提交 bd43da8f 编写于 作者: A Atsushi Nemoto 提交者: Ralf Baechle

[MIPS] tc35815: Load MAC address via platform_device

TX49XX SoCs include PCI NIC (TC35815 compatible) connected via its
internal PCI bus, but the NIC's PROM interface is not connected to
SEEPROM.  So we must provide its ethernet address by another way.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 295cbf6d
......@@ -23,9 +23,9 @@
*/
#ifdef TC35815_NAPI
#define DRV_VERSION "1.35-NAPI"
#define DRV_VERSION "1.36-NAPI"
#else
#define DRV_VERSION "1.35"
#define DRV_VERSION "1.36"
#endif
static const char *version = "tc35815.c:v" DRV_VERSION "\n";
#define MODNAME "tc35815"
......@@ -49,6 +49,7 @@ static const char *version = "tc35815.c:v" DRV_VERSION "\n";
#include <linux/pci.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/byteorder.h>
......@@ -597,13 +598,46 @@ static int tc_mdio_read(struct net_device *dev, int phy_id, int location);
static void tc_mdio_write(struct net_device *dev, int phy_id, int location,
int val);
static void __devinit tc35815_init_dev_addr (struct net_device *dev)
#ifdef CONFIG_CPU_TX49XX
/*
* Find a platform_device providing a MAC address. The platform code
* should provide a "tc35815-mac" device with a MAC address in its
* platform_data.
*/
static int __devinit tc35815_mac_match(struct device *dev, void *data)
{
struct platform_device *plat_dev = to_platform_device(dev);
struct pci_dev *pci_dev = data;
unsigned int id = (pci_dev->bus->number << 8) | pci_dev->devfn;
return !strcmp(plat_dev->name, "tc35815-mac") && plat_dev->id == id;
}
static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev)
{
struct tc35815_local *lp = dev->priv;
struct device *pd = bus_find_device(&platform_bus_type, NULL,
lp->pci_dev, tc35815_mac_match);
if (pd) {
if (pd->platform_data)
memcpy(dev->dev_addr, pd->platform_data, ETH_ALEN);
put_device(pd);
return is_valid_ether_addr(dev->dev_addr) ? 0 : -ENODEV;
}
return -ENODEV;
}
#else
static int __devinit tc35815_read_plat_dev_addr(struct device *dev)
{
return -ENODEV;
}
#endif
static int __devinit tc35815_init_dev_addr (struct net_device *dev)
{
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
int i;
/* dev_addr will be overwritten on NETDEV_REGISTER event */
while (tc_readl(&tr->PROM_Ctl) & PROM_Busy)
;
for (i = 0; i < 6; i += 2) {
......@@ -615,6 +649,9 @@ static void __devinit tc35815_init_dev_addr (struct net_device *dev)
dev->dev_addr[i] = data & 0xff;
dev->dev_addr[i+1] = data >> 8;
}
if (!is_valid_ether_addr(dev->dev_addr))
return tc35815_read_plat_dev_addr(dev);
return 0;
}
static int __devinit tc35815_init_one (struct pci_dev *pdev,
......@@ -724,7 +761,10 @@ static int __devinit tc35815_init_one (struct pci_dev *pdev,
tc35815_chip_reset(dev);
/* Retrieve the ethernet address. */
tc35815_init_dev_addr(dev);
if (tc35815_init_dev_addr(dev)) {
dev_warn(&pdev->dev, "not valid ether addr\n");
random_ether_addr(dev->dev_addr);
}
rc = register_netdev (dev);
if (rc)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册