提交 c6722048 编写于 作者: A Adrian Bunk 提交者: Linus Torvalds

[PATCH] The scheduled removal of some OSS options

The scheduled removal of the OSS drivers depending on OSS_OBSOLETE_DRIVER.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 de21c57b
......@@ -173,38 +173,6 @@ config RADIO_MAESTRO
To compile this driver as a module, choose M here: the
module will be called radio-maestro.
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
---help---
Choose Y here if you have this FM radio card. You also need to say Y
to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
for this to work.
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
this API and pointers to "v4l" programs may be found at
<file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called miropcm20.
config RADIO_MIROPCM20_RDS
tristate "miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)"
depends on RADIO_MIROPCM20 && EXPERIMENTAL
---help---
Choose Y here if you want to see RDS/RBDS information like
RadioText, Programme Service name, Clock Time and date, Programme
Type and Traffic Announcement/Programme identification.
It's not possible to read the raw RDS packets from the device, so
the driver cant provide an V4L interface for this. But the
availability of RDS is reported over V4L by the basic driver
already. Here RDS can be read from files in /dev/v4l/rds.
To compile this driver as a module, choose M here: the
module will be called miropcm20-rds.
config RADIO_SF16FMI
tristate "SF16FMI Radio"
depends on ISA && VIDEO_V4L2
......
......@@ -5,20 +5,6 @@
#
# Prompt user for primary drivers.
config OSS_OBSOLETE_DRIVER
bool "Obsolete OSS drivers"
depends on SOUND_PRIME
help
This option enables support for obsolete OSS drivers that
are scheduled for removal in the near future since there
are ALSA drivers for the same hardware.
Please contact Adrian Bunk <bunk@stusta.de> if you had to
say Y here because your soundcard is not properly supported
by ALSA.
If unsure, say N.
config SOUND_BT878
tristate "BT878 audio dma"
depends on SOUND_PRIME && PCI
......@@ -35,40 +21,6 @@ config SOUND_BT878
To compile this driver as a module, choose M here: the module will
be called btaudio.
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
For more information on this driver and the degree of support for
the different card models please check:
<http://sourceforge.net/projects/emu10k1/>
It is now possible to load dsp microcode patches into the EMU10K1
chip. These patches are used to implement real time sound
processing effects which include for example: signal routing,
bass/treble control, AC3 passthrough, ...
Userspace tools to create new patches and load/unload them can be
found in the emu-tools package at the above URL.
config MIDI_EMU10K1
bool "Creative SBLive! MIDI (EXPERIMENTAL)"
depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API
help
Say Y if you want to be able to use the OSS /dev/sequencer
interface. This code is still experimental.
config SOUND_FUSION
tristate "Crystal SoundFusion (CS4280/461x)"
depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
help
This module drives the Crystal SoundFusion devices (CS4280/46xx
series) when wired as native sound drivers with AC97 codecs. If
this driver does not work try the CS4232 driver.
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
......@@ -448,47 +400,6 @@ config SOUND_DMAP
Say Y unless you have 16MB or more RAM or a PCI sound card.
config SOUND_AD1816
tristate "AD1816(A) based cards (EXPERIMENTAL)"
depends on EXPERIMENTAL && SOUND_OSS && OSS_OBSOLETE_DRIVER
help
Say M here if you have a sound card based on the Analog Devices
AD1816(A) chip.
If you compile the driver into the kernel, you have to add
"ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
config SOUND_AD1889
tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
depends on EXPERIMENTAL && SOUND_OSS && PCI && OSS_OBSOLETE_DRIVER
help
Say M here if you have a sound card based on the Analog Devices
AD1889 chip.
config SOUND_ADLIB
tristate "Adlib Cards"
depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
help
Includes ASB 64 4D. Information on programming AdLib cards is
available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
config SOUND_ACI_MIXER
tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
---help---
ACI (Audio Command Interface) is a protocol used to communicate with
the microcontroller on some sound cards produced by miro and
Cardinal Technologies. The main function of the ACI is to control
the mixer and to get a product identification.
This VoxWare ACI driver currently supports the ACI functions on the
miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI
also controls the radio tuner. This is supported in the video4linux
miropcm20 driver (say M or Y here and go back to "Multimedia
devices" -> "Radio Adapters").
This driver is also available as a module and will be called aci.
config SOUND_CS4232
tristate "Crystal CS4232 based (PnP) cards"
depends on SOUND_OSS
......@@ -594,18 +505,6 @@ config SOUND_MPU401
If you compile the driver into the kernel, you have to add
"mpu401=<io>,<irq>" to the kernel command line.
config SOUND_NM256
tristate "NM256AV/NM256ZX audio support"
depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
help
Say M here to include audio support for the NeoMagic 256AV/256ZX
chipsets. These are the audio chipsets found in the Sony
Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt
laptops. It includes support for an AC97-compatible mixer and an
apparently proprietary sound engine.
See <file:Documentation/sound/oss/NM256> for further information.
config SOUND_PAS
tristate "ProAudioSpectrum 16 support"
depends on SOUND_OSS
......@@ -714,20 +613,6 @@ config SOUND_YM3812
If unsure, say Y.
config SOUND_OPL3SA2
tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
help
Say Y or M if you have a card based on one of these Yamaha sound
chipsets or the "SAx", which is actually a SA3. Read
<file:Documentation/sound/oss/OPL3-SA2> for more information on
configuring these cards.
If you compile the driver into the kernel and do not also
configure in the optional ISA PnP support, you will have to add
"opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
command line.
config SOUND_UART6850
tristate "6850 UART support"
depends on SOUND_OSS
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册