提交 c833484e 编写于 作者: A Antonio Quartulli 提交者: Antonio Quartulli

batman-adv: ELP - compute the metric based on the estimated throughput

In case of wireless interface retrieve the throughput by
querying cfg80211. To perform this call a separate work
must be scheduled because the function may sleep and this
is not allowed within an RCU protected context (RCU in this
case is used to iterate over all the neighbours).

Use ethtool to retrieve information about an Ethernet link
like HALF/FULL_DUPLEX and advertised bandwidth (e.g.
100/10Mbps).

The metric is updated each time a new ELP packet is sent,
this way it is possible to timely react to a metric
variation which can imply (for example) a neighbour
disconnection.
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
上级 95d39278
......@@ -17,7 +17,7 @@ config BATMAN_ADV
config BATMAN_ADV_BATMAN_V
bool "B.A.T.M.A.N. V protocol (experimental)"
depends on BATMAN_ADV
depends on BATMAN_ADV && CFG80211
default n
help
This option enables the B.A.T.M.A.N. V protocol, the successor
......
......@@ -21,6 +21,7 @@
#include <linux/atomic.h>
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/workqueue.h>
#include "bat_v_elp.h"
#include "bat_v_ogm.h"
......@@ -65,6 +66,8 @@ static void
batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh)
{
ewma_throughput_init(&hardif_neigh->bat_v.throughput);
INIT_WORK(&hardif_neigh->bat_v.metric_work,
batadv_v_elp_throughput_metric_update);
}
static void batadv_v_ogm_schedule(struct batadv_hard_iface *hard_iface)
......
......@@ -22,19 +22,23 @@
#include <linux/byteorder/generic.h>
#include <linux/errno.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/fs.h>
#include <linux/if_ether.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/netdevice.h>
#include <linux/random.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include <net/cfg80211.h>
#include "bat_algo.h"
#include "bat_v_ogm.h"
......@@ -59,6 +63,107 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
msecs_to_jiffies(msecs));
}
/**
* batadv_v_elp_get_throughput - get the throughput towards a neighbour
* @neigh: the neighbour for which the throughput has to be obtained
*
* Return: The throughput towards the given neighbour in multiples of 100kpbs
* (a value of '1' equals to 0.1Mbps, '10' equals 1Mbps, etc).
*/
static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
{
struct batadv_hard_iface *hard_iface = neigh->if_incoming;
struct ethtool_link_ksettings link_settings;
struct station_info sinfo;
u32 throughput;
int ret;
/* if the user specified a customised value for this interface, then
* return it directly
*/
throughput = atomic_read(&hard_iface->bat_v.throughput_override);
if (throughput != 0)
return throughput;
/* if this is a wireless device, then ask its throughput through
* cfg80211 API
*/
if (batadv_is_wifi_netdev(hard_iface->net_dev)) {
if (hard_iface->net_dev->ieee80211_ptr) {
ret = cfg80211_get_station(hard_iface->net_dev,
neigh->addr, &sinfo);
if (ret == -ENOENT) {
/* Node is not associated anymore! It would be
* possible to delete this neighbor. For now set
* the throughput metric to 0.
*/
return 0;
}
if (!ret)
return sinfo.expected_throughput / 100;
}
/* unsupported WiFi driver version */
goto default_throughput;
}
/* if not a wifi interface, check if this device provides data via
* ethtool (e.g. an Ethernet adapter)
*/
memset(&link_settings, 0, sizeof(link_settings));
rtnl_lock();
ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings);
rtnl_unlock();
if (ret == 0) {
/* link characteristics might change over time */
if (link_settings.base.duplex == DUPLEX_FULL)
hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
else
hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
throughput = link_settings.base.speed;
if (throughput && (throughput != SPEED_UNKNOWN))
return throughput * 10;
}
default_throughput:
if (!(hard_iface->bat_v.flags & BATADV_WARNING_DEFAULT)) {
batadv_info(hard_iface->soft_iface,
"WiFi driver or ethtool info does not provide information about link speeds on interface %s, therefore defaulting to hardcoded throughput values of %u.%1u Mbps. Consider overriding the throughput manually or checking your driver.\n",
hard_iface->net_dev->name,
BATADV_THROUGHPUT_DEFAULT_VALUE / 10,
BATADV_THROUGHPUT_DEFAULT_VALUE % 10);
hard_iface->bat_v.flags |= BATADV_WARNING_DEFAULT;
}
/* if none of the above cases apply, return the base_throughput */
return BATADV_THROUGHPUT_DEFAULT_VALUE;
}
/**
* batadv_v_elp_throughput_metric_update - worker updating the throughput metric
* of a single hop neighbour
* @work: the work queue item
*/
void batadv_v_elp_throughput_metric_update(struct work_struct *work)
{
struct batadv_hardif_neigh_node_bat_v *neigh_bat_v;
struct batadv_hardif_neigh_node *neigh;
neigh_bat_v = container_of(work, struct batadv_hardif_neigh_node_bat_v,
metric_work);
neigh = container_of(neigh_bat_v, struct batadv_hardif_neigh_node,
bat_v);
ewma_throughput_add(&neigh->bat_v.throughput,
batadv_v_elp_get_throughput(neigh));
/* decrement refcounter to balance increment performed before scheduling
* this task
*/
batadv_hardif_neigh_put(neigh);
}
/**
* batadv_v_elp_periodic_work - ELP periodic task per interface
* @work: work queue item
......@@ -67,6 +172,7 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
*/
static void batadv_v_elp_periodic_work(struct work_struct *work)
{
struct batadv_hardif_neigh_node *hardif_neigh;
struct batadv_hard_iface *hard_iface;
struct batadv_hard_iface_bat_v *bat_v;
struct batadv_elp_packet *elp_packet;
......@@ -108,6 +214,31 @@ static void batadv_v_elp_periodic_work(struct work_struct *work)
atomic_inc(&hard_iface->bat_v.elp_seqno);
/* The throughput metric is updated on each sent packet. This way, if a
* node is dead and no longer sends packets, batman-adv is still able to
* react timely to its death.
*
* The throughput metric is updated by following these steps:
* 1) if the hard_iface is wifi => send a number of unicast ELPs for
* probing/sampling to each neighbor
* 2) update the throughput metric value of each neighbor (note that the
* value retrieved in this step might be 100ms old because the
* probing packets at point 1) could still be in the HW queue)
*/
rcu_read_lock();
hlist_for_each_entry_rcu(hardif_neigh, &hard_iface->neigh_list, list) {
if (!kref_get_unless_zero(&hardif_neigh->refcount))
continue;
/* Reading the estimated throughput from cfg80211 is a task that
* may sleep and that is not allowed in an rcu protected
* context. Therefore schedule a task for that.
*/
queue_work(batadv_event_workqueue,
&hardif_neigh->bat_v.metric_work);
}
rcu_read_unlock();
restart_timer:
batadv_v_elp_start_timer(hard_iface);
out:
......@@ -146,6 +277,15 @@ int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface)
atomic_set(&hard_iface->bat_v.elp_seqno, random_seqno);
atomic_set(&hard_iface->bat_v.elp_interval, 500);
/* assume full-duplex by default */
hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
/* warn the user (again) if there is no throughput data is available */
hard_iface->bat_v.flags &= ~BATADV_WARNING_DEFAULT;
if (batadv_is_wifi_netdev(hard_iface->net_dev))
hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
INIT_DELAYED_WORK(&hard_iface->bat_v.elp_wq,
batadv_v_elp_periodic_work);
batadv_v_elp_start_timer(hard_iface);
......
......@@ -21,11 +21,13 @@
#define _NET_BATMAN_ADV_BAT_V_ELP_H_
struct sk_buff;
struct work_struct;
int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface);
void batadv_v_elp_iface_disable(struct batadv_hard_iface *hard_iface);
void batadv_v_elp_primary_iface_set(struct batadv_hard_iface *primary_iface);
int batadv_v_elp_packet_recv(struct sk_buff *skb,
struct batadv_hard_iface *if_incoming);
void batadv_v_elp_throughput_metric_update(struct work_struct *work);
#endif /* _NET_BATMAN_ADV_BAT_V_ELP_H_ */
......@@ -339,7 +339,7 @@ static u32 batadv_v_forward_penalty(struct batadv_priv *bat_priv,
*/
if ((throughput > 10) &&
(if_incoming == if_outgoing) &&
(batadv_is_wifi_netdev(if_incoming->net_dev)))
!(if_incoming->bat_v.flags & BATADV_FULL_DUPLEX))
return throughput / 2;
/* hop penalty of 255 equals 100% */
......
......@@ -62,6 +62,7 @@
#define BATADV_TQ_TOTAL_BIDRECT_LIMIT 1
/* B.A.T.M.A.N. V */
#define BATADV_THROUGHPUT_DEFAULT_VALUE 10 /* 1 Mbps */
#define BATADV_ELP_MAX_AGE 64
#define BATADV_OGM_MAX_ORIGDIFF 5
#define BATADV_OGM_MAX_AGE 64
......
......@@ -86,6 +86,18 @@ struct batadv_hard_iface_bat_iv {
atomic_t ogm_seqno;
};
/**
* enum batadv_v_hard_iface_flags - interface flags useful to B.A.T.M.A.N. V
* @BATADV_FULL_DUPLEX: tells if the connection over this link is full-duplex
* @BATADV_WARNING_DEFAULT: tells whether we have warned the user that no
* throughput data is available for this interface and that default values are
* assumed.
*/
enum batadv_v_hard_iface_flags {
BATADV_FULL_DUPLEX = BIT(0),
BATADV_WARNING_DEFAULT = BIT(1),
};
/**
* struct batadv_hard_iface_bat_v - per hard-interface B.A.T.M.A.N. V data
* @elp_interval: time interval between two ELP transmissions
......@@ -93,6 +105,7 @@ struct batadv_hard_iface_bat_iv {
* @elp_skb: base skb containing the ELP message to send
* @elp_wq: workqueue used to schedule ELP transmissions
* @throughput_override: throughput override to disable link auto-detection
* @flags: interface specific flags
*/
struct batadv_hard_iface_bat_v {
atomic_t elp_interval;
......@@ -100,6 +113,7 @@ struct batadv_hard_iface_bat_v {
struct sk_buff *elp_skb;
struct delayed_work elp_wq;
atomic_t throughput_override;
u8 flags;
};
/**
......@@ -378,12 +392,14 @@ DECLARE_EWMA(throughput, 1024, 8)
* @elp_interval: time interval between two ELP transmissions
* @elp_latest_seqno: latest and best known ELP sequence number
* @last_unicast_tx: when the last unicast packet has been sent to this neighbor
* @metric_work: work queue callback item for metric update
*/
struct batadv_hardif_neigh_node_bat_v {
struct ewma_throughput throughput;
u32 elp_interval;
u32 elp_latest_seqno;
unsigned long last_unicast_tx;
struct work_struct metric_work;
};
/**
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册