提交 a6a5ed0d 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://dev.laptop.org/users/cjb/mmc

* 'for-linus' of git://dev.laptop.org/users/cjb/mmc:
  mmc: sdhci-s3c: Fix mmc card I/O problem
  mmc: sd: UHS-I bus speed should be set last in UHS initialization
  mmc: sdhi: initialise mmc_data->flags before use
  mmc: core: use non-reentrant workqueue for clock gating
  mmc: core: prevent aggressive clock gating racing with ios updates
  mmc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}
  mmc: sdhci-esdhc-imx: add missing inclusion of linux/module.h
......@@ -133,7 +133,7 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
if (mrq->done)
mrq->done(mrq);
mmc_host_clk_gate(host);
mmc_host_clk_release(host);
}
}
......@@ -192,7 +192,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
mrq->stop->mrq = mrq;
}
}
mmc_host_clk_ungate(host);
mmc_host_clk_hold(host);
led_trigger_event(host->led, LED_FULL);
host->ops->request(host, mrq);
}
......@@ -728,15 +728,17 @@ static inline void mmc_set_ios(struct mmc_host *host)
*/
void mmc_set_chip_select(struct mmc_host *host, int mode)
{
mmc_host_clk_hold(host);
host->ios.chip_select = mode;
mmc_set_ios(host);
mmc_host_clk_release(host);
}
/*
* Sets the host clock to the highest possible frequency that
* is below "hz".
*/
void mmc_set_clock(struct mmc_host *host, unsigned int hz)
static void __mmc_set_clock(struct mmc_host *host, unsigned int hz)
{
WARN_ON(hz < host->f_min);
......@@ -747,6 +749,13 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz)
mmc_set_ios(host);
}
void mmc_set_clock(struct mmc_host *host, unsigned int hz)
{
mmc_host_clk_hold(host);
__mmc_set_clock(host, hz);
mmc_host_clk_release(host);
}
#ifdef CONFIG_MMC_CLKGATE
/*
* This gates the clock by setting it to 0 Hz.
......@@ -779,7 +788,7 @@ void mmc_ungate_clock(struct mmc_host *host)
if (host->clk_old) {
BUG_ON(host->ios.clock);
/* This call will also set host->clk_gated to false */
mmc_set_clock(host, host->clk_old);
__mmc_set_clock(host, host->clk_old);
}
}
......@@ -807,8 +816,10 @@ void mmc_set_ungated(struct mmc_host *host)
*/
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
{
mmc_host_clk_hold(host);
host->ios.bus_mode = mode;
mmc_set_ios(host);
mmc_host_clk_release(host);
}
/*
......@@ -816,8 +827,10 @@ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
*/
void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
{
mmc_host_clk_hold(host);
host->ios.bus_width = width;
mmc_set_ios(host);
mmc_host_clk_release(host);
}
/**
......@@ -1015,8 +1028,10 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
ocr &= 3 << bit;
mmc_host_clk_hold(host);
host->ios.vdd = bit;
mmc_set_ios(host);
mmc_host_clk_release(host);
} else {
pr_warning("%s: host doesn't support card's voltages\n",
mmc_hostname(host));
......@@ -1063,8 +1078,10 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11
*/
void mmc_set_timing(struct mmc_host *host, unsigned int timing)
{
mmc_host_clk_hold(host);
host->ios.timing = timing;
mmc_set_ios(host);
mmc_host_clk_release(host);
}
/*
......@@ -1072,8 +1089,10 @@ void mmc_set_timing(struct mmc_host *host, unsigned int timing)
*/
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
{
mmc_host_clk_hold(host);
host->ios.drv_type = drv_type;
mmc_set_ios(host);
mmc_host_clk_release(host);
}
/*
......@@ -1091,6 +1110,8 @@ static void mmc_power_up(struct mmc_host *host)
{
int bit;
mmc_host_clk_hold(host);
/* If ocr is set, we use it */
if (host->ocr)
bit = ffs(host->ocr) - 1;
......@@ -1126,10 +1147,14 @@ static void mmc_power_up(struct mmc_host *host)
* time required to reach a stable voltage.
*/
mmc_delay(10);
mmc_host_clk_release(host);
}
static void mmc_power_off(struct mmc_host *host)
{
mmc_host_clk_hold(host);
host->ios.clock = 0;
host->ios.vdd = 0;
......@@ -1147,6 +1172,8 @@ static void mmc_power_off(struct mmc_host *host)
host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
mmc_host_clk_release(host);
}
/*
......
......@@ -119,14 +119,14 @@ static void mmc_host_clk_gate_work(struct work_struct *work)
}
/**
* mmc_host_clk_ungate - ungate hardware MCI clocks
* mmc_host_clk_hold - ungate hardware MCI clocks
* @host: host to ungate.
*
* Makes sure the host ios.clock is restored to a non-zero value
* past this call. Increase clock reference count and ungate clock
* if we're the first user.
*/
void mmc_host_clk_ungate(struct mmc_host *host)
void mmc_host_clk_hold(struct mmc_host *host)
{
unsigned long flags;
......@@ -164,14 +164,14 @@ static bool mmc_host_may_gate_card(struct mmc_card *card)
}
/**
* mmc_host_clk_gate - gate off hardware MCI clocks
* mmc_host_clk_release - gate off hardware MCI clocks
* @host: host to gate.
*
* Calls the host driver with ios.clock set to zero as often as possible
* in order to gate off hardware MCI clocks. Decrease clock reference
* count and schedule disabling of clock.
*/
void mmc_host_clk_gate(struct mmc_host *host)
void mmc_host_clk_release(struct mmc_host *host)
{
unsigned long flags;
......@@ -179,7 +179,7 @@ void mmc_host_clk_gate(struct mmc_host *host)
host->clk_requests--;
if (mmc_host_may_gate_card(host->card) &&
!host->clk_requests)
schedule_work(&host->clk_gate_work);
queue_work(system_nrt_wq, &host->clk_gate_work);
spin_unlock_irqrestore(&host->clk_lock, flags);
}
......@@ -231,7 +231,7 @@ static inline void mmc_host_clk_exit(struct mmc_host *host)
if (cancel_work_sync(&host->clk_gate_work))
mmc_host_clk_gate_delayed(host);
if (host->clk_gated)
mmc_host_clk_ungate(host);
mmc_host_clk_hold(host);
/* There should be only one user now */
WARN_ON(host->clk_requests > 1);
}
......
......@@ -16,16 +16,16 @@ int mmc_register_host_class(void);
void mmc_unregister_host_class(void);
#ifdef CONFIG_MMC_CLKGATE
void mmc_host_clk_ungate(struct mmc_host *host);
void mmc_host_clk_gate(struct mmc_host *host);
void mmc_host_clk_hold(struct mmc_host *host);
void mmc_host_clk_release(struct mmc_host *host);
unsigned int mmc_host_clk_rate(struct mmc_host *host);
#else
static inline void mmc_host_clk_ungate(struct mmc_host *host)
static inline void mmc_host_clk_hold(struct mmc_host *host)
{
}
static inline void mmc_host_clk_gate(struct mmc_host *host)
static inline void mmc_host_clk_release(struct mmc_host *host)
{
}
......
......@@ -469,56 +469,75 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
return 0;
}
static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
static void sd_update_bus_speed_mode(struct mmc_card *card)
{
unsigned int bus_speed = 0, timing = 0;
int err;
/*
* If the host doesn't support any of the UHS-I modes, fallback on
* default speed.
*/
if (!(card->host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50)))
return 0;
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))) {
card->sd_bus_speed = 0;
return;
}
if ((card->host->caps & MMC_CAP_UHS_SDR104) &&
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) {
bus_speed = UHS_SDR104_BUS_SPEED;
timing = MMC_TIMING_UHS_SDR104;
card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
card->sd_bus_speed = UHS_SDR104_BUS_SPEED;
} else if ((card->host->caps & MMC_CAP_UHS_DDR50) &&
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) {
bus_speed = UHS_DDR50_BUS_SPEED;
timing = MMC_TIMING_UHS_DDR50;
card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
card->sd_bus_speed = UHS_DDR50_BUS_SPEED;
} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode &
SD_MODE_UHS_SDR50)) {
bus_speed = UHS_SDR50_BUS_SPEED;
timing = MMC_TIMING_UHS_SDR50;
card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
card->sd_bus_speed = UHS_SDR50_BUS_SPEED;
} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) &&
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) {
bus_speed = UHS_SDR25_BUS_SPEED;
timing = MMC_TIMING_UHS_SDR25;
card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
card->sd_bus_speed = UHS_SDR25_BUS_SPEED;
} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 |
MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode &
SD_MODE_UHS_SDR12)) {
bus_speed = UHS_SDR12_BUS_SPEED;
timing = MMC_TIMING_UHS_SDR12;
card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
card->sd_bus_speed = UHS_SDR12_BUS_SPEED;
}
}
static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
{
int err;
unsigned int timing = 0;
switch (card->sd_bus_speed) {
case UHS_SDR104_BUS_SPEED:
timing = MMC_TIMING_UHS_SDR104;
card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
break;
case UHS_DDR50_BUS_SPEED:
timing = MMC_TIMING_UHS_DDR50;
card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
break;
case UHS_SDR50_BUS_SPEED:
timing = MMC_TIMING_UHS_SDR50;
card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
break;
case UHS_SDR25_BUS_SPEED:
timing = MMC_TIMING_UHS_SDR25;
card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
break;
case UHS_SDR12_BUS_SPEED:
timing = MMC_TIMING_UHS_SDR12;
card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
break;
default:
return 0;
}
card->sd_bus_speed = bus_speed;
err = mmc_sd_switch(card, 1, 0, bus_speed, status);
err = mmc_sd_switch(card, 1, 0, card->sd_bus_speed, status);
if (err)
return err;
if ((status[16] & 0xF) != bus_speed)
if ((status[16] & 0xF) != card->sd_bus_speed)
printk(KERN_WARNING "%s: Problem setting bus speed mode!\n",
mmc_hostname(card->host));
else {
......@@ -618,18 +637,24 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
}
/*
* Select the bus speed mode depending on host
* and card capability.
*/
sd_update_bus_speed_mode(card);
/* Set the driver strength for the card */
err = sd_select_driver_type(card, status);
if (err)
goto out;
/* Set bus speed mode of the card */
err = sd_set_bus_speed_mode(card, status);
/* Set current limit for the card */
err = sd_set_current_limit(card, status);
if (err)
goto out;
/* Set current limit for the card */
err = sd_set_current_limit(card, status);
/* Set bus speed mode of the card */
err = sd_set_bus_speed_mode(card, status);
if (err)
goto out;
......
......@@ -16,6 +16,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
......
......@@ -302,6 +302,8 @@ static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
ctrl &= ~SDHCI_CTRL_8BITBUS;
break;
default:
ctrl &= ~SDHCI_CTRL_4BITBUS;
ctrl &= ~SDHCI_CTRL_8BITBUS;
break;
}
......
......@@ -120,11 +120,11 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
mmc_data->hclk = clk_get_rate(priv->clk);
mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
mmc_data->get_cd = sh_mobile_sdhi_get_cd;
if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT)
mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
if (p) {
mmc_data->flags = p->tmio_flags;
if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT)
mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
mmc_data->ocr_mask = p->tmio_ocr_mask;
mmc_data->capabilities |= p->tmio_caps;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册