提交 bc63d387 编写于 作者: D Dean Nelson 提交者: Linus Torvalds

sgi-xp: support runtime selection of xp_max_npartitions

Support runtime selection of the max number of partitions based on the
hardware being run on.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 78ce1bbe
......@@ -3,7 +3,8 @@
#
obj-$(CONFIG_SGI_XP) += xp.o
xp-y := xp_main.o xp_nofault.o
xp-y := xp_main.o xp_uv.o
xp-$(CONFIG_IA64) += xp_sn2.o xp_nofault.o
obj-$(CONFIG_SGI_XP) += xpc.o
xpc-y := xpc_main.o xpc_channel.o xpc_partition.o
......
......@@ -18,6 +18,9 @@
#include <linux/mutex.h>
#include <asm/sn/types.h>
#include <asm/sn/bte.h>
#ifdef CONFIG_IA64
#include <asm/sn/arch.h>
#endif
/* >>> Add this #define to some linux header file some day. */
#define BYTES_PER_WORD sizeof(void *)
......@@ -45,17 +48,18 @@
#endif
/*
* Define the maximum number of logically defined partitions the system
* can support. It is constrained by the maximum number of hardware
* partitionable regions. The term 'region' in this context refers to the
* minimum number of nodes that can comprise an access protection grouping.
* The access protection is in regards to memory, IPI and IOI.
* Define the maximum number of partitions the system can possibly support.
* It is based on the maximum number of hardware partitionable regions. The
* term 'region' in this context refers to the minimum number of nodes that
* can comprise an access protection grouping. The access protection is in
* regards to memory, IPI and IOI.
*
* The maximum number of hardware partitionable regions is equal to the
* maximum number of nodes in the entire system divided by the minimum number
* of nodes that comprise an access protection grouping.
*/
#define XP_MAX_PARTITIONS 64
#define XP_MAX_NPARTITIONS_SN2 64
#define XP_MAX_NPARTITIONS_UV 256
/*
* Define the number of u64s required to represent all the C-brick nasids
......@@ -112,24 +116,28 @@ xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
* other partition that is currently up. Over these channels, kernel-level
* `users' can communicate with their counterparts on the other partitions.
*
* The maxinum number of channels is limited to eight. For performance reasons,
* the internal cross partition structures require sixteen bytes per channel,
* and eight allows all of this interface-shared info to fit in one cache line.
>>> The following described limitation of a max of eight channels possible
>>> pertains only to ia64-sn2. THIS ISN'T TRUE SINCE I'M PLANNING TO JUST
>>> TIE INTO THE EXISTING MECHANISM ONCE THE CHANNEL MESSAGES ARE RECEIVED.
>>> THE 128-BYTE CACHELINE PERFORMANCE ISSUE IS TIED TO IA64-SN2.
*
* XPC_NCHANNELS reflects the total number of channels currently defined.
* If the need for additional channels arises, one can simply increase
* XPC_NCHANNELS accordingly. If the day should come where that number
* exceeds the MAXIMUM number of channels allowed (eight), then one will need
* to make changes to the XPC code to allow for this.
* XPC_MAX_NCHANNELS accordingly. If the day should come where that number
* exceeds the absolute MAXIMUM number of channels possible (eight), then one
* will need to make changes to the XPC code to accommodate for this.
*
* The absolute maximum number of channels possible is currently limited to
* eight for performance reasons. The internal cross partition structures
* require sixteen bytes per channel, and eight allows all of this
* interface-shared info to fit in one 128-byte cacheline.
*/
#define XPC_MEM_CHANNEL 0 /* memory channel number */
#define XPC_NET_CHANNEL 1 /* network channel number */
#define XPC_NCHANNELS 2 /* #of defined channels */
#define XPC_MAX_NCHANNELS 8 /* max #of channels allowed */
#define XPC_MAX_NCHANNELS 2 /* max #of channels allowed */
#if XPC_NCHANNELS > XPC_MAX_NCHANNELS
#error XPC_NCHANNELS exceeds MAXIMUM allowed.
#if XPC_MAX_NCHANNELS > 8
#error XPC_MAX_NCHANNELS exceeds absolute MAXIMUM possible.
#endif
/*
......@@ -254,7 +262,8 @@ enum xp_retval {
xpBteCopyError, /* 52: bte_copy() returned error */
xpSalError, /* 53: sn SAL error */
xpUnknownReason /* 54: unknown reason - must be last in enum */
xpUnsupported, /* 54: unsupported functionality or resource */
xpUnknownReason /* 55: unknown reason - must be last in enum */
};
/*
......@@ -397,8 +406,16 @@ xpc_partid_to_nasids(short partid, void *nasids)
return xpc_interface.partid_to_nasids(partid, nasids);
}
extern short xp_max_npartitions;
extern u64 xp_nofault_PIOR_target;
extern int xp_nofault_PIOR(void *);
extern int xp_error_PIOR(void);
extern struct device *xp;
extern enum xp_retval xp_init_sn2(void);
extern enum xp_retval xp_init_uv(void);
extern void xp_exit_sn2(void);
extern void xp_exit_uv(void);
#endif /* _DRIVERS_MISC_SGIXP_XP_H */
......@@ -15,28 +15,32 @@
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <asm/sn/intr.h>
#include <asm/sn/sn_sal.h>
#include <linux/device.h>
#include "xp.h"
/*
* The export of xp_nofault_PIOR needs to happen here since it is defined
* in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
* defined here.
*/
EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
/* define the XP debug device structures to be used with dev_dbg() et al */
u64 xp_nofault_PIOR_target;
EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
struct device_driver xp_dbg_name = {
.name = "xp"
};
struct device xp_dbg_subname = {
.bus_id = {0}, /* set to "" */
.driver = &xp_dbg_name
};
struct device *xp = &xp_dbg_subname;
/* max #of partitions possible */
short xp_max_npartitions;
EXPORT_SYMBOL_GPL(xp_max_npartitions);
/*
* xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level
* users of XPC.
*/
struct xpc_registration xpc_registrations[XPC_NCHANNELS];
struct xpc_registration xpc_registrations[XPC_MAX_NCHANNELS];
EXPORT_SYMBOL_GPL(xpc_registrations);
/*
......@@ -135,7 +139,7 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
{
struct xpc_registration *registration;
DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
DBUG_ON(payload_size == 0 || nentries == 0);
DBUG_ON(func == NULL);
DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit);
......@@ -185,7 +189,7 @@ xpc_disconnect(int ch_number)
{
struct xpc_registration *registration;
DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
registration = &xpc_registrations[ch_number];
......@@ -221,39 +225,21 @@ EXPORT_SYMBOL_GPL(xpc_disconnect);
int __init
xp_init(void)
{
int ret, ch_number;
u64 func_addr = *(u64 *)xp_nofault_PIOR;
u64 err_func_addr = *(u64 *)xp_error_PIOR;
if (!ia64_platform_is("sn2"))
return -ENODEV;
enum xp_retval ret;
int ch_number;
/*
* Register a nofault code region which performs a cross-partition
* PIO read. If the PIO read times out, the MCA handler will consume
* the error and return to a kernel-provided instruction to indicate
* an error. This PIO read exists because it is guaranteed to timeout
* if the destination is down (AMO operations do not timeout on at
* least some CPUs on Shubs <= v1.2, which unfortunately we have to
* work around).
*/
ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
1, 1);
if (ret != 0) {
printk(KERN_ERR "XP: can't register nofault code, error=%d\n",
ret);
}
/*
* Setup the nofault PIO read target. (There is no special reason why
* SH_IPI_ACCESS was selected.)
*/
if (is_shub2())
xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
if (is_shub())
ret = xp_init_sn2();
else if (is_uv())
ret = xp_init_uv();
else
xp_nofault_PIOR_target = SH1_IPI_ACCESS;
ret = xpUnsupported;
if (ret != xpSuccess)
return -ENODEV;
/* initialize the connection registration mutex */
for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++)
for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
mutex_init(&xpc_registrations[ch_number].mutex);
return 0;
......@@ -264,12 +250,10 @@ module_init(xp_init);
void __exit
xp_exit(void)
{
u64 func_addr = *(u64 *)xp_nofault_PIOR;
u64 err_func_addr = *(u64 *)xp_error_PIOR;
/* unregister the PIO read nofault code region */
(void)sn_register_nofault_code(func_addr, err_func_addr,
err_func_addr, 1, 0);
if (is_shub())
xp_exit_sn2();
else if (is_uv())
xp_exit_uv();
}
module_exit(xp_exit);
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
* Cross Partition (XP) sn2-based functions.
*
* Architecture specific implementation of common functions.
*/
#include <linux/device.h>
#include <asm/sn/sn_sal.h>
#include "xp.h"
/*
* The export of xp_nofault_PIOR needs to happen here since it is defined
* in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
* defined here.
*/
EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
u64 xp_nofault_PIOR_target;
EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
/*
* Register a nofault code region which performs a cross-partition PIO read.
* If the PIO read times out, the MCA handler will consume the error and
* return to a kernel-provided instruction to indicate an error. This PIO read
* exists because it is guaranteed to timeout if the destination is down
* (AMO operations do not timeout on at least some CPUs on Shubs <= v1.2,
* which unfortunately we have to work around).
*/
static enum xp_retval
xp_register_nofault_code_sn2(void)
{
int ret;
u64 func_addr;
u64 err_func_addr;
func_addr = *(u64 *)xp_nofault_PIOR;
err_func_addr = *(u64 *)xp_error_PIOR;
ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
1, 1);
if (ret != 0) {
dev_err(xp, "can't register nofault code, error=%d\n", ret);
return xpSalError;
}
/*
* Setup the nofault PIO read target. (There is no special reason why
* SH_IPI_ACCESS was selected.)
*/
if (is_shub1())
xp_nofault_PIOR_target = SH1_IPI_ACCESS;
else if (is_shub2())
xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
return xpSuccess;
}
void
xp_unregister_nofault_code_sn2(void)
{
u64 func_addr = *(u64 *)xp_nofault_PIOR;
u64 err_func_addr = *(u64 *)xp_error_PIOR;
/* unregister the PIO read nofault code region */
(void)sn_register_nofault_code(func_addr, err_func_addr,
err_func_addr, 1, 0);
}
enum xp_retval
xp_init_sn2(void)
{
BUG_ON(!is_shub());
xp_max_npartitions = XP_MAX_NPARTITIONS_SN2;
return xp_register_nofault_code_sn2();
}
void
xp_exit_sn2(void)
{
BUG_ON(!is_shub());
xp_unregister_nofault_code_sn2();
}
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
* Cross Partition (XP) uv-based functions.
*
* Architecture specific implementation of common functions.
*
*/
#include "xp.h"
enum xp_retval
xp_init_uv(void)
{
BUG_ON(!is_uv());
xp_max_npartitions = XP_MAX_NPARTITIONS_UV;
}
void
xp_exit_uv(void)
{
BUG_ON(!is_uv());
}
......@@ -210,7 +210,7 @@ xpc_disallow_hb(short partid, struct xpc_vars *vars)
* the XPC running on the remote partition).
*/
#define XPC_NOTIFY_IRQ_AMOS 0
#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_NPARTITIONS_SN2)
#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1)
......@@ -285,7 +285,7 @@ struct xpc_gp {
};
#define XPC_GP_SIZE \
L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS)
L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_MAX_NCHANNELS)
/*
* Define a structure that contains arguments associated with opening and
......@@ -300,7 +300,8 @@ struct xpc_openclose_args {
};
#define XPC_OPENCLOSE_ARGS_SIZE \
L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS)
L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * \
XPC_MAX_NCHANNELS)
/* struct xpc_msg flags */
......@@ -637,7 +638,7 @@ extern int xpc_exiting;
extern struct xpc_vars *xpc_vars;
extern struct xpc_rsvd_page *xpc_rsvd_page;
extern struct xpc_vars_part *xpc_vars_part;
extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
extern struct xpc_partition *xpc_partitions;
extern char *xpc_remote_copy_buffer;
extern void *xpc_remote_copy_buffer_base;
extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **);
......@@ -1104,13 +1105,14 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
}
/*
>>> this block comment needs to be moved and re-written.
* Memory for XPC's AMO variables is allocated by the MSPEC driver. These
* pages are located in the lowest granule. The lowest granule uses 4k pages
* for cached references and an alternate TLB handler to never provide a
* cacheable mapping for the entire region. This will prevent speculative
* reading of cached copies of our lines from being issued which will cause
* a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
* AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
* AMO variables (based on xp_max_npartitions) for message notification and an
* additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
* activation and 2 AMO variables for partition deactivation.
*/
......
......@@ -110,14 +110,14 @@ xpc_setup_infrastructure(struct xpc_partition *part)
* Allocate all of the channel structures as a contiguous chunk of
* memory.
*/
part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS,
GFP_KERNEL);
if (part->channels == NULL) {
dev_err(xpc_chan, "can't get memory for channels\n");
return xpNoMemory;
}
part->nchannels = XPC_NCHANNELS;
part->nchannels = XPC_MAX_NCHANNELS;
/* allocate all the required GET/PUT values */
......@@ -1432,9 +1432,9 @@ xpc_initiate_connect(int ch_number)
struct xpc_partition *part;
struct xpc_channel *ch;
DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (xpc_part_ref(part)) {
......@@ -1488,10 +1488,10 @@ xpc_initiate_disconnect(int ch_number)
struct xpc_partition *part;
struct xpc_channel *ch;
DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
/* initiate the channel disconnect for every active partition */
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (xpc_part_ref(part)) {
......@@ -1734,7 +1734,7 @@ xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload)
enum xp_retval ret = xpUnknownReason;
struct xpc_msg *msg = NULL;
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
*payload = NULL;
......@@ -1918,7 +1918,7 @@ xpc_initiate_send(short partid, int ch_number, void *payload)
dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
partid, ch_number);
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
DBUG_ON(msg == NULL);
......@@ -1968,7 +1968,7 @@ xpc_initiate_send_notify(short partid, int ch_number, void *payload,
dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
partid, ch_number);
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
DBUG_ON(msg == NULL);
DBUG_ON(func == NULL);
......@@ -2210,7 +2210,7 @@ xpc_initiate_received(short partid, int ch_number, void *payload)
struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
s64 get, msg_number = msg->number;
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
ch = &part->channels[ch_number];
......
......@@ -433,7 +433,7 @@ xpc_activating(void *__partid)
struct xpc_partition *part = &xpc_partitions[partid];
unsigned long irq_flags;
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
spin_lock_irqsave(&part->act_lock, irq_flags);
......@@ -544,7 +544,7 @@ xpc_notify_IRQ_handler(int irq, void *dev_id)
short partid = (short)(u64)dev_id;
struct xpc_partition *part = &xpc_partitions[partid];
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
if (xpc_part_ref(part)) {
xpc_check_for_channel_activity(part);
......@@ -815,7 +815,7 @@ xpc_disconnect_wait(int ch_number)
int wakeup_channel_mgr;
/* now wait for all callouts to the caller's function to cease */
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (!xpc_part_ref(part))
......@@ -895,7 +895,7 @@ xpc_do_exit(enum xp_retval reason)
do {
active_part_count = 0;
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (xpc_partition_disengaged(part) &&
......@@ -956,11 +956,8 @@ xpc_do_exit(enum xp_retval reason)
DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
if (reason == xpUnloading) {
/* take ourselves off of the reboot_notifier_list */
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
/* take ourselves off of the die_notifier list */
(void)unregister_die_notifier(&xpc_die_notifier);
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
}
/* close down protections for IPI operations */
......@@ -972,6 +969,7 @@ xpc_do_exit(enum xp_retval reason)
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
kfree(xpc_partitions);
kfree(xpc_remote_copy_buffer_base);
}
......@@ -1017,7 +1015,7 @@ xpc_die_disengage(void)
xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part->
......@@ -1053,7 +1051,8 @@ xpc_die_disengage(void)
time = rtc_time();
if (time >= disengage_request_timeout) {
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
for (partid = 0; partid < xp_max_npartitions;
partid++) {
if (engaged & (1UL << partid)) {
dev_info(xpc_part, "disengage from "
"remote partition %d timed "
......@@ -1132,18 +1131,26 @@ xpc_init(void)
if (!ia64_platform_is("sn2"))
return -ENODEV;
snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
buf_size = max(XPC_RP_VARS_SIZE,
XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
GFP_KERNEL,
&xpc_remote_copy_buffer_base);
if (xpc_remote_copy_buffer == NULL)
if (xpc_remote_copy_buffer == NULL) {
dev_err(xpc_part, "can't get memory for remote copy buffer\n");
return -ENOMEM;
}
snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
xpc_sysctl = register_sysctl_table(xpc_sys_dir);
xpc_partitions = kzalloc(sizeof(struct xpc_partition) *
xp_max_npartitions, GFP_KERNEL);
if (xpc_partitions == NULL) {
dev_err(xpc_part, "can't get memory for partition structure\n");
ret = -ENOMEM;
goto out_1;
}
/*
* The first few fields of each entry of xpc_partitions[] need to
......@@ -1153,7 +1160,7 @@ xpc_init(void)
* ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
* PARTITION HAS BEEN ACTIVATED.
*/
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
......@@ -1173,6 +1180,8 @@ xpc_init(void)
atomic_set(&part->references, 0);
}
xpc_sysctl = register_sysctl_table(xpc_sys_dir);
/*
* Open up protections for IPI operations (and AMO operations on
* Shub 1.1 systems).
......@@ -1196,14 +1205,8 @@ xpc_init(void)
if (ret != 0) {
dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
"errno=%d\n", -ret);
xpc_restrict_IPI_ops();
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
kfree(xpc_remote_copy_buffer_base);
return -EBUSY;
ret = -EBUSY;
goto out_2;
}
/*
......@@ -1213,16 +1216,9 @@ xpc_init(void)
*/
xpc_rsvd_page = xpc_rsvd_page_init();
if (xpc_rsvd_page == NULL) {
dev_err(xpc_part, "could not setup our reserved page\n");
free_irq(SGI_XPC_ACTIVATE, NULL);
xpc_restrict_IPI_ops();
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
kfree(xpc_remote_copy_buffer_base);
return -EBUSY;
dev_err(xpc_part, "can't setup our reserved page\n");
ret = -EBUSY;
goto out_3;
}
/* add ourselves to the reboot_notifier_list */
......@@ -1245,25 +1241,8 @@ xpc_init(void)
kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
if (IS_ERR(kthread)) {
dev_err(xpc_part, "failed while forking hb check thread\n");
/* indicate to others that our reserved page is uninitialized */
xpc_rsvd_page->vars_pa = 0;
/* take ourselves off of the reboot_notifier_list */
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
/* take ourselves off of the die_notifier list */
(void)unregister_die_notifier(&xpc_die_notifier);
del_timer_sync(&xpc_hb_timer);
free_irq(SGI_XPC_ACTIVATE, NULL);
xpc_restrict_IPI_ops();
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
kfree(xpc_remote_copy_buffer_base);
return -EBUSY;
ret = -EBUSY;
goto out_4;
}
/*
......@@ -1290,6 +1269,24 @@ xpc_init(void)
xpc_initiate_partid_to_nasids);
return 0;
/* initialization was not successful */
out_4:
/* indicate to others that our reserved page is uninitialized */
xpc_rsvd_page->vars_pa = 0;
del_timer_sync(&xpc_hb_timer);
(void)unregister_die_notifier(&xpc_die_notifier);
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
out_3:
free_irq(SGI_XPC_ACTIVATE, NULL);
out_2:
xpc_restrict_IPI_ops();
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
kfree(xpc_partitions);
out_1:
kfree(xpc_remote_copy_buffer_base);
return ret;
}
module_init(xpc_init);
......
......@@ -51,13 +51,7 @@ struct xpc_vars_part *xpc_vars_part;
static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */
static int xp_nasid_mask_words; /* actual size in words of nasid mask */
/*
* For performance reasons, each entry of xpc_partitions[] is cacheline
* aligned. And xpc_partitions[] is padded with an additional entry at the
* end so that the last legitimate entry doesn't share its cacheline with
* another variable.
*/
struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
struct xpc_partition *xpc_partitions;
/*
* Generic buffer used to store a local copy of portions of a remote
......@@ -261,7 +255,7 @@ xpc_rsvd_page_init(void)
/* clear xpc_vars_part */
memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
XP_MAX_PARTITIONS);
xp_max_npartitions);
/* initialize the activate IRQ related AMO variables */
for (i = 0; i < xp_nasid_mask_words; i++)
......@@ -408,7 +402,7 @@ xpc_check_remote_hb(void)
remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
for (partid = 0; partid < xp_max_npartitions; partid++) {
if (xpc_exiting)
break;
......@@ -487,10 +481,8 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
/* check that the partid is for another partition */
if (remote_rp->partid < 1 ||
remote_rp->partid > (XP_MAX_PARTITIONS - 1)) {
if (remote_rp->partid < 0 || remote_rp->partid >= xp_max_npartitions)
return xpInvalidPartid;
}
if (remote_rp->partid == sn_partition_id)
return xpLocalPartid;
......
......@@ -287,7 +287,7 @@ xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
{
long bp;
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
DBUG_ON(channel != XPC_NET_CHANNEL);
switch (reason) {
......@@ -513,7 +513,7 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
/*
* Main send loop.
*/
for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
for (dest_partid = 0; dp && dest_partid < xp_max_npartitions;
dest_partid++) {
if (!(dp & (1UL << (dest_partid - 1)))) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册