提交 c9b75d51 编写于 作者: H Heiko Stübner 提交者: Olof Johansson

ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288

rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux
settings depending on the card state. This collides with a lot of assumptions.

It only works when using the internal card-detect mechanism and breaks
horribly when using either the normal card-detect via the slot-gpio function
or via any other pin. Also there is of course no link between the mmc and jtag
on the software-side, so the jtag clocks may very well be disabled when the
card is ejected and the soc switches back to the jtag pinmux.

Leaving the switching function enabled did result in mmc timeouts and rcu
stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases,
as we expect the devicetree to explicitly select either mmc or jtag pinmuxes
anyway.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>
上级 1dbb36bc
......@@ -19,11 +19,37 @@
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/irqchip.h>
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
#include "core.h"
#define RK3288_GRF_SOC_CON0 0x244
static void __init rockchip_timer_init(void)
{
if (of_machine_is_compatible("rockchip,rk3288")) {
struct regmap *grf;
/*
* Disable auto jtag/sdmmc switching that causes issues
* with the mmc controllers making them unreliable
*/
grf = syscon_regmap_lookup_by_compatible("rockchip,rk3288-grf");
if (!IS_ERR(grf))
regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000);
else
pr_err("rockchip: could not get grf syscon\n");
}
of_clk_init(NULL);
clocksource_of_init();
}
static void __init rockchip_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
......@@ -42,6 +68,7 @@ static const char * const rockchip_board_dt_compat[] = {
DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.init_time = rockchip_timer_init,
.dt_compat = rockchip_board_dt_compat,
.init_machine = rockchip_dt_init,
MACHINE_END
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册