提交 a15e0384 编写于 作者: J Jeff Garzik

[netdrvr 8139too] replace hand-crafted kernel thread with workqueue

Gone are the days when 8139too was a shining example of how to use
kernel threads.  Delayed workqueues are easier, and map precisely to
our task:  running code from a kernel thread, after a periodic sleep.
上级 e2f2e58e
......@@ -590,12 +590,12 @@ struct rtl8139_private {
spinlock_t lock;
spinlock_t rx_lock;
chip_t chipset;
pid_t thr_pid;
wait_queue_head_t thr_wait;
struct completion thr_exited;
u32 rx_config;
struct rtl_extra_stats xstats;
int time_to_die;
struct work_struct thread;
long time_to_die; /* -1 no thr, 0 thr active, 1 thr cancel */
struct mii_if_info mii;
unsigned int regs_len;
unsigned long fifo_copy_timeout;
......@@ -620,7 +620,7 @@ static int rtl8139_open (struct net_device *dev);
static int mdio_read (struct net_device *dev, int phy_id, int location);
static void mdio_write (struct net_device *dev, int phy_id, int location,
int val);
static void rtl8139_start_thread(struct net_device *dev);
static void rtl8139_start_thread(struct rtl8139_private *tp);
static void rtl8139_tx_timeout (struct net_device *dev);
static void rtl8139_init_ring (struct net_device *dev);
static int rtl8139_start_xmit (struct sk_buff *skb,
......@@ -637,6 +637,7 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
static void rtl8139_set_rx_mode (struct net_device *dev);
static void __set_rx_mode (struct net_device *dev);
static void rtl8139_hw_start (struct net_device *dev);
static void rtl8139_thread (void *_data);
static struct ethtool_ops rtl8139_ethtool_ops;
/* write MMIO register, with flush */
......@@ -1007,8 +1008,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
(debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
spin_lock_init (&tp->lock);
spin_lock_init (&tp->rx_lock);
init_waitqueue_head (&tp->thr_wait);
init_completion (&tp->thr_exited);
INIT_WORK(&tp->thread, rtl8139_thread, dev);
tp->mii.dev = dev;
tp->mii.mdio_read = mdio_read;
tp->mii.mdio_write = mdio_write;
......@@ -1345,7 +1345,7 @@ static int rtl8139_open (struct net_device *dev)
dev->irq, RTL_R8 (MediaStatus),
tp->mii.full_duplex ? "full" : "half");
rtl8139_start_thread(dev);
rtl8139_start_thread(tp);
return 0;
}
......@@ -1594,56 +1594,45 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
RTL_R8 (Config1));
}
static int rtl8139_thread (void *data)
static void rtl8139_thread (void *_data)
{
struct net_device *dev = data;
struct net_device *dev = _data;
struct rtl8139_private *tp = netdev_priv(dev);
unsigned long timeout;
daemonize("%s", dev->name);
allow_signal(SIGTERM);
while (1) {
timeout = next_tick;
do {
timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
/* make swsusp happy with our thread */
try_to_freeze();
} while (!signal_pending (current) && (timeout > 0));
if (signal_pending (current)) {
flush_signals(current);
}
if (tp->time_to_die)
break;
if (rtnl_lock_interruptible ())
break;
if ((tp->time_to_die == 0) &&
(rtnl_lock_interruptible() == 0)) {
rtl8139_thread_iter (dev, tp, tp->mmio_addr);
rtnl_unlock ();
}
complete_and_exit (&tp->thr_exited, 0);
if (tp->time_to_die == 0)
schedule_delayed_work(&tp->thread, next_tick);
}
static void rtl8139_start_thread(struct net_device *dev)
static void rtl8139_start_thread(struct rtl8139_private *tp)
{
struct rtl8139_private *tp = netdev_priv(dev);
tp->thr_pid = -1;
tp->twistie = 0;
tp->time_to_die = 0;
tp->time_to_die = -1;
if (tp->chipset == CH_8139_K)
tp->twistie = 1;
else if (tp->drv_flags & HAS_LNK_CHNG)
return;
tp->thr_pid = kernel_thread(rtl8139_thread, dev, CLONE_FS|CLONE_FILES);
if (tp->thr_pid < 0) {
printk (KERN_WARNING "%s: unable to start kernel thread\n",
dev->name);
}
tp->time_to_die = 0;
schedule_delayed_work(&tp->thread, next_tick);
}
static void rtl8139_stop_thread(struct rtl8139_private *tp)
{
if (tp->time_to_die < 0)
return;
tp->time_to_die = 1;
wmb();
if (cancel_delayed_work(&tp->thread) == 0)
flush_scheduled_work();
}
static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
......@@ -2224,22 +2213,12 @@ static int rtl8139_close (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
int ret = 0;
unsigned long flags;
netif_stop_queue (dev);
if (tp->thr_pid >= 0) {
tp->time_to_die = 1;
wmb();
ret = kill_proc (tp->thr_pid, SIGTERM, 1);
if (ret) {
printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
return ret;
}
wait_for_completion (&tp->thr_exited);
}
rtl8139_stop_thread(tp);
if (netif_msg_ifdown(tp))
printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
dev->name, RTL_R16 (IntrStatus));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册