提交 d0d3e513 编写于 作者: E Eugeni Dodonov 提交者: Daniel Vetter

drm/i915: enable power wells on Haswell init

This attempts to enable all the available power wells during the
initialization.

Those power wells can be enabled in parallel or on-demand, and disabled
when no longer needed, but this is out of scope of this initial
enablement. Proper tracking of who uses which power well will require
a considerable rework of our display handling, so we just leave them all
enabled when the driver is loaded for now.

v2: use more generic and future-proof code
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 6ee8bab0
......@@ -3559,6 +3559,37 @@ void intel_sanitize_pm(struct drm_device *dev)
dev_priv->display.sanitize_pm(dev);
}
/* Starting with Haswell, we have different power wells for
* different parts of the GPU. This attempts to enable them all.
*/
void intel_init_power_wells(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long power_wells[] = {
HSW_PWR_WELL_CTL1,
HSW_PWR_WELL_CTL2,
HSW_PWR_WELL_CTL4
};
int i;
if (!IS_HASWELL(dev))
return;
mutex_lock(&dev->struct_mutex);
for (i = 0; i < ARRAY_SIZE(power_wells); i++) {
int well = I915_READ(power_wells[i]);
if ((well & HSW_PWR_WELL_STATE) == 0) {
I915_WRITE(power_wells[i], well & HSW_PWR_WELL_ENABLE);
if (wait_for(I915_READ(power_wells[i] & HSW_PWR_WELL_STATE), 20))
DRM_ERROR("Error enabling power well %lx\n", power_wells[i]);
}
}
mutex_unlock(&dev->struct_mutex);
}
/* Set up chip specific power management-related functions */
void intel_init_pm(struct drm_device *dev)
{
......@@ -3707,5 +3738,10 @@ void intel_init_pm(struct drm_device *dev)
else
dev_priv->display.get_fifo_size = i830_get_fifo_size;
}
/* We attempt to init the necessary power wells early in the initialization
* time, so the subsystems that expect power to be enabled can work.
*/
intel_init_power_wells(dev);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册