提交 d46d132c 编写于 作者: E Eric Dumazet 提交者: David S. Miller

bnx2x: use netdev_alloc_frag()

Using netdev_alloc_frag() instead of kmalloc() permits better GRO or
TCP coalescing behavior, as skb_gro_receive() doesn't have to fallback
to frag_list overhead.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Dmitry Kravkov <dmitry@broadcom.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Acked-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d825da2e
......@@ -489,7 +489,7 @@ struct bnx2x_fastpath {
u32 ustorm_rx_prods_offset;
u32 rx_buf_size;
u32 rx_frag_size; /* 0 if kmalloced(), or rx_buf_size + NET_SKB_PAD */
dma_addr_t status_blk_mapping;
enum bnx2x_tpa_mode_t mode;
......
......@@ -552,6 +552,23 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
return 0;
}
static void bnx2x_frag_free(const struct bnx2x_fastpath *fp, void *data)
{
if (fp->rx_frag_size)
put_page(virt_to_head_page(data));
else
kfree(data);
}
static void *bnx2x_frag_alloc(const struct bnx2x_fastpath *fp)
{
if (fp->rx_frag_size)
return netdev_alloc_frag(fp->rx_frag_size);
return kmalloc(fp->rx_buf_size + NET_SKB_PAD, GFP_ATOMIC);
}
static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
struct bnx2x_agg_info *tpa_info,
u16 pages,
......@@ -574,15 +591,14 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
goto drop;
/* Try to allocate the new data */
new_data = kmalloc(fp->rx_buf_size + NET_SKB_PAD, GFP_ATOMIC);
new_data = bnx2x_frag_alloc(fp);
/* Unmap skb in the pool anyway, as we are going to change
pool entry status to BNX2X_TPA_STOP even if new skb allocation
fails. */
dma_unmap_single(&bp->pdev->dev, dma_unmap_addr(rx_buf, mapping),
fp->rx_buf_size, DMA_FROM_DEVICE);
if (likely(new_data))
skb = build_skb(data, 0);
skb = build_skb(data, fp->rx_frag_size);
if (likely(skb)) {
#ifdef BNX2X_STOP_ON_ERROR
......@@ -619,7 +635,7 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
return;
}
kfree(new_data);
bnx2x_frag_free(fp, new_data);
drop:
/* drop the packet and keep the buffer in the bin */
DP(NETIF_MSG_RX_STATUS,
......@@ -635,7 +651,7 @@ static int bnx2x_alloc_rx_data(struct bnx2x *bp,
struct eth_rx_bd *rx_bd = &fp->rx_desc_ring[index];
dma_addr_t mapping;
data = kmalloc(fp->rx_buf_size + NET_SKB_PAD, GFP_ATOMIC);
data = bnx2x_frag_alloc(fp);
if (unlikely(data == NULL))
return -ENOMEM;
......@@ -643,7 +659,7 @@ static int bnx2x_alloc_rx_data(struct bnx2x *bp,
fp->rx_buf_size,
DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
kfree(data);
bnx2x_frag_free(fp, data);
BNX2X_ERR("Can't map rx data\n");
return -ENOMEM;
}
......@@ -845,9 +861,9 @@ int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
dma_unmap_addr(rx_buf, mapping),
fp->rx_buf_size,
DMA_FROM_DEVICE);
skb = build_skb(data, 0);
skb = build_skb(data, fp->rx_frag_size);
if (unlikely(!skb)) {
kfree(data);
bnx2x_frag_free(fp, data);
bnx2x_fp_qstats(bp, fp)->
rx_skb_alloc_failed++;
goto next_rx;
......@@ -1145,7 +1161,7 @@ static void bnx2x_free_tpa_pool(struct bnx2x *bp,
dma_unmap_single(&bp->pdev->dev,
dma_unmap_addr(first_buf, mapping),
fp->rx_buf_size, DMA_FROM_DEVICE);
kfree(data);
bnx2x_frag_free(fp, data);
first_buf->data = NULL;
}
}
......@@ -1190,8 +1206,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
struct sw_rx_bd *first_buf =
&tpa_info->first_buf;
first_buf->data = kmalloc(fp->rx_buf_size + NET_SKB_PAD,
GFP_ATOMIC);
first_buf->data = bnx2x_frag_alloc(fp);
if (!first_buf->data) {
BNX2X_ERR("Failed to allocate TPA skb pool for queue[%d] - disabling TPA on this queue!\n",
j);
......@@ -1323,7 +1338,7 @@ static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp)
fp->rx_buf_size, DMA_FROM_DEVICE);
rx_buf->data = NULL;
kfree(data);
bnx2x_frag_free(fp, data);
}
}
......@@ -1782,6 +1797,10 @@ static void bnx2x_set_rx_buf_size(struct bnx2x *bp)
mtu +
BNX2X_FW_RX_ALIGN_END;
/* Note : rx_buf_size doesnt take into account NET_SKB_PAD */
if (fp->rx_buf_size + NET_SKB_PAD <= PAGE_SIZE)
fp->rx_frag_size = fp->rx_buf_size + NET_SKB_PAD;
else
fp->rx_frag_size = 0;
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册