提交 d1c1edbc 编写于 作者: D Daniel Vetter

drm/i915: move dri1 vblank stubs to i915_dma.c

i915_dma.c contains most of the old dri1 horror-show, so move
the remaining bits there, too. The code has been removed and
the only thing left are some stubs to ensure that userspace
doesn't try to use this stuff. vblank_pipe_set only returns 0
without any side-effects, so we can even stub it out with
the canonical drm_noop.

v2: Rebase against ENODEV changes.
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 7001f22f
......@@ -721,6 +721,48 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
return ret;
}
static int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_pipe_t *pipe = data;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
return 0;
}
/**
* Schedule buffer swap at given vertical blank.
*/
static int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
/* The delayed swap mechanism was fundamentally racy, and has been
* removed. The model was that the client requested a delayed flip/swap
* from the kernel, then waited for vblank before continuing to perform
* rendering. The problem was that the kernel might wake the client
* up before it dispatched the vblank swap (since the lock has to be
* held while touching the ringbuffer), in which case the client would
* clear and start the next frame before the swap occurred, and
* flicker would occur in addition to likely missing the vblank.
*
* In the absence of this ioctl, userland falls back to a correct path
* of waiting for a vblank, then dispatching the swap on its own.
* Context switching to userland and back is plenty fast enough for
* meeting the requirements of vblank swapping.
*/
return -EINVAL;
}
static int i915_flip_bufs(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
......@@ -2162,7 +2204,7 @@ struct drm_ioctl_desc i915_ioctls[] = {
DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, i915_cmdbuffer, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, i915_vblank_pipe_set, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, i915_vblank_pipe_get, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
......
......@@ -1156,13 +1156,6 @@ extern int i915_irq_wait(struct drm_device *dev, void *data,
extern void intel_irq_init(struct drm_device *dev);
extern int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv);
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
......
......@@ -1636,67 +1636,6 @@ static void valleyview_disable_vblank(struct drm_device *dev, int pipe)
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
/* Set the vblank monitor pipe
*/
int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
return 0;
}
int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_pipe_t *pipe = data;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
return 0;
}
/**
* Schedule buffer swap at given vertical blank.
*/
int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
/* The delayed swap mechanism was fundamentally racy, and has been
* removed. The model was that the client requested a delayed flip/swap
* from the kernel, then waited for vblank before continuing to perform
* rendering. The problem was that the kernel might wake the client
* up before it dispatched the vblank swap (since the lock has to be
* held while touching the ringbuffer), in which case the client would
* clear and start the next frame before the swap occurred, and
* flicker would occur in addition to likely missing the vblank.
*
* In the absence of this ioctl, userland falls back to a correct path
* of waiting for a vblank, then dispatching the swap on its own.
* Context switching to userland and back is plenty fast enough for
* meeting the requirements of vblank swapping.
*/
return -EINVAL;
}
static u32
ring_last_seqno(struct intel_ring_buffer *ring)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册