提交 c600636b 编写于 作者: A Amir Hanania 提交者: Jeff Kirsher

ixgbe: work around for DDP last buffer size

A HW limitation was recently discovered where the last buffer in a DDP offload
cannot be a full buffer size in length. Fix the issue with a work around by
adding another buffer with size = 1.
Signed-off-by: NAmir Hanania <amir.hanania@intel.com>
Tested-by: NRoss Brattain <ross.b.brattain@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 4c7e604b
......@@ -159,7 +159,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
struct scatterlist *sg;
unsigned int i, j, dmacount;
unsigned int len;
static const unsigned int bufflen = 4096;
static const unsigned int bufflen = IXGBE_FCBUFF_MIN;
unsigned int firstoff = 0;
unsigned int lastsize;
unsigned int thisoff = 0;
......@@ -254,6 +254,24 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
/* only the last buffer may have non-full bufflen */
lastsize = thisoff + thislen;
/*
* lastsize can not be buffer len.
* If it is then adding another buffer with lastsize = 1.
*/
if (lastsize == bufflen) {
if (j >= IXGBE_BUFFCNT_MAX) {
e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
"not enough user buffers. We need an extra "
"buffer because lastsize is bufflen.\n",
xid, i, j, dmacount, (u64)addr);
goto out_noddp_free;
}
ddp->udl[j] = (u64)(fcoe->extra_ddp_buffer_dma);
j++;
lastsize = 1;
}
fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
......@@ -532,6 +550,24 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
e_err(drv, "failed to allocated FCoE DDP pool\n");
spin_lock_init(&fcoe->lock);
/* Extra buffer to be shared by all DDPs for HW work around */
fcoe->extra_ddp_buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC);
if (fcoe->extra_ddp_buffer == NULL) {
e_err(drv, "failed to allocated extra DDP buffer\n");
goto out_extra_ddp_buffer_alloc;
}
fcoe->extra_ddp_buffer_dma =
dma_map_single(&adapter->pdev->dev,
fcoe->extra_ddp_buffer,
IXGBE_FCBUFF_MIN,
DMA_FROM_DEVICE);
if (dma_mapping_error(&adapter->pdev->dev,
fcoe->extra_ddp_buffer_dma)) {
e_err(drv, "failed to map extra DDP buffer\n");
goto out_extra_ddp_buffer_dma;
}
}
/* Enable L2 eth type filter for FCoE */
......@@ -581,6 +617,14 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
}
}
#endif
return;
out_extra_ddp_buffer_dma:
kfree(fcoe->extra_ddp_buffer);
out_extra_ddp_buffer_alloc:
pci_pool_destroy(fcoe->pool);
fcoe->pool = NULL;
}
/**
......@@ -600,6 +644,11 @@ void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter)
if (fcoe->pool) {
for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++)
ixgbe_fcoe_ddp_put(adapter->netdev, i);
dma_unmap_single(&adapter->pdev->dev,
fcoe->extra_ddp_buffer_dma,
IXGBE_FCBUFF_MIN,
DMA_FROM_DEVICE);
kfree(fcoe->extra_ddp_buffer);
pci_pool_destroy(fcoe->pool);
fcoe->pool = NULL;
}
......
......@@ -70,6 +70,8 @@ struct ixgbe_fcoe {
spinlock_t lock;
struct pci_pool *pool;
struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
unsigned char *extra_ddp_buffer;
dma_addr_t extra_ddp_buffer_dma;
};
#endif /* _IXGBE_FCOE_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册