Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is just a couple of drivers (hpsa and lpfc) that got left out for
  further testing in linux-next.  We also have one fix to a prior
  submission (qla2xxx sparse)"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits)
  qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patch
  lpfc: Update lpfc version to driver version 10.2.8001.0
  lpfc: Fix ExpressLane priority setup
  lpfc: mark old devices as obsolete
  lpfc: Fix for initializing RRQ bitmap
  lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries
  lpfc: Update lpfc version to driver version 10.2.8000.0
  lpfc: Update Copyright on changed files from 8.3.45 patches
  lpfc: Update Copyright on changed files
  lpfc: Fixed locking for scsi task management commands
  lpfc: Convert runtime references to old xlane cfg param to fof cfg param
  lpfc: Fix FW dump using sysfs
  lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lock
  lpfc: Fixed kernel panic in lpfc_abort_handler
  lpfc: Fix locking for postbufq when freeing
  lpfc: Fix locking for lpfc_hba_down_post
  lpfc: Fix dynamic transitions of FirstBurst from on to off
  hpsa: fix handling of hpsa_volume_offline return value
  hpsa: return -ENOMEM not -1 on kzalloc failure in hpsa_get_device_id
  hpsa: remove messages about volume status VPD inquiry page not supported
  ...

drivers/scsi/hpsa.h

@@ -57,11 +57,12 @@ struct hpsa_scsi_dev_t {
 
 };
 
-struct reply_pool {
+struct reply_queue_buffer {
 	u64 *head;
 	size_t size;
 	u8 wraparound;
 	u32 current_entry;
+	dma_addr_t busaddr;
 };
 
 #pragma pack(1)
@@ -116,11 +117,8 @@ struct ctlr_info {
 	int 	nr_cmds; /* Number of commands allowed on this controller */
 	struct CfgTable __iomem *cfgtable;
 	int	interrupts_enabled;
-	int	major;
 	int 	max_commands;
 	int	commands_outstanding;
-	int 	max_outstanding; /* Debug */
-	int	usage_count;  /* number of opens all all minor devices */
 #	define PERF_MODE_INT	0
 #	define DOORBELL_INT	1
 #	define SIMPLE_MODE_INT	2
@@ -177,11 +175,9 @@ struct ctlr_info {
 	/*
 	 * Performant mode completion buffers
 	 */
-	u64 *reply_pool;
-	size_t reply_pool_size;
-	struct reply_pool reply_queue[MAX_REPLY_QUEUES];
+	size_t reply_queue_size;
+	struct reply_queue_buffer reply_queue[MAX_REPLY_QUEUES];
 	u8 nreply_queues;
-	dma_addr_t reply_pool_dhandle;
 	u32 *blockFetchTable;
 	u32 *ioaccel1_blockFetchTable;
 	u32 *ioaccel2_blockFetchTable;
@@ -196,7 +192,7 @@ struct ctlr_info {
 	u64 last_heartbeat_timestamp;
 	u32 heartbeat_sample_interval;
 	atomic_t firmware_flash_in_progress;
-	u32 lockup_detected;
+	u32 *lockup_detected;
 	struct delayed_work monitor_ctlr_work;
 	int remove_in_progress;
 	u32 fifo_recently_full;
@@ -233,11 +229,9 @@ struct ctlr_info {
 #define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE	(1 << 31)
 
 #define RESCAN_REQUIRED_EVENT_BITS \
-		(CTLR_STATE_CHANGE_EVENT | \
-		CTLR_ENCLOSURE_HOT_PLUG_EVENT | \
+		(CTLR_ENCLOSURE_HOT_PLUG_EVENT | \
 		CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \
 		CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \
-		CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL | \
 		CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \
 		CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE)
 	spinlock_t offline_device_lock;
@@ -346,22 +340,23 @@ struct offline_device_entry {
 static void SA5_submit_command(struct ctlr_info *h,
 	struct CommandList *c)
 {
-	dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr,
-		c->Header.Tag.lower);
 	writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 	(void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
 }
 
+static void SA5_submit_command_no_read(struct ctlr_info *h,
+	struct CommandList *c)
+{
+	writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+}
+
 static void SA5_submit_command_ioaccel2(struct ctlr_info *h,
 	struct CommandList *c)
 {
-	dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr,
-		c->Header.Tag.lower);
 	if (c->cmd_type == CMD_IOACCEL2)
 		writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
 	else
 		writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
-	(void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
 }
 
 /*
@@ -399,7 +394,7 @@ static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
 
 static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
 {
-	struct reply_pool *rq = &h->reply_queue[q];
+	struct reply_queue_buffer *rq = &h->reply_queue[q];
 	unsigned long flags, register_value = FIFO_EMPTY;
 
 	/* msi auto clears the interrupt pending bit. */
@@ -478,7 +473,6 @@ static bool SA5_intr_pending(struct ctlr_info *h)
 {
 	unsigned long register_value  =
 		readl(h->vaddr + SA5_INTR_STATUS);
-	dev_dbg(&h->pdev->dev, "intr_pending %lx\n", register_value);
 	return register_value & SA5_INTR_PENDING;
 }
 
@@ -515,7 +509,7 @@ static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h)
 static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
 {
 	u64 register_value;
-	struct reply_pool *rq = &h->reply_queue[q];
+	struct reply_queue_buffer *rq = &h->reply_queue[q];
 	unsigned long flags;
 
 	BUG_ON(q >= h->nreply_queues);
@@ -573,6 +567,14 @@ static struct access_method SA5_performant_access = {
 	SA5_performant_completed,
 };
 
+static struct access_method SA5_performant_access_no_read = {
+	SA5_submit_command_no_read,
+	SA5_performant_intr_mask,
+	SA5_fifo_full,
+	SA5_performant_intr_pending,
+	SA5_performant_completed,
+};
+
 struct board_type {
 	u32	board_id;
 	char	*product_name;

drivers/scsi/hpsa_cmd.h

@@ -151,7 +151,7 @@
 #define HPSA_VPD_HEADER_SZ              4
 
 /* Logical volume states */
-#define HPSA_VPD_LV_STATUS_UNSUPPORTED			-1
+#define HPSA_VPD_LV_STATUS_UNSUPPORTED			0xff
 #define HPSA_LV_OK                                      0x0
 #define HPSA_LV_UNDERGOING_ERASE			0x0F
 #define HPSA_LV_UNDERGOING_RPI				0x12
@@ -238,11 +238,21 @@ struct ReportLUNdata {
 	u8 LUN[HPSA_MAX_LUN][8];
 };
 
+struct ext_report_lun_entry {
+	u8 lunid[8];
+	u8 wwid[8];
+	u8 device_type;
+	u8 device_flags;
+	u8 lun_count; /* multi-lun device, how many luns */
+	u8 redundant_paths;
+	u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
+};
+
 struct ReportExtendedLUNdata {
 	u8 LUNListLength[4];
 	u8 extended_response_flag;
 	u8 reserved[3];
-	u8 LUN[HPSA_MAX_LUN][24];
+	struct ext_report_lun_entry LUN[HPSA_MAX_LUN];
 };
 
 struct SenseSubsystem_info {
@@ -375,6 +385,7 @@ struct ctlr_info; /* defined in hpsa.h */
  *        or a bus address.
  */
 
+#define COMMANDLIST_ALIGNMENT 128
 struct CommandList {
 	struct CommandListHeader Header;
 	struct RequestBlock      Request;
@@ -389,21 +400,7 @@ struct CommandList {
 	struct list_head list;
 	struct completion *waiting;
 	void   *scsi_cmd;
-
-/* on 64 bit architectures, to get this to be 32-byte-aligned
- * it so happens we need PAD_64 bytes of padding, on 32 bit systems,
- * we need PAD_32 bytes of padding (see below).   This does that.
- * If it happens that 64 bit and 32 bit systems need different
- * padding, PAD_32 and PAD_64 can be set independently, and.
- * the code below will do the right thing.
- */
-#define IS_32_BIT ((8 - sizeof(long))/4)
-#define IS_64_BIT (!IS_32_BIT)
-#define PAD_32 (40)
-#define PAD_64 (12)
-#define COMMANDLIST_PAD (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
-	u8 pad[COMMANDLIST_PAD];
-};
+} __aligned(COMMANDLIST_ALIGNMENT);
 
 /* Max S/G elements in I/O accelerator command */
 #define IOACCEL1_MAXSGENTRIES           24
@@ -413,6 +410,7 @@ struct CommandList {
  * Structure for I/O accelerator (mode 1) commands.
  * Note that this structure must be 128-byte aligned in size.
  */
+#define IOACCEL1_COMMANDLIST_ALIGNMENT 128
 struct io_accel1_cmd {
 	u16 dev_handle;			/* 0x00 - 0x01 */
 	u8  reserved1;			/* 0x02 */
@@ -440,12 +438,7 @@ struct io_accel1_cmd {
 	struct vals32 host_addr;	/* 0x70 - 0x77 */
 	u8  CISS_LUN[8];		/* 0x78 - 0x7F */
 	struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES];
-#define IOACCEL1_PAD_64 0
-#define IOACCEL1_PAD_32 0
-#define IOACCEL1_PAD (IS_32_BIT * IOACCEL1_PAD_32 + \
-			IS_64_BIT * IOACCEL1_PAD_64)
-	u8 pad[IOACCEL1_PAD];
-};
+} __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
 
 #define IOACCEL1_FUNCTION_SCSIIO        0x00
 #define IOACCEL1_SGLOFFSET              32
@@ -510,14 +503,11 @@ struct io_accel2_scsi_response {
 	u8 sense_data_buff[32];		/* sense/response data buffer */
 };
 
-#define IOACCEL2_64_PAD 76
-#define IOACCEL2_32_PAD 76
-#define IOACCEL2_PAD (IS_32_BIT * IOACCEL2_32_PAD + \
-			IS_64_BIT * IOACCEL2_64_PAD)
 /*
  * Structure for I/O accelerator (mode 2 or m2) commands.
  * Note that this structure must be 128-byte aligned in size.
  */
+#define IOACCEL2_COMMANDLIST_ALIGNMENT 128
 struct io_accel2_cmd {
 	u8  IU_type;			/* IU Type */
 	u8  direction;			/* direction, memtype, and encryption */
@@ -544,8 +534,7 @@ struct io_accel2_cmd {
 	u32 tweak_upper;		/* Encryption tweak, upper 4 bytes */
 	struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES];
 	struct io_accel2_scsi_response error_data;
-	u8 pad[IOACCEL2_PAD];
-};
+} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
 
 /*
  * defines for Mode 2 command struct
@@ -636,7 +625,7 @@ struct TransTable_struct {
 	u32            RepQCount;
 	u32            RepQCtrAddrLow32;
 	u32            RepQCtrAddrHigh32;
-#define MAX_REPLY_QUEUES 8
+#define MAX_REPLY_QUEUES 64
 	struct vals32  RepQAddr[MAX_REPLY_QUEUES];
 };
 

drivers/scsi/lpfc/lpfc.h

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -640,6 +640,7 @@ struct lpfc_hba {
 #define HBA_DEVLOSS_TMO         0x2000 /* HBA in devloss timeout */
 #define HBA_RRQ_ACTIVE		0x4000 /* process the rrq active list */
 #define HBA_FCP_IOQ_FLUSH	0x8000 /* FCP I/O queues being flushed */
+#define HBA_FW_DUMP_OP		0x10000 /* Skips fn reset before FW dump */
 	uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
 	struct lpfc_dmabuf slim2p;
 

drivers/scsi/lpfc/lpfc_attr.c

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -919,10 +919,15 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 		phba->cfg_sriov_nr_virtfn = 0;
 	}
 
+	if (opcode == LPFC_FW_DUMP)
+		phba->hba_flag |= HBA_FW_DUMP_OP;
+
 	status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
 
-	if (status != 0)
+	if (status != 0) {
+		phba->hba_flag &= ~HBA_FW_DUMP_OP;
 		return status;
+	}
 
 	/* wait for the device to be quiesced before firmware reset */
 	msleep(100);
@@ -2364,7 +2369,7 @@ lpfc_oas_tgt_store(struct device *dev, struct device_attribute *attr,
 	uint8_t wwpn[WWN_SZ];
 	int rc;
 
-	if (!phba->cfg_EnableXLane)
+	if (!phba->cfg_fof)
 		return -EPERM;
 
 	/* count may include a LF at end of string */
@@ -2432,7 +2437,7 @@ lpfc_oas_vpt_store(struct device *dev, struct device_attribute *attr,
 	uint8_t wwpn[WWN_SZ];
 	int rc;
 
-	if (!phba->cfg_EnableXLane)
+	if (!phba->cfg_fof)
 		return -EPERM;
 
 	/* count may include a LF at end of string */
@@ -2499,7 +2504,7 @@ lpfc_oas_lun_state_store(struct device *dev, struct device_attribute *attr,
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 	int val = 0;
 
-	if (!phba->cfg_EnableXLane)
+	if (!phba->cfg_fof)
 		return -EPERM;
 
 	if (!isdigit(buf[0]))
@@ -2565,7 +2570,7 @@ lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
 
 	int rc = 0;
 
-	if (!phba->cfg_EnableXLane)
+	if (!phba->cfg_fof)
 		return -EPERM;
 
 	if (oas_state) {
@@ -2670,7 +2675,7 @@ lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr,
 	uint64_t oas_lun;
 	int len = 0;
 
-	if (!phba->cfg_EnableXLane)
+	if (!phba->cfg_fof)
 		return -EPERM;
 
 	if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)
@@ -2716,7 +2721,7 @@ lpfc_oas_lun_store(struct device *dev, struct device_attribute *attr,
 	uint64_t scsi_lun;
 	ssize_t rc;
 
-	if (!phba->cfg_EnableXLane)
+	if (!phba->cfg_fof)
 		return -EPERM;
 
 	if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)
@@ -4655,7 +4660,7 @@ LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enable Express Lane Feature.");
 #       0x0 - 0x7f  = CS_CTL field in FC header (high 7 bits)
 # Value range is [0x0,0x7f]. Default value is 0
 */
-LPFC_ATTR_R(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");
+LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");
 
 /*
 # lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF)

drivers/scsi/lpfc/lpfc_bsg.c

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2009-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2009-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *

drivers/scsi/lpfc/lpfc_bsg.h

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2010-2012 Emulex.  All rights reserved.                *
+ * Copyright (C) 2010-2014 Emulex.  All rights reserved.                *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *

drivers/scsi/lpfc/lpfc_crtn.h

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -289,6 +289,7 @@ int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
 void lpfc_sli_bemem_bcopy(void *, void *, uint32_t);
 void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
+void lpfc_sli_abort_fcp_rings(struct lpfc_hba *phba);
 void lpfc_sli_hba_iocb_abort(struct lpfc_hba *);
 void lpfc_sli_flush_fcp_rings(struct lpfc_hba *);
 int lpfc_sli_ringpostbuf_put(struct lpfc_hba *, struct lpfc_sli_ring *,
@@ -310,6 +311,9 @@ int lpfc_sli_issue_abort_iotag(struct lpfc_hba *, struct lpfc_sli_ring *,
 int lpfc_sli_sum_iocb(struct lpfc_vport *, uint16_t, uint64_t, lpfc_ctx_cmd);
 int lpfc_sli_abort_iocb(struct lpfc_vport *, struct lpfc_sli_ring *, uint16_t,
 			uint64_t, lpfc_ctx_cmd);
+int
+lpfc_sli_abort_taskmgmt(struct lpfc_vport *, struct lpfc_sli_ring *,
+			uint16_t, uint64_t, lpfc_ctx_cmd);
 
 void lpfc_mbox_timeout(unsigned long);
 void lpfc_mbox_timeout_handler(struct lpfc_hba *);

drivers/scsi/lpfc/lpfc_debugfs.c

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2007-2012 Emulex.  All rights reserved.           *
+ * Copyright (C) 2007-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -2314,7 +2314,7 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
 			goto too_big;
 	}
 
-	if (phba->cfg_EnableXLane) {
+	if (phba->cfg_fof) {
 
 		/* OAS CQ */
 		qp = phba->sli4_hba.oas_cq;

drivers/scsi/lpfc/lpfc_els.c

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *

drivers/scsi/lpfc/lpfc_hbadisc.c

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -5634,6 +5634,9 @@ lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		ndlp->active_rrqs_xri_bitmap =
 				mempool_alloc(vport->phba->active_rrq_pool,
 					      GFP_KERNEL);
+		if (ndlp->active_rrqs_xri_bitmap)
+			memset(ndlp->active_rrqs_xri_bitmap, 0,
+			       ndlp->phba->cfg_rrq_xri_bitmap_sz);
 	}
 
 

drivers/scsi/lpfc/lpfc_hw.h

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *

drivers/scsi/lpfc/lpfc_hw4.h

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2009-2013 Emulex.  All rights reserved.                *
+ * Copyright (C) 2009-2014 Emulex.  All rights reserved.                *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *

drivers/scsi/lpfc/lpfc_init.c

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -820,57 +820,153 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
+ * lpfc_sli4_free_sp_events - Cleanup sp_queue_events to free
+ * rspiocb which got deferred
+ *
  * @phba: pointer to lpfc HBA data structure.
  *
- * This routine will do uninitialization after the HBA is reset when bring
- * down the SLI Layer.
+ * This routine will cleanup completed slow path events after HBA is reset
+ * when bringing down the SLI Layer.
+ *
  *
  * Return codes
- *   0 - success.
- *   Any other value - error.
+ *   void.
  **/
-static int
-lpfc_hba_down_post_s3(struct lpfc_hba *phba)
+static void
+lpfc_sli4_free_sp_events(struct lpfc_hba *phba)
+{
+	struct lpfc_iocbq *rspiocbq;
+	struct hbq_dmabuf *dmabuf;
+	struct lpfc_cq_event *cq_event;
+
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~HBA_SP_QUEUE_EVT;
+	spin_unlock_irq(&phba->hbalock);
+
+	while (!list_empty(&phba->sli4_hba.sp_queue_event)) {
+		/* Get the response iocb from the head of work queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_queue_event,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+
+		switch (bf_get(lpfc_wcqe_c_code, &cq_event->cqe.wcqe_cmpl)) {
+		case CQE_CODE_COMPL_WQE:
+			rspiocbq = container_of(cq_event, struct lpfc_iocbq,
+						 cq_event);
+			lpfc_sli_release_iocbq(phba, rspiocbq);
+			break;
+		case CQE_CODE_RECEIVE:
+		case CQE_CODE_RECEIVE_V1:
+			dmabuf = container_of(cq_event, struct hbq_dmabuf,
+					      cq_event);
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+		}
+	}
+}
+
+/**
+ * lpfc_hba_free_post_buf - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will cleanup posted ELS buffers after the HBA is reset
+ * when bringing down the SLI Layer.
+ *
+ *
+ * Return codes
+ *   void.
+ **/
+static void
+lpfc_hba_free_post_buf(struct lpfc_hba *phba)
 {
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
 	struct lpfc_dmabuf *mp, *next_mp;
-	LIST_HEAD(completions);
-	int i;
+	LIST_HEAD(buflist);
+	int count;
 
 	if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
 		lpfc_sli_hbqbuf_free_all(phba);
 	else {
 		/* Cleanup preposted buffers on the ELS ring */
 		pring = &psli->ring[LPFC_ELS_RING];
-		list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
+		spin_lock_irq(&phba->hbalock);
+		list_splice_init(&pring->postbufq, &buflist);
+		spin_unlock_irq(&phba->hbalock);
+
+		count = 0;
+		list_for_each_entry_safe(mp, next_mp, &buflist, list) {
 			list_del(&mp->list);
-			pring->postbufq_cnt--;
+			count++;
 			lpfc_mbuf_free(phba, mp->virt, mp->phys);
 			kfree(mp);
 		}
+
+		spin_lock_irq(&phba->hbalock);
+		pring->postbufq_cnt -= count;
+		spin_unlock_irq(&phba->hbalock);
 	}
+}
+
+/**
+ * lpfc_hba_clean_txcmplq - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will cleanup the txcmplq after the HBA is reset when bringing
+ * down the SLI Layer.
+ *
+ * Return codes
+ *   void
+ **/
+static void
+lpfc_hba_clean_txcmplq(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_sli_ring *pring;
+	LIST_HEAD(completions);
+	int i;
 
-	spin_lock_irq(&phba->hbalock);
 	for (i = 0; i < psli->num_rings; i++) {
 		pring = &psli->ring[i];
-
+		if (phba->sli_rev >= LPFC_SLI_REV4)
+			spin_lock_irq(&pring->ring_lock);
+		else
+			spin_lock_irq(&phba->hbalock);
 		/* At this point in time the HBA is either reset or DOA. Either
 		 * way, nothing should be on txcmplq as it will NEVER complete.
 		 */
 		list_splice_init(&pring->txcmplq, &completions);
-		spin_unlock_irq(&phba->hbalock);
+		pring->txcmplq_cnt = 0;
+
+		if (phba->sli_rev >= LPFC_SLI_REV4)
+			spin_unlock_irq(&pring->ring_lock);
+		else
+			spin_unlock_irq(&phba->hbalock);
 
 		/* Cancel all the IOCBs from the completions list */
 		lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
 				      IOERR_SLI_ABORTED);
-
 		lpfc_sli_abort_iocb_ring(phba, pring);
-		spin_lock_irq(&phba->hbalock);
 	}
-	spin_unlock_irq(&phba->hbalock);
+}
 
+/**
+ * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
+	int i;
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will do uninitialization after the HBA is reset when bring
+ * down the SLI Layer.
+ *
+ * Return codes
+ *   0 - success.
+ *   Any other value - error.
+ **/
+static int
+lpfc_hba_down_post_s3(struct lpfc_hba *phba)
+{
+	lpfc_hba_free_post_buf(phba);
+	lpfc_hba_clean_txcmplq(phba);
 	return 0;
 }
 
@@ -890,13 +986,12 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
 {
 	struct lpfc_scsi_buf *psb, *psb_next;
 	LIST_HEAD(aborts);
-	int ret;
 	unsigned long iflag = 0;
 	struct lpfc_sglq *sglq_entry = NULL;
 
-	ret = lpfc_hba_down_post_s3(phba);
-	if (ret)
-		return ret;
+	lpfc_hba_free_post_buf(phba);
+	lpfc_hba_clean_txcmplq(phba);
+
 	/* At this point in time the HBA is either reset or DOA. Either
 	 * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
 	 * on the lpfc_sgl_list so that it can either be freed if the
@@ -932,6 +1027,8 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
 	spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
 	list_splice(&aborts, &phba->lpfc_scsi_buf_list_put);
 	spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
+
+	lpfc_sli4_free_sp_events(phba);
 	return 0;
 }
 
@@ -1250,7 +1347,6 @@ static void
 lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 {
 	uint32_t old_host_status = phba->work_hs;
-	struct lpfc_sli_ring  *pring;
 	struct lpfc_sli *psli = &phba->sli;
 
 	/* If the pci channel is offline, ignore possible errors,
@@ -1279,8 +1375,7 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 	 * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
 	 * SCSI layer retry it after re-establishing link.
 	 */
-	pring = &psli->ring[psli->fcp_ring];
-	lpfc_sli_abort_iocb_ring(phba, pring);
+	lpfc_sli_abort_fcp_rings(phba);
 
 	/*
 	 * There was a firmware error. Take the hba offline and then
@@ -1348,7 +1443,6 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba)
 {
 	struct lpfc_vport *vport = phba->pport;
 	struct lpfc_sli   *psli = &phba->sli;
-	struct lpfc_sli_ring  *pring;
 	uint32_t event_data;
 	unsigned long temperature;
 	struct temp_event temp_event_data;
@@ -1400,8 +1494,7 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba)
 		* Error iocb (I/O) on txcmplq and let the SCSI layer
 		* retry it after re-establishing link.
 		*/
-		pring = &psli->ring[psli->fcp_ring];
-		lpfc_sli_abort_iocb_ring(phba, pring);
+		lpfc_sli_abort_fcp_rings(phba);
 
 		/*
 		 * There was a firmware error.  Take the hba offline and then
@@ -1940,78 +2033,81 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 
 	switch (dev_id) {
 	case PCI_DEVICE_ID_FIREFLY:
-		m = (typeof(m)){"LP6000", "PCI", "Fibre Channel Adapter"};
+		m = (typeof(m)){"LP6000", "PCI",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_SUPERFLY:
 		if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
-			m = (typeof(m)){"LP7000", "PCI",
-					"Fibre Channel Adapter"};
+			m = (typeof(m)){"LP7000", "PCI", ""};
 		else
-			m = (typeof(m)){"LP7000E", "PCI",
-					"Fibre Channel Adapter"};
+			m = (typeof(m)){"LP7000E", "PCI", ""};
+		m.function = "Obsolete, Unsupported Fibre Channel Adapter";
 		break;
 	case PCI_DEVICE_ID_DRAGONFLY:
 		m = (typeof(m)){"LP8000", "PCI",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_CENTAUR:
 		if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
-			m = (typeof(m)){"LP9002", "PCI",
-					"Fibre Channel Adapter"};
+			m = (typeof(m)){"LP9002", "PCI", ""};
 		else
-			m = (typeof(m)){"LP9000", "PCI",
-					"Fibre Channel Adapter"};
+			m = (typeof(m)){"LP9000", "PCI", ""};
+		m.function = "Obsolete, Unsupported Fibre Channel Adapter";
 		break;
 	case PCI_DEVICE_ID_RFLY:
 		m = (typeof(m)){"LP952", "PCI",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_PEGASUS:
 		m = (typeof(m)){"LP9802", "PCI-X",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_THOR:
 		m = (typeof(m)){"LP10000", "PCI-X",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_VIPER:
 		m = (typeof(m)){"LPX1000",  "PCI-X",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_PFLY:
 		m = (typeof(m)){"LP982", "PCI-X",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_TFLY:
 		m = (typeof(m)){"LP1050", "PCI-X",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_HELIOS:
 		m = (typeof(m)){"LP11000", "PCI-X2",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_HELIOS_SCSP:
 		m = (typeof(m)){"LP11000-SP", "PCI-X2",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_HELIOS_DCSP:
 		m = (typeof(m)){"LP11002-SP",  "PCI-X2",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_NEPTUNE:
-		m = (typeof(m)){"LPe1000", "PCIe", "Fibre Channel Adapter"};
+		m = (typeof(m)){"LPe1000", "PCIe",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_NEPTUNE_SCSP:
-		m = (typeof(m)){"LPe1000-SP", "PCIe", "Fibre Channel Adapter"};
+		m = (typeof(m)){"LPe1000-SP", "PCIe",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_NEPTUNE_DCSP:
-		m = (typeof(m)){"LPe1002-SP", "PCIe", "Fibre Channel Adapter"};
+		m = (typeof(m)){"LPe1002-SP", "PCIe",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_BMID:
 		m = (typeof(m)){"LP1150", "PCI-X2", "Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_BSMB:
-		m = (typeof(m)){"LP111", "PCI-X2", "Fibre Channel Adapter"};
+		m = (typeof(m)){"LP111", "PCI-X2",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_ZEPHYR:
 		m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
@@ -2030,16 +2126,20 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 		m = (typeof(m)){"LPe111", "PCIe", "Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_LP101:
-		m = (typeof(m)){"LP101", "PCI-X", "Fibre Channel Adapter"};
+		m = (typeof(m)){"LP101", "PCI-X",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_LP10000S:
-		m = (typeof(m)){"LP10000-S", "PCI", "Fibre Channel Adapter"};
+		m = (typeof(m)){"LP10000-S", "PCI",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_LP11000S:
-		m = (typeof(m)){"LP11000-S", "PCI-X2", "Fibre Channel Adapter"};
+		m = (typeof(m)){"LP11000-S", "PCI-X2",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_LPE11000S:
-		m = (typeof(m)){"LPe11000-S", "PCIe", "Fibre Channel Adapter"};
+		m = (typeof(m)){"LPe11000-S", "PCIe",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_SAT:
 		m = (typeof(m)){"LPe12000", "PCIe", "Fibre Channel Adapter"};
@@ -2060,20 +2160,21 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 		m = (typeof(m)){"LPe12000-S", "PCIe", "Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_HORNET:
-		m = (typeof(m)){"LP21000", "PCIe", "FCoE Adapter"};
+		m = (typeof(m)){"LP21000", "PCIe",
+				"Obsolete, Unsupported FCoE Adapter"};
 		GE = 1;
 		break;
 	case PCI_DEVICE_ID_PROTEUS_VF:
 		m = (typeof(m)){"LPev12000", "PCIe IOV",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_PROTEUS_PF:
 		m = (typeof(m)){"LPev12000", "PCIe IOV",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_PROTEUS_S:
 		m = (typeof(m)){"LPemv12002-S", "PCIe IOV",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_TIGERSHARK:
 		oneConnect = 1;
@@ -2089,17 +2190,24 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 		break;
 	case PCI_DEVICE_ID_BALIUS:
 		m = (typeof(m)){"LPVe12002", "PCIe Shared I/O",
-				"Fibre Channel Adapter"};
+				"Obsolete, Unsupported Fibre Channel Adapter"};
 		break;
 	case PCI_DEVICE_ID_LANCER_FC:
-	case PCI_DEVICE_ID_LANCER_FC_VF:
 		m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"};
 		break;
+	case PCI_DEVICE_ID_LANCER_FC_VF:
+		m = (typeof(m)){"LPe16000", "PCIe",
+				"Obsolete, Unsupported Fibre Channel Adapter"};
+		break;
 	case PCI_DEVICE_ID_LANCER_FCOE:
-	case PCI_DEVICE_ID_LANCER_FCOE_VF:
 		oneConnect = 1;
 		m = (typeof(m)){"OCe15100", "PCIe", "FCoE"};
 		break;
+	case PCI_DEVICE_ID_LANCER_FCOE_VF:
+		oneConnect = 1;
+		m = (typeof(m)){"OCe15100", "PCIe",
+				"Obsolete, Unsupported FCoE"};
+		break;
 	case PCI_DEVICE_ID_SKYHAWK:
 	case PCI_DEVICE_ID_SKYHAWK_VF:
 		oneConnect = 1;
@@ -4614,7 +4722,10 @@ lpfc_reset_hba(struct lpfc_hba *phba)
 		phba->link_state = LPFC_HBA_ERROR;
 		return;
 	}
-	lpfc_offline_prep(phba, LPFC_MBX_WAIT);
+	if (phba->sli.sli_flag & LPFC_SLI_ACTIVE)
+		lpfc_offline_prep(phba, LPFC_MBX_WAIT);
+	else
+		lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
 	lpfc_offline(phba);
 	lpfc_sli_brdrestart(phba);
 	lpfc_online(phba);
@@ -9663,9 +9774,6 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev)
 static void
 lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
 {
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring  *pring;
-
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			"2723 PCI channel I/O abort preparing for recovery\n");
 
@@ -9673,8 +9781,7 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
 	 * There may be errored I/Os through HBA, abort all I/Os on txcmplq
 	 * and let the SCSI mid-layer to retry them to recover.
 	 */
-	pring = &psli->ring[psli->fcp_ring];
-	lpfc_sli_abort_iocb_ring(phba, pring);
+	lpfc_sli_abort_fcp_rings(phba);
 }
 
 /**
@@ -10417,17 +10524,13 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev)
 static void
 lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba)
 {
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring  *pring;
-
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			"2828 PCI channel I/O abort preparing for recovery\n");
 	/*
 	 * There may be errored I/Os through HBA, abort all I/Os on txcmplq
 	 * and let the SCSI mid-layer to retry them to recover.
 	 */
-	pring = &psli->ring[psli->fcp_ring];
-	lpfc_sli_abort_iocb_ring(phba, pring);
+	lpfc_sli_abort_fcp_rings(phba);
 }
 
 /**
@@ -10898,7 +11001,7 @@ lpfc_sli4_oas_verify(struct lpfc_hba *phba)
 	if (phba->sli4_hba.pc_sli4_params.oas_supported) {
 		phba->cfg_fof = 1;
 	} else {
-		phba->cfg_EnableXLane = 0;
+		phba->cfg_fof = 0;
 		if (phba->device_data_mem_pool)
 			mempool_destroy(phba->device_data_mem_pool);
 		phba->device_data_mem_pool = NULL;
@@ -10928,7 +11031,7 @@ lpfc_fof_queue_setup(struct lpfc_hba *phba)
 	if (rc)
 		return -ENOMEM;
 
-	if (phba->cfg_EnableXLane) {
+	if (phba->cfg_fof) {
 
 		rc = lpfc_cq_create(phba, phba->sli4_hba.oas_cq,
 				    phba->sli4_hba.fof_eq, LPFC_WCQ, LPFC_FCP);
@@ -10947,8 +11050,7 @@ lpfc_fof_queue_setup(struct lpfc_hba *phba)
 	return 0;
 
 out_oas_wq:
-	if (phba->cfg_EnableXLane)
-		lpfc_cq_destroy(phba, phba->sli4_hba.oas_cq);
+	lpfc_cq_destroy(phba, phba->sli4_hba.oas_cq);
 out_oas_cq:
 	lpfc_eq_destroy(phba, phba->sli4_hba.fof_eq);
 	return rc;
@@ -10982,7 +11084,7 @@ lpfc_fof_queue_create(struct lpfc_hba *phba)
 
 	phba->sli4_hba.fof_eq = qdesc;
 
-	if (phba->cfg_EnableXLane) {
+	if (phba->cfg_fof) {
 
 		/* Create OAS CQ */
 		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,

drivers/scsi/lpfc/lpfc_mem.c

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *

drivers/scsi/lpfc/lpfc_scsi.c

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -73,7 +73,7 @@ lpfc_rport_data_from_scsi_device(struct scsi_device *sdev)
 {
 	struct lpfc_vport *vport = (struct lpfc_vport *)sdev->host->hostdata;
 
-	if (vport->phba->cfg_EnableXLane)
+	if (vport->phba->cfg_fof)
 		return ((struct lpfc_device_data *)sdev->hostdata)->rport_data;
 	else
 		return (struct lpfc_rport_data *)sdev->hostdata;
@@ -3462,7 +3462,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 	 * If the OAS driver feature is enabled and the lun is enabled for
 	 * OAS, set the oas iocb related flags.
 	 */
-	if ((phba->cfg_EnableXLane) && ((struct lpfc_device_data *)
+	if ((phba->cfg_fof) && ((struct lpfc_device_data *)
 		scsi_cmnd->device->hostdata)->oas_enabled)
 		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_OAS;
 	return 0;
@@ -4314,6 +4314,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 		fcp_cmnd->fcpCntl1 = SIMPLE_Q;
 
 	sli4 = (phba->sli_rev == LPFC_SLI_REV4);
+	piocbq->iocb.un.fcpi.fcpi_XRdy = 0;
 
 	/*
 	 * There are three possibilities here - use scatter-gather segment, use
@@ -4782,7 +4783,9 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	struct lpfc_scsi_buf *lpfc_cmd;
 	IOCB_t *cmd, *icmd;
 	int ret = SUCCESS, status = 0;
-	unsigned long flags;
+	struct lpfc_sli_ring *pring_s4;
+	int ring_number, ret_val;
+	unsigned long flags, iflags;
 	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
 
 	status = fc_block_scsi_eh(cmnd);
@@ -4833,6 +4836,14 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 
 	BUG_ON(iocb->context1 != lpfc_cmd);
 
+	/* abort issued in recovery is still in progress */
+	if (iocb->iocb_flag & LPFC_DRIVER_ABORTED) {
+		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+			 "3389 SCSI Layer I/O Abort Request is pending\n");
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		goto wait_for_cmpl;
+	}
+
 	abtsiocb = __lpfc_sli_get_iocbq(phba);
 	if (abtsiocb == NULL) {
 		ret = FAILED;
@@ -4871,11 +4882,23 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 
 	abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
 	abtsiocb->vport = vport;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		ring_number = MAX_SLI3_CONFIGURED_RINGS + iocb->fcp_wqidx;
+		pring_s4 = &phba->sli.ring[ring_number];
+		/* Note: both hbalock and ring_lock must be set here */
+		spin_lock_irqsave(&pring_s4->ring_lock, iflags);
+		ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno,
+						abtsiocb, 0);
+		spin_unlock_irqrestore(&pring_s4->ring_lock, iflags);
+	} else {
+		ret_val = __lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
+						abtsiocb, 0);
+	}
 	/* no longer need the lock after this point */
 	spin_unlock_irqrestore(&phba->hbalock, flags);
 
-	if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
-	    IOCB_ERROR) {
+
+	if (ret_val == IOCB_ERROR) {
 		lpfc_sli_release_iocbq(phba, abtsiocb);
 		ret = FAILED;
 		goto out;
@@ -4885,12 +4908,16 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 		lpfc_sli_handle_fast_ring_event(phba,
 			&phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
 
+wait_for_cmpl:
 	lpfc_cmd->waitq = &waitq;
 	/* Wait for abort to complete */
 	wait_event_timeout(waitq,
 			  (lpfc_cmd->pCmd != cmnd),
 			   msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000));
+
+	spin_lock_irqsave(shost->host_lock, flags);
 	lpfc_cmd->waitq = NULL;
+	spin_unlock_irqrestore(shost->host_lock, flags);
 
 	if (lpfc_cmd->pCmd == cmnd) {
 		ret = FAILED;
@@ -5172,8 +5199,9 @@ lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
 
 	cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
 	if (cnt)
-		lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
-				    tgt_id, lun_id, context);
+		lpfc_sli_abort_taskmgmt(vport,
+					&phba->sli.ring[phba->sli.fcp_ring],
+					tgt_id, lun_id, context);
 	later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
 	while (time_after(later, jiffies) && cnt) {
 		schedule_timeout_uninterruptible(msecs_to_jiffies(20));
@@ -5491,7 +5519,7 @@ lpfc_slave_alloc(struct scsi_device *sdev)
 	if (!rport || fc_remote_port_chkready(rport))
 		return -ENXIO;
 
-	if (phba->cfg_EnableXLane) {
+	if (phba->cfg_fof) {
 
 		/*
 		 * Check to see if the device data structure for the lun
@@ -5616,7 +5644,7 @@ lpfc_slave_destroy(struct scsi_device *sdev)
 	struct lpfc_device_data *device_data = sdev->hostdata;
 
 	atomic_dec(&phba->sdev_cnt);
-	if ((phba->cfg_EnableXLane) && (device_data)) {
+	if ((phba->cfg_fof) && (device_data)) {
 		spin_lock_irqsave(&phba->devicelock, flags);
 		device_data->available = false;
 		if (!device_data->oas_enabled)
@@ -5655,7 +5683,7 @@ lpfc_create_device_data(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 	int memory_flags;
 
 	if (unlikely(!phba) || !vport_wwpn || !target_wwpn  ||
-	    !(phba->cfg_EnableXLane))
+	    !(phba->cfg_fof))
 		return NULL;
 
 	/* Attempt to create the device data to contain lun info */
@@ -5693,7 +5721,7 @@ lpfc_delete_device_data(struct lpfc_hba *phba,
 {
 
 	if (unlikely(!phba) || !lun_info  ||
-	    !(phba->cfg_EnableXLane))
+	    !(phba->cfg_fof))
 		return;
 
 	if (!list_empty(&lun_info->listentry))
@@ -5727,7 +5755,7 @@ __lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list,
 	struct lpfc_device_data *lun_info;
 
 	if (unlikely(!phba) || !list || !vport_wwpn || !target_wwpn ||
-	    !phba->cfg_EnableXLane)
+	    !phba->cfg_fof)
 		return NULL;
 
 	/* Check to see if the lun is already enabled for OAS. */
@@ -5789,7 +5817,7 @@ lpfc_find_next_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 	    !starting_lun || !found_vport_wwpn ||
 	    !found_target_wwpn || !found_lun || !found_lun_status ||
 	    (*starting_lun == NO_MORE_OAS_LUN) ||
-	    !phba->cfg_EnableXLane)
+	    !phba->cfg_fof)
 		return false;
 
 	lun = *starting_lun;
@@ -5873,7 +5901,7 @@ lpfc_enable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 	unsigned long flags;
 
 	if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
-	    !phba->cfg_EnableXLane)
+	    !phba->cfg_fof)
 		return false;
 
 	spin_lock_irqsave(&phba->devicelock, flags);
@@ -5930,7 +5958,7 @@ lpfc_disable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 	unsigned long flags;
 
 	if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
-	    !phba->cfg_EnableXLane)
+	    !phba->cfg_fof)
 		return false;
 
 	spin_lock_irqsave(&phba->devicelock, flags);

drivers/scsi/lpfc/lpfc_scsi.h

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *

drivers/scsi/lpfc/lpfc_sli.c

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -3532,20 +3532,63 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 	/* Error everything on txq and txcmplq
 	 * First do the txq.
 	 */
-	spin_lock_irq(&phba->hbalock);
-	list_splice_init(&pring->txq, &completions);
+	if (phba->sli_rev >= LPFC_SLI_REV4) {
+		spin_lock_irq(&pring->ring_lock);
+		list_splice_init(&pring->txq, &completions);
+		pring->txq_cnt = 0;
+		spin_unlock_irq(&pring->ring_lock);
 
-	/* Next issue ABTS for everything on the txcmplq */
-	list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
-		lpfc_sli_issue_abort_iotag(phba, pring, iocb);
+		spin_lock_irq(&phba->hbalock);
+		/* Next issue ABTS for everything on the txcmplq */
+		list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
+			lpfc_sli_issue_abort_iotag(phba, pring, iocb);
+		spin_unlock_irq(&phba->hbalock);
+	} else {
+		spin_lock_irq(&phba->hbalock);
+		list_splice_init(&pring->txq, &completions);
+		pring->txq_cnt = 0;
 
-	spin_unlock_irq(&phba->hbalock);
+		/* Next issue ABTS for everything on the txcmplq */
+		list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
+			lpfc_sli_issue_abort_iotag(phba, pring, iocb);
+		spin_unlock_irq(&phba->hbalock);
+	}
 
 	/* Cancel all the IOCBs from the completions list */
 	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
 			      IOERR_SLI_ABORTED);
 }
 
+/**
+ * lpfc_sli_abort_fcp_rings - Abort all iocbs in all FCP rings
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function aborts all iocbs in FCP rings and frees all the iocb
+ * objects in txq. This function issues an abort iocb for all the iocb commands
+ * in txcmplq. The iocbs in the txcmplq is not guaranteed to complete before
+ * the return of this function. The caller is not required to hold any locks.
+ **/
+void
+lpfc_sli_abort_fcp_rings(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_sli_ring  *pring;
+	uint32_t i;
+
+	/* Look on all the FCP Rings for the iotag */
+	if (phba->sli_rev >= LPFC_SLI_REV4) {
+		for (i = 0; i < phba->cfg_fcp_io_channel; i++) {
+			pring = &psli->ring[i + MAX_SLI3_CONFIGURED_RINGS];
+			lpfc_sli_abort_iocb_ring(phba, pring);
+		}
+	} else {
+		pring = &psli->ring[psli->fcp_ring];
+		lpfc_sli_abort_iocb_ring(phba, pring);
+	}
+}
+
+
 /**
  * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring
  * @phba: Pointer to HBA context object.
@@ -3563,28 +3606,55 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
 	LIST_HEAD(txcmplq);
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring  *pring;
-
-	/* Currently, only one fcp ring */
-	pring = &psli->ring[psli->fcp_ring];
+	uint32_t i;
 
 	spin_lock_irq(&phba->hbalock);
-	/* Retrieve everything on txq */
-	list_splice_init(&pring->txq, &txq);
-
-	/* Retrieve everything on the txcmplq */
-	list_splice_init(&pring->txcmplq, &txcmplq);
-
 	/* Indicate the I/O queues are flushed */
 	phba->hba_flag |= HBA_FCP_IOQ_FLUSH;
 	spin_unlock_irq(&phba->hbalock);
 
-	/* Flush the txq */
-	lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
-			      IOERR_SLI_DOWN);
+	/* Look on all the FCP Rings for the iotag */
+	if (phba->sli_rev >= LPFC_SLI_REV4) {
+		for (i = 0; i < phba->cfg_fcp_io_channel; i++) {
+			pring = &psli->ring[i + MAX_SLI3_CONFIGURED_RINGS];
+
+			spin_lock_irq(&pring->ring_lock);
+			/* Retrieve everything on txq */
+			list_splice_init(&pring->txq, &txq);
+			/* Retrieve everything on the txcmplq */
+			list_splice_init(&pring->txcmplq, &txcmplq);
+			pring->txq_cnt = 0;
+			pring->txcmplq_cnt = 0;
+			spin_unlock_irq(&pring->ring_lock);
+
+			/* Flush the txq */
+			lpfc_sli_cancel_iocbs(phba, &txq,
+					      IOSTAT_LOCAL_REJECT,
+					      IOERR_SLI_DOWN);
+			/* Flush the txcmpq */
+			lpfc_sli_cancel_iocbs(phba, &txcmplq,
+					      IOSTAT_LOCAL_REJECT,
+					      IOERR_SLI_DOWN);
+		}
+	} else {
+		pring = &psli->ring[psli->fcp_ring];
 
-	/* Flush the txcmpq */
-	lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
-			      IOERR_SLI_DOWN);
+		spin_lock_irq(&phba->hbalock);
+		/* Retrieve everything on txq */
+		list_splice_init(&pring->txq, &txq);
+		/* Retrieve everything on the txcmplq */
+		list_splice_init(&pring->txcmplq, &txcmplq);
+		pring->txq_cnt = 0;
+		pring->txcmplq_cnt = 0;
+		spin_unlock_irq(&phba->hbalock);
+
+		/* Flush the txq */
+		lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
+				      IOERR_SLI_DOWN);
+		/* Flush the txcmpq */
+		lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
+				      IOERR_SLI_DOWN);
+	}
 }
 
 /**
@@ -3987,12 +4057,13 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
 {
 	struct lpfc_sli *psli = &phba->sli;
 	uint16_t cfg_value;
-	int rc;
+	int rc = 0;
 
 	/* Reset HBA */
 	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
-			"0295 Reset HBA Data: x%x x%x\n",
-			phba->pport->port_state, psli->sli_flag);
+			"0295 Reset HBA Data: x%x x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag,
+			phba->hba_flag);
 
 	/* perform board reset */
 	phba->fc_eventTag = 0;
@@ -4005,6 +4076,12 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
 	phba->fcf.fcf_flag = 0;
 	spin_unlock_irq(&phba->hbalock);
 
+	/* SLI4 INTF 2: if FW dump is being taken skip INIT_PORT */
+	if (phba->hba_flag & HBA_FW_DUMP_OP) {
+		phba->hba_flag &= ~HBA_FW_DUMP_OP;
+		return rc;
+	}
+
 	/* Now physically reset the device */
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 			"0389 Performing PCI function reset!\n");
@@ -5002,7 +5079,7 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
 		} while (++fcp_eqidx < phba->cfg_fcp_io_channel);
 	}
 
-	if (phba->cfg_EnableXLane)
+	if (phba->cfg_fof)
 		lpfc_sli4_cq_release(phba->sli4_hba.oas_cq, LPFC_QUEUE_REARM);
 
 	if (phba->sli4_hba.hba_eq) {
@@ -6722,7 +6799,6 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 	LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
 	MAILBOX_t *mb = &pmbox->u.mb;
 	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring;
 
 	/* If the mailbox completed, process the completion and return */
 	if (lpfc_sli4_process_missed_mbox_completions(phba))
@@ -6764,8 +6840,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
-	pring = &psli->ring[psli->fcp_ring];
-	lpfc_sli_abort_iocb_ring(phba, pring);
+	lpfc_sli_abort_fcp_rings(phba);
 
 	lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 			"0345 Resetting board due to mailbox timeout\n");
@@ -8133,6 +8208,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 	abort_tag = (uint32_t) iocbq->iotag;
 	xritag = iocbq->sli4_xritag;
 	wqe->generic.wqe_com.word7 = 0; /* The ct field has moved so reset */
+	wqe->generic.wqe_com.word10 = 0;
 	/* words0-2 bpl convert bde */
 	if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
 		numBdes = iocbq->iocb.un.genreq64.bdl.bdeSize /
@@ -8639,8 +8715,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
 
 	if ((piocb->iocb_flag & LPFC_IO_FCP) ||
 	    (piocb->iocb_flag & LPFC_USE_FCPWQIDX)) {
-		if (!phba->cfg_EnableXLane || (!(piocb->iocb_flag &
-			LPFC_IO_OAS))) {
+		if (!phba->cfg_fof || (!(piocb->iocb_flag & LPFC_IO_OAS))) {
 			wq = phba->sli4_hba.fcp_wq[piocb->fcp_wqidx];
 		} else {
 			wq = phba->sli4_hba.oas_wq;
@@ -8735,7 +8810,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
 
 	if (phba->sli_rev == LPFC_SLI_REV4) {
 		if (piocb->iocb_flag &  LPFC_IO_FCP) {
-			if (!phba->cfg_EnableXLane || (!(piocb->iocb_flag &
+			if (!phba->cfg_fof || (!(piocb->iocb_flag &
 				LPFC_IO_OAS))) {
 				if (unlikely(!phba->sli4_hba.fcp_wq))
 					return IOCB_ERROR;
@@ -9170,6 +9245,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba)
 		pring->sli.sli3.next_cmdidx  = 0;
 		pring->sli.sli3.local_getidx = 0;
 		pring->sli.sli3.cmdidx = 0;
+		pring->flag = 0;
 		INIT_LIST_HEAD(&pring->txq);
 		INIT_LIST_HEAD(&pring->txcmplq);
 		INIT_LIST_HEAD(&pring->iocb_continueq);
@@ -9804,43 +9880,6 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	return retval;
 }
 
-/**
- * lpfc_sli_iocb_ring_abort - Unconditionally abort all iocbs on an iocb ring
- * @phba: Pointer to HBA context object.
- * @pring: Pointer to driver SLI ring object.
- *
- * This function aborts all iocbs in the given ring and frees all the iocb
- * objects in txq. This function issues abort iocbs unconditionally for all
- * the iocb commands in txcmplq. The iocbs in the txcmplq is not guaranteed
- * to complete before the return of this function. The caller is not required
- * to hold any locks.
- **/
-static void
-lpfc_sli_iocb_ring_abort(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
-{
-	LIST_HEAD(completions);
-	struct lpfc_iocbq *iocb, *next_iocb;
-
-	if (pring->ringno == LPFC_ELS_RING)
-		lpfc_fabric_abort_hba(phba);
-
-	spin_lock_irq(&phba->hbalock);
-
-	/* Take off all the iocbs on txq for cancelling */
-	list_splice_init(&pring->txq, &completions);
-	pring->txq_cnt = 0;
-
-	/* Next issue ABTS for everything on the txcmplq */
-	list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
-		lpfc_sli_abort_iotag_issue(phba, pring, iocb);
-
-	spin_unlock_irq(&phba->hbalock);
-
-	/* Cancel all the IOCBs from the completions list */
-	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
-			      IOERR_SLI_ABORTED);
-}
-
 /**
  * lpfc_sli_hba_iocb_abort - Abort all iocbs to an hba.
  * @phba: pointer to lpfc HBA data structure.
@@ -9856,7 +9895,7 @@ lpfc_sli_hba_iocb_abort(struct lpfc_hba *phba)
 
 	for (i = 0; i < psli->num_rings; i++) {
 		pring = &psli->ring[i];
-		lpfc_sli_iocb_ring_abort(phba, pring);
+		lpfc_sli_abort_iocb_ring(phba, pring);
 	}
 }
 
@@ -10080,6 +10119,124 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
 	return errcnt;
 }
 
+/**
+ * lpfc_sli_abort_taskmgmt - issue abort for all commands on a host/target/LUN
+ * @vport: Pointer to virtual port.
+ * @pring: Pointer to driver SLI ring object.
+ * @tgt_id: SCSI ID of the target.
+ * @lun_id: LUN ID of the scsi device.
+ * @taskmgmt_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST.
+ *
+ * This function sends an abort command for every SCSI command
+ * associated with the given virtual port pending on the ring
+ * filtered by lpfc_sli_validate_fcp_iocb function.
+ * When taskmgmt_cmd == LPFC_CTX_LUN, the function sends abort only to the
+ * FCP iocbs associated with lun specified by tgt_id and lun_id
+ * parameters
+ * When taskmgmt_cmd == LPFC_CTX_TGT, the function sends abort only to the
+ * FCP iocbs associated with SCSI target specified by tgt_id parameter.
+ * When taskmgmt_cmd == LPFC_CTX_HOST, the function sends abort to all
+ * FCP iocbs associated with virtual port.
+ * This function returns number of iocbs it aborted .
+ * This function is called with no locks held right after a taskmgmt
+ * command is sent.
+ **/
+int
+lpfc_sli_abort_taskmgmt(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
+			uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd cmd)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_iocbq *abtsiocbq;
+	struct lpfc_iocbq *iocbq;
+	IOCB_t *icmd;
+	int sum, i, ret_val;
+	unsigned long iflags;
+	struct lpfc_sli_ring *pring_s4;
+	uint32_t ring_number;
+
+	spin_lock_irq(&phba->hbalock);
+
+	/* all I/Os are in process of being flushed */
+	if (phba->hba_flag & HBA_FCP_IOQ_FLUSH) {
+		spin_unlock_irq(&phba->hbalock);
+		return 0;
+	}
+	sum = 0;
+
+	for (i = 1; i <= phba->sli.last_iotag; i++) {
+		iocbq = phba->sli.iocbq_lookup[i];
+
+		if (lpfc_sli_validate_fcp_iocb(iocbq, vport, tgt_id, lun_id,
+					       cmd) != 0)
+			continue;
+
+		/*
+		 * If the iocbq is already being aborted, don't take a second
+		 * action, but do count it.
+		 */
+		if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED)
+			continue;
+
+		/* issue ABTS for this IOCB based on iotag */
+		abtsiocbq = __lpfc_sli_get_iocbq(phba);
+		if (abtsiocbq == NULL)
+			continue;
+
+		icmd = &iocbq->iocb;
+		abtsiocbq->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
+		abtsiocbq->iocb.un.acxri.abortContextTag = icmd->ulpContext;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			abtsiocbq->iocb.un.acxri.abortIoTag =
+							 iocbq->sli4_xritag;
+		else
+			abtsiocbq->iocb.un.acxri.abortIoTag = icmd->ulpIoTag;
+		abtsiocbq->iocb.ulpLe = 1;
+		abtsiocbq->iocb.ulpClass = icmd->ulpClass;
+		abtsiocbq->vport = vport;
+
+		/* ABTS WQE must go to the same WQ as the WQE to be aborted */
+		abtsiocbq->fcp_wqidx = iocbq->fcp_wqidx;
+		if (iocbq->iocb_flag & LPFC_IO_FCP)
+			abtsiocbq->iocb_flag |= LPFC_USE_FCPWQIDX;
+
+		if (lpfc_is_link_up(phba))
+			abtsiocbq->iocb.ulpCommand = CMD_ABORT_XRI_CN;
+		else
+			abtsiocbq->iocb.ulpCommand = CMD_CLOSE_XRI_CN;
+
+		/* Setup callback routine and issue the command. */
+		abtsiocbq->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
+
+		/*
+		 * Indicate the IO is being aborted by the driver and set
+		 * the caller's flag into the aborted IO.
+		 */
+		iocbq->iocb_flag |= LPFC_DRIVER_ABORTED;
+
+		if (phba->sli_rev == LPFC_SLI_REV4) {
+			ring_number = MAX_SLI3_CONFIGURED_RINGS +
+					 iocbq->fcp_wqidx;
+			pring_s4 = &phba->sli.ring[ring_number];
+			/* Note: both hbalock and ring_lock must be set here */
+			spin_lock_irqsave(&pring_s4->ring_lock, iflags);
+			ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno,
+							abtsiocbq, 0);
+			spin_unlock_irqrestore(&pring_s4->ring_lock, iflags);
+		} else {
+			ret_val = __lpfc_sli_issue_iocb(phba, pring->ringno,
+							abtsiocbq, 0);
+		}
+
+
+		if (ret_val == IOCB_ERROR)
+			__lpfc_sli_release_iocbq(phba, abtsiocbq);
+		else
+			sum++;
+	}
+	spin_unlock_irq(&phba->hbalock);
+	return sum;
+}
+
 /**
  * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler
  * @phba: Pointer to HBA context object.

drivers/scsi/lpfc/lpfc_sli.h

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *

drivers/scsi/lpfc/lpfc_sli4.h

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2009-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2009-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *

drivers/scsi/lpfc/lpfc_version.h

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.45"
+#define LPFC_DRIVER_VERSION "10.2.8001.0."
 #define LPFC_DRIVER_NAME		"lpfc"
 
 /* Used for SLI 2/3 */
@@ -30,4 +30,4 @@
 
 #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
 		LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright(c) 2004-2013 Emulex.  All rights reserved."
+#define LPFC_COPYRIGHT "Copyright(c) 2004-2014 Emulex.  All rights reserved."

drivers/scsi/qla2xxx/qla_def.h

@@ -1648,16 +1648,16 @@ typedef struct {
  */
 struct crc_context {
 	uint32_t handle;		/* System handle. */
-	uint32_t ref_tag;
-	uint16_t app_tag;
+	__le32 ref_tag;
+	__le16 app_tag;
 	uint8_t ref_tag_mask[4];	/* Validation/Replacement Mask*/
 	uint8_t app_tag_mask[2];	/* Validation/Replacement Mask*/
-	uint16_t guard_seed;		/* Initial Guard Seed */
-	uint16_t prot_opts;		/* Requested Data Protection Mode */
-	uint16_t blk_size;		/* Data size in bytes */
+	__le16 guard_seed;		/* Initial Guard Seed */
+	__le16 prot_opts;		/* Requested Data Protection Mode */
+	__le16 blk_size;		/* Data size in bytes */
 	uint16_t runt_blk_guard;	/* Guard value for runt block (tape
 					 * only) */
-	uint32_t byte_count;		/* Total byte count/ total data
+	__le32 byte_count;		/* Total byte count/ total data
 					 * transfer count */
 	union {
 		struct {
@@ -1671,10 +1671,10 @@ struct crc_context {
 			uint32_t	reserved_6;
 		} nobundling;
 		struct {
-			uint32_t	dif_byte_count;	/* Total DIF byte
+			__le32	dif_byte_count;	/* Total DIF byte
 							 * count */
 			uint16_t	reserved_1;
-			uint16_t	dseg_count;	/* Data segment count */
+			__le16	dseg_count;	/* Data segment count */
 			uint32_t	reserved_2;
 			uint32_t	data_address[2];
 			uint32_t	data_length;

drivers/scsi/qla2xxx/qla_target.c

@@ -1996,7 +1996,7 @@ qlt_set_t10dif_tags(struct se_cmd *se_cmd, struct crc_context *ctx)
 	 * have been immplemented by TCM, before AppTag is avail.
 	 * Look for modesense_handlers[]
 	 */
-	ctx->app_tag = __constant_cpu_to_le16(0);
+	ctx->app_tag = 0;
 	ctx->app_tag_mask[0] = 0x0;
 	ctx->app_tag_mask[1] = 0x0;
 
@@ -2078,6 +2078,7 @@ qlt_build_ctio_crc2_pkt(struct qla_tgt_prm *prm, scsi_qla_host_t *vha)
 	struct se_cmd		*se_cmd = &cmd->se_cmd;
 	uint32_t h;
 	struct atio_from_isp *atio = &prm->cmd->atio;
+	uint16_t t16;
 
 	sgc = 0;
 	ha = vha->hw;
@@ -2174,8 +2175,13 @@ qlt_build_ctio_crc2_pkt(struct qla_tgt_prm *prm, scsi_qla_host_t *vha)
 	pkt->initiator_id[1] = atio->u.isp24.fcp_hdr.s_id[1];
 	pkt->initiator_id[2] = atio->u.isp24.fcp_hdr.s_id[0];
 	pkt->exchange_addr   = atio->u.isp24.exchange_addr;
-	pkt->ox_id  = swab16(atio->u.isp24.fcp_hdr.ox_id);
-	pkt->flags |= (atio->u.isp24.attr << 9);
+
+	/* silence compile warning */
+	t16 = be16_to_cpu(atio->u.isp24.fcp_hdr.ox_id);
+	pkt->ox_id  = cpu_to_le16(t16);
+
+	t16 = (atio->u.isp24.attr << 9);
+	pkt->flags |= cpu_to_le16(t16);
 	pkt->relative_offset = cpu_to_le32(prm->cmd->offset);
 
 	/* Set transfer direction */
@@ -2250,8 +2256,7 @@ qlt_build_ctio_crc2_pkt(struct qla_tgt_prm *prm, scsi_qla_host_t *vha)
 
 	if (bundling && prm->prot_seg_cnt) {
 		/* Walks dif segments */
-		pkt->add_flags |=
-			__constant_cpu_to_le16(CTIO_CRC2_AF_DIF_DSD_ENA);
+		pkt->add_flags |= CTIO_CRC2_AF_DIF_DSD_ENA;
 
 		cur_dsd = (uint32_t *) &crc_ctx_pkt->u.bundling.dif_address;
 		if (qla24xx_walk_and_build_prot_sglist(ha, NULL, cur_dsd,

drivers/scsi/qla2xxx/qla_target.h

@@ -316,7 +316,7 @@ struct fcp_hdr {
 	uint8_t  seq_id;
 	uint8_t  df_ctl;
 	uint16_t seq_cnt;
-	uint16_t ox_id;
+	__be16   ox_id;
 	uint16_t rx_id;
 	uint32_t parameter;
 } __packed;
@@ -441,7 +441,7 @@ struct ctio7_to_24xx {
 	union {
 		struct {
 			uint16_t reserved1;
-			uint16_t flags;
+			__le16 flags;
 			uint32_t residual;
 			uint16_t ox_id;
 			uint16_t scsi_status;
@@ -527,7 +527,7 @@ struct ctio_crc2_to_fw {
 
 	uint32_t handle;		/* System handle. */
 	uint16_t nport_handle;		/* N_PORT handle. */
-	uint16_t timeout;		/* Command timeout. */
+	__le16 timeout;		/* Command timeout. */
 
 	uint16_t dseg_count;		/* Data segment count. */
 	uint8_t  vp_index;
@@ -538,15 +538,15 @@ struct ctio_crc2_to_fw {
 	uint8_t  reserved1;
 	uint32_t exchange_addr;		/* rcv exchange address */
 	uint16_t reserved2;
-	uint16_t flags;			/* refer to CTIO7 flags values */
+	__le16 flags;			/* refer to CTIO7 flags values */
 	uint32_t residual;
-	uint16_t ox_id;
+	__le16 ox_id;
 	uint16_t scsi_status;
-	uint32_t relative_offset;
+	__le32 relative_offset;
 	uint32_t reserved5;
-	uint32_t transfer_length;		/* total fc transfer length */
+	__le32 transfer_length;		/* total fc transfer length */
 	uint32_t reserved6;
-	uint32_t crc_context_address[2];/* Data segment address. */
+	__le32 crc_context_address[2];/* Data segment address. */
 	uint16_t crc_context_len;	/* Data segment length. */
 	uint16_t reserved_1;		/* MUST be set to 0. */
 } __packed;