提交 ac935cb5 编写于 作者: L Linus Torvalds
......@@ -2169,14 +2169,10 @@ static inline void __init check_timer(void)
{
int apic1, pin1, apic2, pin2;
int vector;
unsigned int ver;
unsigned long flags;
local_irq_save(flags);
ver = apic_read(APIC_LVR);
ver = GET_APIC_VERSION(ver);
/*
* get/set the timer IRQ vector:
*/
......@@ -2189,15 +2185,11 @@ static inline void __init check_timer(void)
* mode for the 8259A whenever interrupts are routed
* through I/O APICs. Also IRQ0 has to be enabled in
* the 8259A which implies the virtual wire has to be
* disabled in the local APIC. Finally timer interrupts
* need to be acknowledged manually in the 8259A for
* timer_interrupt() and for the i82489DX when using
* the NMI watchdog.
* disabled in the local APIC.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
timer_ack = !cpu_has_tsc;
timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
timer_ack = 1;
if (timer_over_8254 > 0)
enable_8259A_irq(0);
......
......@@ -25,7 +25,6 @@
#include <asm/smp.h>
#include <asm/nmi.h>
#include <asm/timer.h>
#include "mach_traps.h"
......@@ -84,7 +83,7 @@ static int __init check_nmi_watchdog(void)
prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
if (!prev_nmi_count)
goto error;
return -1;
printk(KERN_INFO "Testing NMI watchdog ... ");
......@@ -119,7 +118,7 @@ static int __init check_nmi_watchdog(void)
if (!atomic_read(&nmi_active)) {
kfree(prev_nmi_count);
atomic_set(&nmi_active, -1);
goto error;
return -1;
}
printk("OK.\n");
......@@ -130,10 +129,6 @@ static int __init check_nmi_watchdog(void)
kfree(prev_nmi_count);
return 0;
error:
timer_ack = !cpu_has_tsc;
return -1;
}
/* This needs to happen later in boot so counters are working */
late_initcall(check_nmi_watchdog);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册