提交 ce9c008c 编写于 作者: M Magnus Damm 提交者: Paul Mundt

video: export sh_mobile_lcdc panel size

Export the LCD panel size for sh_mobile_lcdc boards. This allows us
to perform dpi and screen aspect ratio calculations in user space.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 0c13bf1e
......@@ -140,6 +140,10 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.vsync_len = 1,
.sync = 0, /* hsync and vsync are active low */
},
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
},
.board_cfg = {
.display_on = ap320_wvga_power_on,
},
......
......@@ -224,6 +224,10 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
.vsync_len = 2,
.sync = 0,
},
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
},
}
#endif
#ifdef CONFIG_SH_MIGOR_QVGA
......@@ -245,6 +249,10 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
.vsync_len = 2,
.sync = FB_SYNC_HOR_HIGH_ACT,
},
.lcd_size_cfg = { /* 2.4 inch */
.width = 49,
.height = 37,
},
.board_cfg = {
.setup_sys = migor_lcd_qvga_setup,
},
......
......@@ -47,12 +47,18 @@ struct sh_mobile_lcdc_board_cfg {
void (*display_off)(void *board_data);
};
struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
unsigned long width;
unsigned long height;
};
struct sh_mobile_lcdc_chan_cfg {
int chan;
int bpp;
int interface_type; /* selects RGBn or SYSn I/F, see above */
int clock_divider;
struct fb_videomode lcd_cfg;
struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
struct sh_mobile_lcdc_board_cfg board_cfg;
struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
};
......
......@@ -595,6 +595,8 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
info->fbops = &sh_mobile_lcdc_ops;
info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
info->var.width = cfg->lcd_size_cfg.width;
info->var.height = cfg->lcd_size_cfg.height;
info->var.activate = FB_ACTIVATE_NOW;
error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
if (error)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册