIFT 2
+#define PMCCR1_CURR_STATE       0x03 /* Current state for power management*/
+#define IMMR_RCW_OFFSET         0x900
+#define RCW_PCI_HOST            0x80000000
+
+void mpc83xx_enter_deep_sleep(phys_addr_t immrbase);
+
+struct mpc83xx_pmc {
+	u32 config;
+#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */
+#define PMCCR_SLPEN 1 /* System low power enable */
+
+	u32 event;
+	u32 mask;
+/* All but PMCI are deep-sleep only */
+#define PMCER_GPIO   0x100
+#define PMCER_PCI    0x080
+#define PMCER_USB    0x040
+#define PMCER_ETSEC1 0x020
+#define PMCER_ETSEC2 0x010
+#define PMCER_TIMER  0x008
+#define PMCER_INT1   0x004
+#define PMCER_INT2   0x002
+#define PMCER_PMCI   0x001
+#define PMCER_ALL    0x1FF
+
+	/* deep-sleep only */
+	u32 config1;
+#define PMCCR1_USE_STATE  0x80000000
+#define PMCCR1_PME_EN     0x00000080
+#define PMCCR1_ASSERT_PME 0x00000040
+#define PMCCR1_POWER_OFF  0x00000020
+
+	/* deep-sleep only */
+	u32 config2;
+};
+
+struct mpc83xx_rcw {
+	u32 rcwlr;
+	u32 rcwhr;
+};
+
+struct mpc83xx_clock {
+	u32 spmr;
+	u32 occr;
+	u32 sccr;
+};
+
+struct pmc_type {
+	int has_deep_sleep;
+};
+
+static struct of_device *pmc_dev;
+static int has_deep_sleep, deep_sleeping;
+static int pmc_irq;
+static struct mpc83xx_pmc __iomem *pmc_regs;
+static struct mpc83xx_clock __iomem *clock_regs;
+static int is_pci_agent, wake_from_pci;
+static phys_addr_t immrbase;
+static int pci_pm_state;
+static DECLARE_WAIT_QUEUE_HEAD(agent_wq);
+
+int fsl_deep_sleep(void)
+{
+	return deep_sleeping;
+}
+
+static int mpc83xx_change_state(void)
+{
+	u32 curr_state;
+	u32 reg_cfg1 = in_be32(&pmc_regs->config1);
+
+	if (is_pci_agent) {
+		pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >>
+		               PMCCR1_NEXT_STATE_SHIFT;
+		curr_state = reg_cfg1 & PMCCR1_CURR_STATE;
+
+		if (curr_state != pci_pm_state) {
+			reg_cfg1 &= ~PMCCR1_CURR_STATE;
+			reg_cfg1 |= pci_pm_state;
+			out_be32(&pmc_regs->config1, reg_cfg1);
+
+			wake_up(&agent_wq);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
+{
+	u32 event = in_be32(&pmc_regs->event);
+	int ret = IRQ_NONE;
+
+	if (mpc83xx_change_state())
+		ret = IRQ_HANDLED;
+
+	if (event) {
+		out_be32(&pmc_regs->event, event);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int mpc83xx_suspend_enter(suspend_state_t state)
+{
+	int ret = -EAGAIN;
+
+	/* Don't go to sleep if there's a race where pci_pm_state changes
+	 * between the agent thread checking it and the PM code disabling
+	 * interrupts.
+	 */
+	if (wake_from_pci) {
+		if (pci_pm_state != (deep_sleeping ? 3 : 2))
+			goto out;
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_PME_EN);
+	}
+
+	/* Put the system into low-power mode and the RAM
+	 * into self-refresh mode once the core goes to
+	 * sleep.
+	 */
+
+	out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN);
+
+	/* If it has deep sleep (i.e. it's an 831x or compatible),
+	 * disable power to the core upon entering sleep mode.  This will
+	 * require going through the boot firmware upon a wakeup event.
+	 */
+
+	if (deep_sleeping) {
+		out_be32(&pmc_regs->mask, PMCER_ALL);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF);
+
+		enable_kernel_fp();
+
+		mpc83xx_enter_deep_sleep(immrbase);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
+
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+	} else {
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+		mpc6xx_enter_standby();
+	}
+
+	ret = 0;
+
+out:
+	out_be32(&pmc_regs->config1,
+	         in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN);
+
+	return ret;
+}
+
+static void mpc83xx_suspend_finish(void)
+{
+	deep_sleeping = 0;
+}
+
+static int mpc83xx_suspend_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM;
+}
+
+static int mpc83xx_suspend_begin(suspend_state_t state)
+{
+	switch (state) {
+		case PM_SUSPEND_STANDBY:
+			deep_sleeping = 0;
+			return 0;
+
+		case PM_SUSPEND_MEM:
+			if (has_deep_sleep)
+				deep_sleeping = 1;
+
+			return 0;
+
+		default:
+			return -EINVAL;
+	}
+}
+
+static int agent_thread_fn(void *data)
+{
+	while (1) {
+		wait_event_interruptible(agent_wq, pci_pm_state >= 2);
+		try_to_freeze();
+
+		if (signal_pending(current) || pci_pm_state < 2)
+			continue;
+
+		/* With a preemptible kernel (or SMP), this could race with
+		 * a userspace-driven suspend request.  It's probably best
+		 * to avoid mixing the two with such a configuration (or
+		 * else fix it by adding a mutex to state_store that we can
+		 * synchronize with).
+		 */
+
+		wake_from_pci = 1;
+
+		pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM :
+		                               PM_SUSPEND_STANDBY);
+
+		wake_from_pci = 0;
+	}
+
+	return 0;
+}
+
+static void mpc83xx_set_agent(void)
+{
+	out_be32(&pmc_regs->config1, PMCCR1_USE_STATE);
+	out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+	kthread_run(agent_thread_fn, NULL, "PCI power mgt");
+}
+
+static int mpc83xx_is_pci_agent(void)
+{
+	struct mpc83xx_rcw __iomem *rcw_regs;
+	int ret;
+
+	rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET,
+	                   sizeof(struct mpc83xx_rcw));
+
+	if (!rcw_regs)
+		return -ENOMEM;
+
+	ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST);
+
+	iounmap(rcw_regs);
+	return ret;
+}
+
+static struct platform_suspend_ops mpc83xx_suspend_ops = {
+	.valid = mpc83xx_suspend_valid,
+	.begin = mpc83xx_suspend_begin,
+	.enter = mpc83xx_suspend_enter,
+	.finish = mpc83xx_suspend_finish,
+};
+
+static int pmc_probe(struct of_device *ofdev,
+                     const struct of_device_id *match)
+{
+	struct device_node *np = ofdev->node;
+	struct resource res;
+	struct pmc_type *type = match->data;
+	int ret = 0;
+
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	has_deep_sleep = type->has_deep_sleep;
+	immrbase = get_immrbase();
+	pmc_dev = ofdev;
+
+	is_pci_agent = mpc83xx_is_pci_agent();
+	if (is_pci_agent < 0)
+		return is_pci_agent;
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return -ENODEV;
+
+	pmc_irq = irq_of_parse_and_map(np, 0);
+	if (pmc_irq != NO_IRQ) {
+		ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED,
+		                  "pmc", ofdev);
+
+		if (ret)
+			return -EBUSY;
+	}
+
+	pmc_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!pmc_regs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = of_address_to_resource(np, 1, &res);
+	if (ret) {
+		ret = -ENODEV;
+		goto out_pmc;
+	}
+
+	clock_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!clock_regs) {
+		ret = -ENOMEM;
+		goto out_pmc;
+	}
+
+	if (is_pci_agent)
+		mpc83xx_set_agent();
+
+	suspend_set_ops(&mpc83xx_suspend_ops);
+	return 0;
+
+out_pmc:
+	iounmap(pmc_regs);
+out:
+	if (pmc_irq != NO_IRQ)
+		free_irq(pmc_irq, ofdev);
+
+	return ret;
+}
+
+static int pmc_remove(struct of_device *ofdev)
+{
+	return -EPERM;
+};
+
+static struct pmc_type pmc_types[] = {
+	{
+		.has_deep_sleep = 1,
+	},
+	{
+		.has_deep_sleep = 0,
+	}
+};
+
+static struct of_device_id pmc_match[] = {
+	{
+		.compatible = "fsl,mpc8313-pmc",
+		.data = &pmc_types[0],
+	},
+	{
+		.compatible = "fsl,mpc8349-pmc",
+		.data = &pmc_types[1],
+	},
+	{}
+};
+
+static struct of_platform_driver pmc_driver = {
+	.name = "mpc83xx-pmc",
+	.match_table = pmc_match,
+	.probe = pmc_probe,
+	.remove = pmc_remove
+};
+
+static int pmc_init(void)
+{
+	return of_register_platform_driver(&pmc_driver);
+}
+
+module_init(pmc_init);

arch/powerpc/sysdev/fsl_soc.h

@@ -10,6 +10,7 @@ extern u32 get_baudrate(void);
 extern u32 fsl_get_sys_freq(void);
 
 struct spi_board_info;
+struct device_node;
 
 extern int fsl_spi_init(struct spi_board_info *board_infos,
 			unsigned int num_board_infos,

arch/powerpc/sysdev/ipic.c

@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
+#include <linux/fsl_devices.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -889,8 +890,78 @@ unsigned int ipic_get_irq(void)
 	return irq_linear_revmap(primary_ipic->irqhost, irq);
 }
 
+#ifdef CONFIG_PM
+static struct {
+	u32 sicfr;
+	u32 siprr[2];
+	u32 simsr[2];
+	u32 sicnr;
+	u32 smprr[2];
+	u32 semsr;
+	u32 secnr;
+	u32 sermr;
+	u32 sercr;
+} ipic_saved_state;
+
+static int ipic_suspend(struct sys_device *sdev, pm_message_t state)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_saved_state.sicfr = ipic_read(ipic->regs, IPIC_SICFR);
+	ipic_saved_state.siprr[0] = ipic_read(ipic->regs, IPIC_SIPRR_A);
+	ipic_saved_state.siprr[1] = ipic_read(ipic->regs, IPIC_SIPRR_D);
+	ipic_saved_state.simsr[0] = ipic_read(ipic->regs, IPIC_SIMSR_H);
+	ipic_saved_state.simsr[1] = ipic_read(ipic->regs, IPIC_SIMSR_L);
+	ipic_saved_state.sicnr = ipic_read(ipic->regs, IPIC_SICNR);
+	ipic_saved_state.smprr[0] = ipic_read(ipic->regs, IPIC_SMPRR_A);
+	ipic_saved_state.smprr[1] = ipic_read(ipic->regs, IPIC_SMPRR_B);
+	ipic_saved_state.semsr = ipic_read(ipic->regs, IPIC_SEMSR);
+	ipic_saved_state.secnr = ipic_read(ipic->regs, IPIC_SECNR);
+	ipic_saved_state.sermr = ipic_read(ipic->regs, IPIC_SERMR);
+	ipic_saved_state.sercr = ipic_read(ipic->regs, IPIC_SERCR);
+
+	if (fsl_deep_sleep()) {
+		/* In deep sleep, make sure there can be no
+		 * pending interrupts, as this can cause
+		 * problems on 831x.
+		 */
+		ipic_write(ipic->regs, IPIC_SIMSR_H, 0);
+		ipic_write(ipic->regs, IPIC_SIMSR_L, 0);
+		ipic_write(ipic->regs, IPIC_SEMSR, 0);
+		ipic_write(ipic->regs, IPIC_SERMR, 0);
+	}
+
+	return 0;
+}
+
+static int ipic_resume(struct sys_device *sdev)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_write(ipic->regs, IPIC_SICFR, ipic_saved_state.sicfr);
+	ipic_write(ipic->regs, IPIC_SIPRR_A, ipic_saved_state.siprr[0]);
+	ipic_write(ipic->regs, IPIC_SIPRR_D, ipic_saved_state.siprr[1]);
+	ipic_write(ipic->regs, IPIC_SIMSR_H, ipic_saved_state.simsr[0]);
+	ipic_write(ipic->regs, IPIC_SIMSR_L, ipic_saved_state.simsr[1]);
+	ipic_write(ipic->regs, IPIC_SICNR, ipic_saved_state.sicnr);
+	ipic_write(ipic->regs, IPIC_SMPRR_A, ipic_saved_state.smprr[0]);
+	ipic_write(ipic->regs, IPIC_SMPRR_B, ipic_saved_state.smprr[1]);
+	ipic_write(ipic->regs, IPIC_SEMSR, ipic_saved_state.semsr);
+	ipic_write(ipic->regs, IPIC_SECNR, ipic_saved_state.secnr);
+	ipic_write(ipic->regs, IPIC_SERMR, ipic_saved_state.sermr);
+	ipic_write(ipic->regs, IPIC_SERCR, ipic_saved_state.sercr);
+
+	return 0;
+}
+#else
+#define ipic_suspend NULL
+#define ipic_resume NULL
+#endif
+
 static struct sysdev_class ipic_sysclass = {
 	.name = "ipic",
+	.suspend = ipic_suspend,
+	.resume = ipic_resume,
 };
 
 static struct sys_device device_ipic = {

include/asm-powerpc/reg.h

@@ -155,10 +155,12 @@
 #define   CTRL_RUNLATCH	0x1
 #define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
 #define   DABR_TRANSLATION	(1UL << 2)
+#define SPRN_DABR2	0x13D	/* e300 */
 #define SPRN_DABRX	0x3F7	/* Data Address Breakpoint Register Extension */
 #define   DABRX_USER	(1UL << 0)
 #define   DABRX_KERNEL	(1UL << 1)
 #define SPRN_DAR	0x013	/* Data Address Register */
+#define SPRN_DBCR	0x136	/* e300 Data Breakpoint Control Reg */
 #define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
 #define   DSISR_NOHPTE		0x40000000	/* no translation found */
 #define   DSISR_PROTFAULT	0x08000000	/* protection fault */
@@ -264,6 +266,8 @@
 #define HID1_PS		(1<<16)		/* 750FX PLL selection */
 #define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
 #define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
+#define SPRN_IABR2	0x3FA		/* 83xx */
+#define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */
 #define SPRN_HID4	0x3F4		/* 970 HID4 */
 #define SPRN_HID5	0x3F6		/* 970 HID5 */
 #define SPRN_HID6	0x3F9	/* BE HID 6 */

include/linux/fsl_devices.h

@@ -125,4 +125,10 @@ struct mpc8xx_pcmcia_ops {
 	int(*voltage_set)(int slot, int vcc, int vpp);
 };
 
+/* Returns non-zero if the current suspend operation would
+ * lead to a deep sleep (i.e. power removed from the core,
+ * instead of just the clock).
+ */
+int fsl_deep_sleep(void);
+
 #endif /* _FSL_DEVICE_H_ */