提交 a7a167bf 编写于 作者: A Andrew Vasquez 提交者: James Bottomley

[SCSI] qla2xxx: Rework firmware-trace facilities.

- Defer firmware dump-data raw-to-textual conversion to
  user-space.
- Add module parameter (ql2xallocfwdump) to allow for per-HBA
  allocations of firmware dump memory.
- Dump request and response queue data as per firmware group
  request.
- Add extended firmware trace support for ISP24XX/ISP54XX chips.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 9ea72909
......@@ -16,15 +16,16 @@ qla2x00_sysfs_read_fw_dump(struct kobject *kobj, char *buf, loff_t off,
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
char *rbuf = (char *)ha->fw_dump;
if (ha->fw_dump_reading == 0)
return 0;
if (off > ha->fw_dump_buffer_len)
return 0;
if (off + count > ha->fw_dump_buffer_len)
count = ha->fw_dump_buffer_len - off;
if (off > ha->fw_dump_len)
return 0;
if (off + count > ha->fw_dump_len)
count = ha->fw_dump_len - off;
memcpy(buf, &ha->fw_dump_buffer[off], count);
memcpy(buf, &rbuf[off], count);
return (count);
}
......@@ -36,7 +37,6 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, char *buf, loff_t off,
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
int reading;
uint32_t dump_size;
if (off != 0)
return (0);
......@@ -44,46 +44,27 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, char *buf, loff_t off,
reading = simple_strtol(buf, NULL, 10);
switch (reading) {
case 0:
if (ha->fw_dump_reading == 1) {
qla_printk(KERN_INFO, ha,
"Firmware dump cleared on (%ld).\n", ha->host_no);
if (!ha->fw_dump_reading)
break;
vfree(ha->fw_dump_buffer);
ha->fw_dump_buffer = NULL;
ha->fw_dump_reading = 0;
ha->fw_dumped = 0;
}
qla_printk(KERN_INFO, ha,
"Firmware dump cleared on (%ld).\n", ha->host_no);
ha->fw_dump_reading = 0;
ha->fw_dumped = 0;
break;
case 1:
if (ha->fw_dumped && !ha->fw_dump_reading) {
ha->fw_dump_reading = 1;
if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
dump_size = FW_DUMP_SIZE_24XX;
else {
dump_size = FW_DUMP_SIZE_1M;
if (ha->fw_memory_size < 0x20000)
dump_size = FW_DUMP_SIZE_128K;
else if (ha->fw_memory_size < 0x80000)
dump_size = FW_DUMP_SIZE_512K;
}
ha->fw_dump_buffer = (char *)vmalloc(dump_size);
if (ha->fw_dump_buffer == NULL) {
qla_printk(KERN_WARNING, ha,
"Unable to allocate memory for firmware "
"dump buffer (%d).\n", dump_size);
ha->fw_dump_reading = 0;
return (count);
}
qla_printk(KERN_INFO, ha,
"Firmware dump ready for read on (%ld).\n",
"Raw firmware dump ready for read on (%ld).\n",
ha->host_no);
memset(ha->fw_dump_buffer, 0, dump_size);
ha->isp_ops.ascii_fw_dump(ha);
ha->fw_dump_buffer_len = strlen(ha->fw_dump_buffer);
}
break;
case 2:
qla2x00_alloc_fw_dump(ha);
break;
}
return (count);
}
......
此差异已折叠。
......@@ -176,9 +176,6 @@
/*
* Firmware Dump structure definition
*/
#define FW_DUMP_SIZE_128K 0xBC000
#define FW_DUMP_SIZE_512K 0x2FC000
#define FW_DUMP_SIZE_1M 0x5FC000
struct qla2300_fw_dump {
uint16_t hccr;
......@@ -224,8 +221,6 @@ struct qla2100_fw_dump {
uint16_t risc_ram[0xf000];
};
#define FW_DUMP_SIZE_24XX 0x2B0000
struct qla24xx_fw_dump {
uint32_t host_status;
uint32_t host_reg[32];
......@@ -257,3 +252,39 @@ struct qla24xx_fw_dump {
uint32_t code_ram[0x2000];
uint32_t ext_mem[1];
};
#define EFT_NUM_BUFFERS 4
#define EFT_BYTES_PER_BUFFER 0x4000
#define EFT_SIZE ((EFT_BYTES_PER_BUFFER) * (EFT_NUM_BUFFERS))
struct qla2xxx_fw_dump {
uint8_t signature[4];
uint32_t version;
uint32_t fw_major_version;
uint32_t fw_minor_version;
uint32_t fw_subminor_version;
uint32_t fw_attributes;
uint32_t vendor;
uint32_t device;
uint32_t subsystem_vendor;
uint32_t subsystem_device;
uint32_t fixed_size;
uint32_t mem_size;
uint32_t req_q_size;
uint32_t rsp_q_size;
uint32_t eft_size;
uint32_t eft_addr_l;
uint32_t eft_addr_h;
uint32_t header_size;
union {
struct qla2100_fw_dump isp21;
struct qla2300_fw_dump isp23;
struct qla24xx_fw_dump isp24;
} isp;
};
......@@ -608,6 +608,7 @@ typedef struct {
#define MBC_SERDES_PARAMS 0x10 /* Serdes Tx Parameters. */
#define MBC_GET_IOCB_STATUS 0x12 /* Get IOCB status command. */
#define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */
#define MBC_TRACE_CONTROL 0x27 /* Trace control command. */
#define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */
#define MBC_SET_TIMEOUT_PARAMS 0x32 /* Set FW timeouts. */
#define MBC_MID_INITIALIZE_FIRMWARE 0x48 /* MID Initialize firmware. */
......@@ -618,6 +619,9 @@ typedef struct {
#define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */
#define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */
#define TC_ENABLE 4
#define TC_DISABLE 5
/* Firmware return data sizes */
#define FCAL_MAP_SIZE 128
......@@ -1997,7 +2001,6 @@ struct isp_operations {
uint32_t);
void (*fw_dump) (struct scsi_qla_host *, int);
void (*ascii_fw_dump) (struct scsi_qla_host *);
int (*beacon_on) (struct scsi_qla_host *);
int (*beacon_off) (struct scsi_qla_host *);
......@@ -2303,11 +2306,12 @@ typedef struct scsi_qla_host {
uint16_t fw_seriallink_options24[4];
/* Firmware dump information. */
void *fw_dump;
struct qla2xxx_fw_dump *fw_dump;
uint32_t fw_dump_len;
int fw_dumped;
int fw_dump_reading;
char *fw_dump_buffer;
int fw_dump_buffer_len;
dma_addr_t eft_dma;
void *eft;
uint8_t host_str[16];
uint32_t pci_attr;
......
......@@ -51,6 +51,8 @@ extern int qla2x00_abort_isp(scsi_qla_host_t *);
extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *);
extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
/*
* Global Data in qla_os.c source file.
*/
......@@ -61,6 +63,7 @@ extern int qlport_down_retry;
extern int ql2xplogiabsentdevice;
extern int ql2xloginretrycount;
extern int ql2xfdmienable;
extern int ql2xallocfwdump;
extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *);
......@@ -204,6 +207,9 @@ qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
extern int
qla2x00_stop_firmware(scsi_qla_host_t *);
extern int
qla2x00_trace_control(scsi_qla_host_t *, uint16_t, dma_addr_t, uint16_t);
/*
* Global Function Prototypes in qla_isr.c source file.
*/
......@@ -254,9 +260,6 @@ extern int qla24xx_write_optrom_data(struct scsi_qla_host *, uint8_t *,
extern void qla2100_fw_dump(scsi_qla_host_t *, int);
extern void qla2300_fw_dump(scsi_qla_host_t *, int);
extern void qla24xx_fw_dump(scsi_qla_host_t *, int);
extern void qla2100_ascii_fw_dump(scsi_qla_host_t *);
extern void qla2300_ascii_fw_dump(scsi_qla_host_t *);
extern void qla24xx_ascii_fw_dump(scsi_qla_host_t *);
extern void qla2x00_dump_regs(scsi_qla_host_t *);
extern void qla2x00_dump_buffer(uint8_t *, uint32_t);
extern void qla2x00_print_scsi_cmd(struct scsi_cmnd *);
......
......@@ -770,29 +770,104 @@ qla24xx_chip_diag(scsi_qla_host_t *ha)
return rval;
}
static void
void
qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
{
uint32_t dump_size = 0;
int rval;
uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size,
eft_size;
dma_addr_t eft_dma;
void *eft;
if (ha->fw_dump) {
qla_printk(KERN_WARNING, ha,
"Firmware dump previously allocated.\n");
return;
}
ha->fw_dumped = 0;
fixed_size = mem_size = eft_size = 0;
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
dump_size = sizeof(struct qla2100_fw_dump);
fixed_size = sizeof(struct qla2100_fw_dump);
} else if (IS_QLA23XX(ha)) {
dump_size = sizeof(struct qla2300_fw_dump);
dump_size += (ha->fw_memory_size - 0x11000) * sizeof(uint16_t);
} else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
dump_size = sizeof(struct qla24xx_fw_dump);
dump_size += (ha->fw_memory_size - 0x100000) * sizeof(uint32_t);
fixed_size = offsetof(struct qla2300_fw_dump, data_ram);
mem_size = (ha->fw_memory_size - 0x11000 + 1) *
sizeof(uint16_t);
} else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem);
mem_size = (ha->fw_memory_size - 0x100000 + 1) *
sizeof(uint32_t);
/* Allocate memory for Extended Trace Buffer. */
eft = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &eft_dma,
GFP_KERNEL);
if (!eft) {
qla_printk(KERN_WARNING, ha, "Unable to allocate "
"(%d KB) for EFT.\n", EFT_SIZE / 1024);
goto cont_alloc;
}
rval = qla2x00_trace_control(ha, TC_ENABLE, eft_dma,
EFT_NUM_BUFFERS);
if (rval) {
qla_printk(KERN_WARNING, ha, "Unable to initialize "
"EFT (%d).\n", rval);
dma_free_coherent(&ha->pdev->dev, EFT_SIZE, eft,
eft_dma);
goto cont_alloc;
}
qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
EFT_SIZE / 1024);
eft_size = EFT_SIZE;
memset(eft, 0, eft_size);
ha->eft_dma = eft_dma;
ha->eft = eft;
}
cont_alloc:
req_q_size = ha->request_q_length * sizeof(request_t);
rsp_q_size = ha->response_q_length * sizeof(response_t);
dump_size = offsetof(struct qla2xxx_fw_dump, isp);
dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
eft_size;
ha->fw_dump = vmalloc(dump_size);
if (ha->fw_dump)
qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware "
"dump...\n", dump_size / 1024);
else
if (!ha->fw_dump) {
qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for "
"firmware dump!!!\n", dump_size / 1024);
if (ha->eft) {
dma_free_coherent(&ha->pdev->dev, eft_size, ha->eft,
ha->eft_dma);
ha->eft = NULL;
ha->eft_dma = 0;
}
return;
}
qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware dump...\n",
dump_size / 1024);
ha->fw_dump_len = dump_size;
ha->fw_dump->signature[0] = 'Q';
ha->fw_dump->signature[1] = 'L';
ha->fw_dump->signature[2] = 'G';
ha->fw_dump->signature[3] = 'C';
ha->fw_dump->version = __constant_htonl(1);
ha->fw_dump->fixed_size = htonl(fixed_size);
ha->fw_dump->mem_size = htonl(mem_size);
ha->fw_dump->req_q_size = htonl(req_q_size);
ha->fw_dump->rsp_q_size = htonl(rsp_q_size);
ha->fw_dump->eft_size = htonl(eft_size);
ha->fw_dump->eft_addr_l = htonl(LSD(ha->eft_dma));
ha->fw_dump->eft_addr_h = htonl(MSD(ha->eft_dma));
ha->fw_dump->header_size =
htonl(offsetof(struct qla2xxx_fw_dump, isp));
}
/**
......@@ -810,8 +885,6 @@ qla2x00_resize_request_q(scsi_qla_host_t *ha)
dma_addr_t request_dma;
request_t *request_ring;
qla2x00_alloc_fw_dump(ha);
/* Valid only on recent ISPs. */
if (IS_QLA2100(ha) || IS_QLA2200(ha))
return;
......@@ -883,6 +956,9 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
&ha->fw_subminor_version,
&ha->fw_attributes, &ha->fw_memory_size);
qla2x00_resize_request_q(ha);
if (ql2xallocfwdump)
qla2x00_alloc_fw_dump(ha);
}
} else {
DEBUG2(printk(KERN_INFO
......
......@@ -2460,3 +2460,45 @@ qla2x00_stop_firmware(scsi_qla_host_t *ha)
return rval;
}
int
qla2x00_trace_control(scsi_qla_host_t *ha, uint16_t ctrl, dma_addr_t eft_dma,
uint16_t buffers)
{
int rval;
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
return QLA_FUNCTION_FAILED;
DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
mcp->mb[1] = ctrl;
mcp->out_mb = MBX_1|MBX_0;
mcp->in_mb = MBX_1|MBX_0;
if (ctrl == TC_ENABLE) {
mcp->mb[2] = LSW(eft_dma);
mcp->mb[3] = MSW(eft_dma);
mcp->mb[4] = LSW(MSD(eft_dma));
mcp->mb[5] = MSW(MSD(eft_dma));
mcp->mb[6] = buffers;
mcp->mb[7] = buffers;
mcp->out_mb |= MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2;
}
mcp->tov = 30;
mcp->flags = 0;
rval = qla2x00_mailbox_command(ha, mcp);
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
__func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
} else {
DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
}
return rval;
}
......@@ -54,6 +54,13 @@ module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
int ql2xallocfwdump = 1;
module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xallocfwdump,
"Option to enable allocation of memory for a firmware dump "
"during HBA initialization. Memory allocation requirements "
"vary by ISP type. Default is 1 - allocate memory.");
static void qla2x00_free_device(scsi_qla_host_t *);
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
......@@ -1405,7 +1412,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev)
ha->isp_ops.read_nvram = qla2x00_read_nvram_data;
ha->isp_ops.write_nvram = qla2x00_write_nvram_data;
ha->isp_ops.fw_dump = qla2100_fw_dump;
ha->isp_ops.ascii_fw_dump = qla2100_ascii_fw_dump;
ha->isp_ops.read_optrom = qla2x00_read_optrom_data;
ha->isp_ops.write_optrom = qla2x00_write_optrom_data;
if (IS_QLA2100(ha)) {
......@@ -1432,7 +1438,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev)
ha->isp_ops.pci_config = qla2300_pci_config;
ha->isp_ops.intr_handler = qla2300_intr_handler;
ha->isp_ops.fw_dump = qla2300_fw_dump;
ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump;
ha->isp_ops.beacon_on = qla2x00_beacon_on;
ha->isp_ops.beacon_off = qla2x00_beacon_off;
ha->isp_ops.beacon_blink = qla2x00_beacon_blink;
......@@ -1469,7 +1474,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev)
ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
ha->isp_ops.fw_dump = qla24xx_fw_dump;
ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump;
ha->isp_ops.read_optrom = qla24xx_read_optrom_data;
ha->isp_ops.write_optrom = qla24xx_write_optrom_data;
ha->isp_ops.beacon_on = qla24xx_beacon_on;
......@@ -1678,6 +1682,9 @@ qla2x00_free_device(scsi_qla_host_t *ha)
kthread_stop(t);
}
if (ha->eft)
qla2x00_trace_control(ha, TC_DISABLE, 0, 0);
/* Stop currently executing firmware. */
qla2x00_stop_firmware(ha);
......@@ -2012,6 +2019,13 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
/* free sp pool */
qla2x00_free_sp_pool(ha);
if (ha->fw_dump) {
if (ha->eft)
dma_free_coherent(&ha->pdev->dev,
ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
vfree(ha->fw_dump);
}
if (ha->sns_cmd)
dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
ha->sns_cmd, ha->sns_cmd_dma);
......@@ -2043,6 +2057,8 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
(ha->request_q_length + 1) * sizeof(request_t),
ha->request_ring, ha->request_dma);
ha->eft = NULL;
ha->eft_dma = 0;
ha->sns_cmd = NULL;
ha->sns_cmd_dma = 0;
ha->ct_sns = NULL;
......@@ -2071,13 +2087,9 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
}
INIT_LIST_HEAD(&ha->fcports);
vfree(ha->fw_dump);
vfree(ha->fw_dump_buffer);
ha->fw_dump = NULL;
ha->fw_dumped = 0;
ha->fw_dump_reading = 0;
ha->fw_dump_buffer = NULL;
vfree(ha->optrom_buffer);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册