Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: Realview & Versatile: Fix i2c_board_info definitions
  [ARM] 5608/1: Updated U300 defconfig
  [ARM] 5606/1: Fix ep93xx watchdog driver headers
  [ARM] 5594/1: Correct U300 VIC init PM setting
  [ARM] 5595/1: ep93xx: missing header in dma-m2p.c
  [ARM] Kirkwood: Correct header define
  [ARM] pxa: fix ULPI_{DIR,NXT,STP} MFP defines
  backlight: fix pwm_bl.c to notify platform code when suspending
  [ARM] pxa: use kzalloc() in pxa_init_gpio_chip()
  [ARM] pxa: correct I2CPWR clock for pxa3xx
  pxamci: correct DMA flow control
  ARM: add support for the EET board, based on the i.MX31 pcm037 module
  pcm037: add MT9T031 camera support
  Armadillo 500 add NAND flash device support (resend).
  ARM MXC: Armadillo 500 add NOR flash device support (resend).
  mx31: remove duplicated #include

arch/arm/configs/u300_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Thu Jul  2 00:16:59 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -113,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBDAF=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -542,13 +541,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -911,7 +911,6 @@ CONFIG_REGULATOR=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
@@ -1122,7 +1121,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/mach-ep93xx/dma-m2p.c

@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>

arch/arm/mach-kirkwood/mpp.h

@@ -289,7 +289,7 @@
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )

arch/arm/mach-mx3/Kconfig

@@ -36,6 +36,14 @@ config MACH_PCM037
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31

arch/arm/mach-mx3/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o

arch/arm/mach-mx3/armadillo5x0.c

@@ -31,6 +31,8 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,8 +48,10 @@
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
 	/* UART1 */
@@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+	{
+		.name		= "nor.bootloader",
+		.offset		= 0x00000000,
+		.size		= 4*32*1024,
+	}, {
+		.name		= "nor.kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16*128*1024,
+	}, {
+		.name		= "nor.userland",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 110*128*1024,
+	}, {
+		.name		= "nor.config",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1*128*1024,
+	},
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+	.width		= 2,
+	.parts		= armadillo5x0_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= CS0_BASE_ADDR,
+	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= -1,
+	.num_resources		= 1,
+	.resource		= &armadillo5x0_nor_flash_resource,
 };
 
 /*
@@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* Register NOR Flash */
+	mxc_register_device(&armadillo5x0_nor_flash,
+			    &armadillo5x0_nor_flash_pdata);
+
+	/* Register NAND Flash */
+	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+	/* set NAND page size to 2k if not configured via boot mode pins */
+	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
 }
 
 static void __init armadillo5x0_timer_init(void)

arch/arm/mach-mx3/devices.c

@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>

arch/arm/mach-mx3/pcm037.c

@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
@@ -33,29 +33,67 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
 
 #include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+	if (!strcmp("eet", str))
+		pcm037_instance = PCM037_EET;
+	else if (strcmp("pcm970", str))
+		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+	return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+	return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
 
 static unsigned int pcm037_pins[] = {
 	/* I2C */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
+	MX31_PIN_CSPI2_SS2__I2C3_SDA,
+	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* UART2 */
 	MX31_PIN_TXD2__TXD2,
 	MX31_PIN_RXD2__RXD2,
@@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
 	MX31_PIN_LCS0__GPI03_23,
+	/* CSI */
+	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
@@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
-#ifdef CONFIG_I2C_IMX
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
 };
 
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+	.bitrate = 20000,
+};
+
 static struct at24_platform_data board_eeprom = {
 	.byte_len = 4096,
 	.page_size = 32,
 	.flags = AT24_FLAG_ADDR16,
 };
 
+static int pcm037_camera_power(struct device *dev, int on)
+{
+	/* disable or enable the camera in X7 or X8 PCM970 connector */
+	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+	return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= pcm037_camera_power,
+	.board_info	= &pcm037_i2c_2_devices[0],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9t031",
+};
+
 static struct i2c_board_info pcm037_i2c_devices[] = {
-       {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
@@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		.type = "pcf8563",
 	}
 };
-#endif
+
+static struct platform_device pcm037_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink,
+	},
+};
 
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc1_exit,
 };
 
+struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
+	&pcm037_camera,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
 		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "CMEL-OLED",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
 	},
 };
 
@@ -397,6 +525,14 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
 			"pcm037");
 
+	if (pcm037_variant() == PCM037_EET)
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+	else
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+			ARRAY_SIZE(pcm037_uart1_handshake_pins),
+			"pcm037_uart1");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -415,18 +551,30 @@ static void __init mxc_board_init(void)
 	}
 
 
-#ifdef CONFIG_I2C_IMX
+	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 	if (!gpio_usbotg_hs_activate())
 		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink.power = NULL;
+
+	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+		mxc_register_device(&mx3_camera, &camera_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
-

arch/arm/mach-mx3/pcm037.h

+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+	PCM037_PCM970,
+	PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif

arch/arm/mach-mx3/pcm037_eet.c

+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+	/* SPI #1 */
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+
+	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+	/* GPIO keys */
+	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
+	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
+	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
+	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
+	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
+	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
+	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
+	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
+	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
+	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
+
+	/* LEDs */
+	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
+	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
+	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
+	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+	{
+		.modalias	= "dac124s085",
+		.max_speed_hz	= 400000,
+		.bus_num	= 0,
+		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
+		.mode		= SPI_CPHA,
+	},
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+	.chipselect = pcm037_spi1_cs,
+	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_L,
+		.gpio	= 0,
+		.desc	= "Wheel Manual",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_A,
+		.gpio	= 1,
+		.desc	= "Wheel AF",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_V,
+		.gpio	= 2,
+		.desc	= "Wheel View",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_M,
+		.gpio	= 3,
+		.desc	= "Wheel Menu",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_UP,
+		.gpio	= 32,
+		.desc	= "Nav Pad Up",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_RIGHT,
+		.gpio	= 33,
+		.desc	= "Nav Pad Right",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_DOWN,
+		.gpio	= 34,
+		.desc	= "Nav Pad Down",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_LEFT,
+		.gpio	= 35,
+		.desc	= "Nav Pad Left",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_ENTER,
+		.gpio	= 38,
+		.desc	= "Nav Pad Ok",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_O,
+		.gpio	= 39,
+		.desc	= "Wheel Off",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_FORWARD,
+		.gpio	= 50,
+		.desc	= "Focus Forward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_BACK,
+		.gpio	= 51,
+		.desc	= "Focus Backward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_MIDDLE,
+		.gpio	= 52,
+		.desc	= "Release Half",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_EXTRA,
+		.gpio	= 53,
+		.desc	= "Release Full",
+		.wakeup	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+	.buttons	= pcm037_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
+	.rep		= 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pcm037_gpio_keys_platform_data,
+	},
+};
+
+static int eet_init_devices(void)
+{
+	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+		return 0;
+
+	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+	/* SPI */
+	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+	platform_device_register(&pcm037_gpio_keys_device);
+
+	return 0;
+}
+
+late_initcall(eet_init_devices);

arch/arm/mach-pxa/include/mach/mfp-pxa300.h

@@ -567,9 +567,9 @@
 #define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
 #define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
 
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
 #endif /* CONFIG_CPU_PXA310 */
 
 #endif /* __ASM_ARCH_MFP_PXA300_H */

arch/arm/mach-pxa/pxa3xx.c

@@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
 static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
 	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),

arch/arm/mach-realview/core.c

@@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = {
 
 static struct i2c_board_info realview_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-		.type = "ds1338",
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 	},
 };
 

arch/arm/mach-u300/core.c

@@ -455,8 +455,8 @@ void __init u300_init_irq(void)
 	for (i = 0; i < NR_IRQS; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
 	u300_enable_intcon_clock();
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
 }
 
 

arch/arm/mach-versatile/core.c

@@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = {
 
 static struct i2c_board_info versatile_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-		.type = "ds1338",
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 	},
 };
 

arch/arm/plat-mxc/include/mach/iomux-mx3.h

@@ -602,6 +602,8 @@ enum iomux_pins {
 #define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI2_SCLK__I2C3_SCL	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)

arch/arm/plat-pxa/gpio.c

@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
 
 #include <mach/gpio.h>
 
@@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end)
 	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
 	struct pxa_gpio_chip *chips;
 
-	/* this is early, we have to use bootmem allocator, and we really
-	 * want this to be allocated dynamically for different 'gpio_end'
-	 */
-	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+	chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
 	if (chips == NULL) {
 		pr_err("%s: failed to allocate GPIO chips\n", __func__);
 		return -ENOMEM;
 	}
 
-	memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
-
 	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
 		struct gpio_chip *c = &chips[i].chip;
 

drivers/mmc/host/pxamci.c

@@ -168,12 +168,12 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 
 	if (data->flags & MMC_DATA_READ) {
 		host->dma_dir = DMA_FROM_DEVICE;
-		dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
+		dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
 		DRCMR(host->dma_drcmrtx) = 0;
 		DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
 	} else {
 		host->dma_dir = DMA_TO_DEVICE;
-		dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
+		dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
 		DRCMR(host->dma_drcmrrx) = 0;
 		DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
 	}

drivers/video/backlight/pwm_bl.c

@@ -145,6 +145,8 @@ static int pwm_backlight_suspend(struct platform_device *pdev,
 	struct backlight_device *bl = platform_get_drvdata(pdev);
 	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
 
+	if (pb->notify)
+		pb->notify(0);
 	pwm_config(pb->pwm, 0, pb->period);
 	pwm_disable(pb->pwm);
 	return 0;

drivers/watchdog/ep93xx_wdt.c

@@ -29,6 +29,7 @@
 #include <linux/watchdog.h>
 #include <linux/timer.h>
 #include <linux/uaccess.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 
 #define WDT_VERSION	"0.3"