提交 a930a463 编写于 作者: H Harish Patil 提交者: David S. Miller

qlcnic: Rearrange ordering of header files inclusion

Include local headers files after kernel's header files.
Signed-off-by: NHarish Patil <harish.patil@qlogic.com>
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 07151bc9
......@@ -24,9 +24,7 @@
#include <linux/mii.h>
#include <linux/timer.h>
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <linux/io.h>
#include <asm/byteorder.h>
#include <linux/bitops.h>
......
......@@ -5,14 +5,15 @@
* See LICENSE.qlcnic for copyright and licensing details.
*/
#include "qlcnic.h"
#include "qlcnic_sriov.h"
#include <linux/if_vlan.h>
#include <linux/ipv6.h>
#include <linux/ethtool.h>
#include <linux/interrupt.h>
#include <linux/aer.h>
#include "qlcnic.h"
#include "qlcnic_sriov.h"
static void __qlcnic_83xx_process_aen(struct qlcnic_adapter *);
static int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *, u8);
static void qlcnic_83xx_configure_mac(struct qlcnic_adapter *, u8 *, u8,
......
......@@ -10,6 +10,7 @@
#include <linux/types.h>
#include <linux/etherdevice.h>
#include "qlcnic_hw.h"
#define QLCNIC_83XX_BAR0_LENGTH 0x4000
......
......@@ -5,13 +5,13 @@
* See LICENSE.qlcnic for copyright and licensing details.
*/
#include "qlcnic.h"
#include "qlcnic_hdr.h"
#include <linux/slab.h>
#include <net/ip.h>
#include <linux/bitops.h>
#include "qlcnic.h"
#include "qlcnic_hdr.h"
#define MASK(n) ((1ULL<<(n))-1)
#define OCM_WIN_P3P(addr) (addr & 0xffc0000)
......
......@@ -7,11 +7,6 @@
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include "qlcnic.h"
#include "qlcnic_sriov.h"
#include "qlcnic_hw.h"
#include <linux/swab.h>
#include <linux/dma-mapping.h>
#include <linux/if_vlan.h>
......@@ -25,6 +20,10 @@
#include <net/vxlan.h>
#endif
#include "qlcnic.h"
#include "qlcnic_sriov.h"
#include "qlcnic_hw.h"
MODULE_DESCRIPTION("QLogic 1/10 GbE Converged/Intelligent Ethernet Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(QLCNIC_LINUX_VERSIONID);
......
......@@ -5,13 +5,13 @@
* See LICENSE.qlcnic for copyright and licensing details.
*/
#include <net/ip.h>
#include "qlcnic.h"
#include "qlcnic_hdr.h"
#include "qlcnic_83xx_hw.h"
#include "qlcnic_hw.h"
#include <net/ip.h>
#define QLC_83XX_MINIDUMP_FLASH 0x520000
#define QLC_83XX_OCM_INDEX 3
#define QLC_83XX_PCI_INDEX 0
......
......@@ -8,10 +8,11 @@
#ifndef _QLCNIC_83XX_SRIOV_H_
#define _QLCNIC_83XX_SRIOV_H_
#include "qlcnic.h"
#include <linux/types.h>
#include <linux/pci.h>
#include "qlcnic.h"
extern const u32 qlcnic_83xx_reg_tbl[];
extern const u32 qlcnic_83xx_ext_reg_tbl[];
......
......@@ -5,10 +5,11 @@
* See LICENSE.qlcnic for copyright and licensing details.
*/
#include <linux/types.h>
#include "qlcnic_sriov.h"
#include "qlcnic.h"
#include "qlcnic_83xx_hw.h"
#include <linux/types.h>
#define QLC_BC_COMMAND 0
#define QLC_BC_RESPONSE 1
......
......@@ -5,9 +5,10 @@
* See LICENSE.qlcnic for copyright and licensing details.
*/
#include <linux/types.h>
#include "qlcnic_sriov.h"
#include "qlcnic.h"
#include <linux/types.h>
#define QLCNIC_SRIOV_VF_MAX_MAC 7
#define QLC_VF_MIN_TX_RATE 100
......
......@@ -7,10 +7,6 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include "qlcnic.h"
#include "qlcnic_hw.h"
#include <linux/swab.h>
#include <linux/dma-mapping.h>
#include <net/ip.h>
......@@ -24,6 +20,9 @@
#include <linux/hwmon-sysfs.h>
#endif
#include "qlcnic.h"
#include "qlcnic_hw.h"
int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable)
{
return -EOPNOTSUPP;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册