提交 cffb9dd0 编写于 作者: J Jean Delvare

hwmon: (adt7475) Rework voltage inputs handling

Rework the handling of voltage inputs to make it possible and easy to
support more inputs. This will be needed for the upcoming ADT7490
support.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
上级 f99318b2
......@@ -39,7 +39,7 @@
/* 7475 Common Registers */
#define REG_VOLTAGE_BASE 0x21
#define REG_VOLTAGE_BASE 0x20
#define REG_TEMP_BASE 0x25
#define REG_TACH_BASE 0x28
#define REG_PWM_BASE 0x30
......@@ -51,8 +51,8 @@
#define REG_STATUS1 0x41
#define REG_STATUS2 0x42
#define REG_VOLTAGE_MIN_BASE 0x46
#define REG_VOLTAGE_MAX_BASE 0x47
#define REG_VOLTAGE_MIN_BASE 0x44
#define REG_VOLTAGE_MAX_BASE 0x45
#define REG_TEMP_MIN_BASE 0x4E
#define REG_TEMP_MAX_BASE 0x4F
......@@ -85,7 +85,7 @@
/* ADT7475 Settings */
#define ADT7475_VOLTAGE_COUNT 2
#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */
#define ADT7475_TEMP_COUNT 3
#define ADT7475_TACH_COUNT 4
#define ADT7475_PWM_COUNT 3
......@@ -137,8 +137,9 @@ struct adt7475_data {
u8 config4;
u8 config5;
u8 has_voltage;
u16 alarms;
u16 voltage[3][3];
u16 voltage[3][6];
u16 temp[7][3];
u16 tach[2][4];
u8 pwm[4][3];
......@@ -201,26 +202,30 @@ static inline u16 rpm2tach(unsigned long rpm)
return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
}
static inline int reg2vcc(u16 reg)
{
return (4296 * reg) / 1000;
}
/* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */
static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = {
{ 45, 94 }, /* +2.5V */
{ 175, 525 }, /* Vccp */
{ 68, 71 }, /* Vcc */
{ 93, 47 }, /* +5V */
{ 120, 20 }, /* +12V */
{ 45, 45 }, /* Vtt */
};
static inline int reg2vccp(u16 reg)
static inline int reg2volt(int channel, u16 reg)
{
return (2929 * reg) / 1000;
}
const int *r = adt7473_in_scaling[channel];
static inline u16 vcc2reg(long vcc)
{
vcc = SENSORS_LIMIT(vcc, 0, 4396);
return (vcc * 1000) / 4296;
return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024);
}
static inline u16 vccp2reg(long vcc)
static inline u16 volt2reg(int channel, long volt)
{
vcc = SENSORS_LIMIT(vcc, 0, 2998);
return (vcc * 1000) / 2929;
const int *r = adt7473_in_scaling[channel];
long reg;
reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2);
}
static u16 adt7475_read_word(struct i2c_client *client, int reg)
......@@ -276,12 +281,10 @@ static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
switch (sattr->nr) {
case ALARM:
return sprintf(buf, "%d\n",
(data->alarms >> (sattr->index + 1)) & 1);
(data->alarms >> sattr->index) & 1);
default:
val = data->voltage[sattr->nr][sattr->index];
return sprintf(buf, "%d\n",
sattr->index ==
0 ? reg2vccp(val) : reg2vcc(val));
return sprintf(buf, "%d\n", reg2volt(sattr->index, val));
}
}
......@@ -300,8 +303,7 @@ static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->voltage[sattr->nr][sattr->index] =
sattr->index ? vcc2reg(val) : vccp2reg(val);
data->voltage[sattr->nr][sattr->index] = volt2reg(sattr->index, val);
if (sattr->nr == MIN)
reg = VOLTAGE_MIN_REG(sattr->index);
......@@ -815,18 +817,18 @@ static ssize_t set_pwm_at_crit(struct device *dev,
return count;
}
static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MAX, 0);
set_voltage, MAX, 1);
static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MIN, 0);
static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
set_voltage, MIN, 1);
static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 2);
static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MAX, 1);
set_voltage, MAX, 2);
static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MIN, 1);
static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
set_voltage, MIN, 2);
static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2);
static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
......@@ -1050,6 +1052,12 @@ static int adt7475_probe(struct i2c_client *client,
mutex_init(&data->lock);
i2c_set_clientdata(client, data);
/* Initialize device-specific values */
switch (id->driver_data) {
default:
data->has_voltage = 0x06; /* in1, in2 */
}
/* Call adt7475_read_pwm for all pwm's as this will reprogram any
pwm's which are disabled to manual mode with 0% duty cycle */
for (i = 0; i < ADT7475_PWM_COUNT; i++)
......@@ -1176,10 +1184,13 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
data->alarms |= adt7475_read(REG_STATUS1);
ext = adt7475_read(REG_EXTEND1);
for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++)
for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
if (!(data->has_voltage & (1 << i)))
continue;
data->voltage[INPUT][i] =
(adt7475_read(VOLTAGE_REG(i)) << 2) |
((ext >> ((i + 1) * 2)) & 3);
((ext >> (i * 2)) & 3);
}
ext = adt7475_read(REG_EXTEND2);
for (i = 0; i < ADT7475_TEMP_COUNT; i++)
......@@ -1205,6 +1216,8 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
data->config5 = adt7475_read(REG_CONFIG5);
for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
if (!(data->has_voltage & (1 << i)))
continue;
/* Adjust values so they match the input precision */
data->voltage[MIN][i] =
adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册