sparc: copy sparc64 specific files to asm-sparc

Used the following script to copy the files:
cd include
set -e
SPARC64=`ls asm-sparc64`
for FILE in ${SPARC64}; do
	if [ -f asm-sparc/$FILE ]; then
		echo $FILE exist in asm-sparc
	else
		git mv asm-sparc64/$FILE asm-sparc/$FILE
		printf "#include <asm-sparc/$FILE>\n" > asm-sparc64/$FILE
		git add asm-sparc64/$FILE
	fi
done
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

include/asm-sparc/agp.h

+#ifndef AGP_H
+#define AGP_H 1
+
+/* dummy for now */
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_cache() mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif

include/asm-sparc/apb.h

+/*
+ * apb.h: Advanced PCI Bridge Configuration Registers and Bits
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC64_APB_H
+#define _SPARC64_APB_H
+
+#define APB_TICK_REGISTER			0xb0
+#define APB_INT_ACK				0xb8
+#define APB_PRIMARY_MASTER_RETRY_LIMIT		0xc0
+#define APB_DMA_ASFR				0xc8
+#define APB_DMA_AFAR				0xd0
+#define APB_PIO_TARGET_RETRY_LIMIT		0xd8
+#define APB_PIO_TARGET_LATENCY_TIMER		0xd9
+#define APB_DMA_TARGET_RETRY_LIMIT		0xda
+#define APB_DMA_TARGET_LATENCY_TIMER		0xdb
+#define APB_SECONDARY_MASTER_RETRY_LIMIT	0xdc
+#define APB_SECONDARY_CONTROL			0xdd
+#define APB_IO_ADDRESS_MAP			0xde
+#define APB_MEM_ADDRESS_MAP			0xdf
+
+#define APB_PCI_CONTROL_LOW			0xe0
+#  define APB_PCI_CTL_LOW_ARB_PARK			(1 << 21)
+#  define APB_PCI_CTL_LOW_ERRINT_EN			(1 << 8)
+
+#define APB_PCI_CONTROL_HIGH			0xe4
+#  define APB_PCI_CTL_HIGH_SERR				(1 << 2)
+#  define APB_PCI_CTL_HIGH_ARBITER_EN			(1 << 0)
+
+#define APB_PIO_ASFR				0xe8
+#define APB_PIO_AFAR				0xf0
+#define APB_DIAG_REGISTER			0xf8
+
+#endif /* !(_SPARC64_APB_H) */

include/asm-sparc/backoff.h

+#ifndef _SPARC64_BACKOFF_H
+#define _SPARC64_BACKOFF_H
+
+#define BACKOFF_LIMIT	(4 * 1024)
+
+#ifdef CONFIG_SMP
+
+#define BACKOFF_SETUP(reg)	\
+	mov	1, reg
+
+#define BACKOFF_SPIN(reg, tmp, label)	\
+	mov	reg, tmp; \
+88:	brnz,pt	tmp, 88b; \
+	 sub	tmp, 1, tmp; \
+	set	BACKOFF_LIMIT, tmp; \
+	cmp	reg, tmp; \
+	bg,pn	%xcc, label; \
+	 nop; \
+	ba,pt	%xcc, label; \
+	 sllx	reg, 1, reg;
+
+#else
+
+#define BACKOFF_SETUP(reg)
+#define BACKOFF_SPIN(reg, tmp, label) \
+	ba,pt	%xcc, label; \
+	 nop;
+
+#endif
+
+#endif /* _SPARC64_BACKOFF_H */

include/asm-sparc/bbc.h

+/*
+ * bbc.h: Defines for BootBus Controller found on UltraSPARC-III
+ *        systems.
+ *
+ * Copyright (C) 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_BBC_H
+#define _SPARC64_BBC_H
+
+/* Register sizes are indicated by "B" (Byte, 1-byte),
+ * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or
+ * "Q" (Quad, 8 bytes) inside brackets.
+ */
+
+#define BBC_AID		0x00	/* [B] Agent ID			*/
+#define BBC_DEVP	0x01	/* [B] Device Present		*/
+#define BBC_ARB		0x02	/* [B] Arbitration		*/
+#define BBC_QUIESCE	0x03	/* [B] Quiesce			*/
+#define BBC_WDACTION	0x04	/* [B] Watchdog Action		*/
+#define BBC_SPG		0x06	/* [B] Soft POR Gen		*/
+#define BBC_SXG		0x07	/* [B] Soft XIR Gen		*/
+#define BBC_PSRC	0x08	/* [W] POR Source		*/
+#define BBC_XSRC	0x0c	/* [B] XIR Source		*/
+#define BBC_CSC		0x0d	/* [B] Clock Synthesizers Control*/
+#define BBC_ES_CTRL	0x0e	/* [H] Energy Star Control	*/
+#define BBC_ES_ACT	0x10	/* [W] E* Assert Change Time	*/
+#define BBC_ES_DACT	0x14	/* [B] E* De-Assert Change Time	*/
+#define BBC_ES_DABT	0x15	/* [B] E* De-Assert Bypass Time	*/
+#define BBC_ES_ABT	0x16	/* [H] E* Assert Bypass Time	*/
+#define BBC_ES_PST	0x18	/* [W] E* PLL Settle Time	*/
+#define BBC_ES_FSL	0x1c	/* [W] E* Frequency Switch Latency*/
+#define BBC_EBUST	0x20	/* [Q] EBUS Timing		*/
+#define BBC_JTAG_CMD	0x28	/* [W] JTAG+ Command		*/
+#define BBC_JTAG_CTRL	0x2c	/* [B] JTAG+ Control		*/
+#define BBC_I2C_SEL	0x2d	/* [B] I2C Selection		*/
+#define BBC_I2C_0_S1	0x2e	/* [B] I2C ctrlr-0 reg S1	*/
+#define BBC_I2C_0_S0	0x2f	/* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/
+#define BBC_I2C_1_S1	0x30	/* [B] I2C ctrlr-1 reg S1	*/
+#define BBC_I2C_1_S0	0x31	/* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/
+#define BBC_KBD_BEEP	0x32	/* [B] Keyboard Beep		*/
+#define BBC_KBD_BCNT	0x34	/* [W] Keyboard Beep Counter	*/
+
+#define BBC_REGS_SIZE	0x40
+
+/* There is a 2K scratch ram area at offset 0x80000 but I doubt
+ * we will use it for anything.
+ */
+
+/* Agent ID register.  This register shows the Safari Agent ID
+ * for the processors.  The value returned depends upon which
+ * cpu is reading the register.
+ */
+#define BBC_AID_ID	0x07	/* Safari ID		*/
+#define BBC_AID_RESV	0xf8	/* Reserved		*/
+
+/* Device Present register.  One can determine which cpus are actually
+ * present in the machine by interrogating this register.
+ */
+#define BBC_DEVP_CPU0	0x01	/* Processor 0 present	*/
+#define BBC_DEVP_CPU1	0x02	/* Processor 1 present	*/
+#define BBC_DEVP_CPU2	0x04	/* Processor 2 present	*/
+#define BBC_DEVP_CPU3	0x08	/* Processor 3 present	*/
+#define BBC_DEVP_RESV	0xf0	/* Reserved		*/
+
+/* Arbitration register.  This register is used to block access to
+ * the BBC from a particular cpu.
+ */
+#define BBC_ARB_CPU0	0x01	/* Enable cpu 0 BBC arbitratrion */
+#define BBC_ARB_CPU1	0x02	/* Enable cpu 1 BBC arbitratrion */
+#define BBC_ARB_CPU2	0x04	/* Enable cpu 2 BBC arbitratrion */
+#define BBC_ARB_CPU3	0x08	/* Enable cpu 3 BBC arbitratrion */
+#define BBC_ARB_RESV	0xf0	/* Reserved			 */
+
+/* Quiesce register.  Bus and BBC segments for cpus can be disabled
+ * with this register, ie. for hot plugging.
+ */
+#define BBC_QUIESCE_S02	0x01	/* Quiesce Safari segment for cpu 0 and 2 */
+#define BBC_QUIESCE_S13	0x02	/* Quiesce Safari segment for cpu 1 and 3 */
+#define BBC_QUIESCE_B02	0x04	/* Quiesce BBC segment for cpu 0 and 2    */
+#define BBC_QUIESCE_B13	0x08	/* Quiesce BBC segment for cpu 1 and 3    */
+#define BBC_QUIESCE_FD0 0x10	/* Disable Fatal_Error[0] reporting	  */
+#define BBC_QUIESCE_FD1 0x20	/* Disable Fatal_Error[1] reporting	  */
+#define BBC_QUIESCE_FD2 0x40	/* Disable Fatal_Error[2] reporting	  */
+#define BBC_QUIESCE_FD3 0x80	/* Disable Fatal_Error[3] reporting	  */
+
+/* Watchdog Action register.  When the watchdog device timer expires
+ * a line is enabled to the BBC.  The action BBC takes when this line
+ * is asserted can be controlled by this regiser.
+ */
+#define BBC_WDACTION_RST  0x01	/* When set, watchdog causes system reset.
+				 * When clear, BBC ignores watchdog signal.
+				 */
+#define BBC_WDACTION_RESV 0xfe	/* Reserved */
+
+/* Soft_POR_GEN register.  The POR (Power On Reset) signal may be asserted
+ * for specific processors or all processors via this register.
+ */
+#define BBC_SPG_CPU0	0x01 /* Assert POR for processor 0	*/
+#define BBC_SPG_CPU1	0x02 /* Assert POR for processor 1	*/
+#define BBC_SPG_CPU2	0x04 /* Assert POR for processor 2	*/
+#define BBC_SPG_CPU3	0x08 /* Assert POR for processor 3	*/
+#define BBC_SPG_CPUALL	0x10 /* Reset all processors and reset
+			      * the entire system.
+			      */
+#define BBC_SPG_RESV	0xe0 /* Reserved			*/
+
+/* Soft_XIR_GEN register.  The XIR (eXternally Initiated Reset) signal
+ * may be asserted to specific processors via this register.
+ */
+#define BBC_SXG_CPU0	0x01 /* Assert XIR for processor 0	*/
+#define BBC_SXG_CPU1	0x02 /* Assert XIR for processor 1	*/
+#define BBC_SXG_CPU2	0x04 /* Assert XIR for processor 2	*/
+#define BBC_SXG_CPU3	0x08 /* Assert XIR for processor 3	*/
+#define BBC_SXG_RESV	0xf0 /* Reserved			*/
+
+/* POR Source register.  One may identify the cause of the most recent
+ * reset by reading this register.
+ */
+#define BBC_PSRC_SPG0	0x0001 /* CPU 0 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG1	0x0002 /* CPU 1 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG2	0x0004 /* CPU 2 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG3	0x0008 /* CPU 3 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPGSYS	0x0010 /* System reset via BBC_SPG register	*/
+#define BBC_PSRC_JTAG	0x0020 /* System reset via JTAG+		*/
+#define BBC_PSRC_BUTTON	0x0040 /* System reset via push-button dongle	*/
+#define BBC_PSRC_PWRUP	0x0080 /* System reset via power-up		*/
+#define BBC_PSRC_FE0	0x0100 /* CPU 0 reported Fatal_Error		*/
+#define BBC_PSRC_FE1	0x0200 /* CPU 1 reported Fatal_Error		*/
+#define BBC_PSRC_FE2	0x0400 /* CPU 2 reported Fatal_Error		*/
+#define BBC_PSRC_FE3	0x0800 /* CPU 3 reported Fatal_Error		*/
+#define BBC_PSRC_FE4	0x1000 /* Schizo reported Fatal_Error		*/
+#define BBC_PSRC_FE5	0x2000 /* Safari device 5 reported Fatal_Error	*/
+#define BBC_PSRC_FE6	0x4000 /* CPMS reported Fatal_Error		*/
+#define BBC_PSRC_SYNTH	0x8000 /* System reset when on-board clock synthesizers
+				* were updated.
+				*/
+#define BBC_PSRC_WDT   0x10000 /* System reset via Super I/O watchdog	*/
+#define BBC_PSRC_RSC   0x20000 /* System reset via RSC remote monitoring
+				* device
+				*/
+
+/* XIR Source register.  The source of an XIR event sent to a processor may
+ * be determined via this register.
+ */
+#define BBC_XSRC_SXG0	0x01	/* CPU 0 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG1	0x02	/* CPU 1 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG2	0x04	/* CPU 2 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG3	0x08	/* CPU 3 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_JTAG	0x10	/* All CPUs received XIR via JTAG+         */
+#define BBC_XSRC_W_OR_B	0x20	/* All CPUs received XIR either because:
+				 * a) Super I/O watchdog fired, or
+				 * b) XIR push button was activated
+				 */
+#define BBC_XSRC_RESV	0xc0	/* Reserved				   */
+
+/* Clock Synthesizers Control register.  This register provides the big-bang
+ * programming interface to the two clock synthesizers of the machine.
+ */
+#define BBC_CSC_SLOAD	0x01	/* Directly connected to S_LOAD pins	*/
+#define BBC_CSC_SDATA	0x02	/* Directly connected to S_DATA pins	*/
+#define BBC_CSC_SCLOCK	0x04	/* Directly connected to S_CLOCK pins	*/
+#define BBC_CSC_RESV	0x78	/* Reserved				*/
+#define BBC_CSC_RST	0x80	/* Generate system reset when S_LOAD==1	*/
+
+/* Energy Star Control register.  This register is used to generate the
+ * clock frequency change trigger to the main system devices (Schizo and
+ * the processors).  The transition occurs when bits in this register
+ * go from 0 to 1, only one bit must be set at once else no action
+ * occurs.  Basically the sequence of events is:
+ * a) Choose new frequency: full, 1/2 or 1/32
+ * b) Program this desired frequency into the cpus and Schizo.
+ * c) Set the same value in this register.
+ * d) 16 system clocks later, clear this register.
+ */
+#define BBC_ES_CTRL_1_1		0x01	/* Full frequency	*/
+#define BBC_ES_CTRL_1_2		0x02	/* 1/2 frequency	*/
+#define BBC_ES_CTRL_1_32	0x20	/* 1/32 frequency	*/
+#define BBC_ES_RESV		0xdc	/* Reserved		*/
+
+/* Energy Star Assert Change Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the detection of FREEZE_ACK being asserted and the assertion of
+ * the CLK_CHANGE_L[2:0] signals.
+ */
+#define BBC_ES_ACT_VAL	0xff
+
+/* Energy Star Assert Bypass Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of
+ * the ESTAR_PLL_BYPASS signal.
+ */
+#define BBC_ES_ABT_VAL	0xffff
+
+/* Energy Star PLL Settle Time register.  This determines the number of
+ * BBC clock cycles (which is half the system frequency) between the
+ * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L
+ * signal.
+ */
+#define BBC_ES_PST_VAL	0xffffffff
+
+/* Energy Star Frequency Switch Latency register.  This is the number of
+ * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first
+ * edge of the Safari clock at the new frequency.
+ */
+#define BBC_ES_FSL_VAL	0xffffffff
+
+/* Keyboard Beep control register.  This is a simple enabler for the audio
+ * beep sound.
+ */
+#define BBC_KBD_BEEP_ENABLE	0x01 /* Enable beep	*/
+#define BBC_KBD_BEEP_RESV	0xfe /* Reserved	*/
+
+/* Keyboard Beep Counter register.  There is a free-running counter inside
+ * the BBC which runs at half the system clock.  The bit set in this register
+ * determines when the audio sound is generated.  So for example if bit
+ * 10 is set, the audio beep will oscillate at 1/(2**12).  The keyboard beep
+ * generator automatically selects a different bit to use if the system clock
+ * is changed via Energy Star.
+ */
+#define BBC_KBD_BCNT_BITS	0x0007fc00
+#define BBC_KBC_BCNT_RESV	0xfff803ff
+
+#endif /* _SPARC64_BBC_H */
+

include/asm-sparc/chafsr.h

+#ifndef _SPARC64_CHAFSR_H
+#define _SPARC64_CHAFSR_H
+
+/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+/* Comments indicate which processor variants on which the bit definition
+ * is valid.  Codes are:
+ * ch	-->	cheetah
+ * ch+	-->	cheetah plus
+ * jp	-->	jalapeno
+ */
+
+/* All bits of this register except M_SYNDROME and E_SYNDROME are
+ * read, write 1 to clear.  M_SYNDROME and E_SYNDROME are read-only.
+ */
+
+/* Software bit set by linux trap handlers to indicate that the trap was
+ * signalled at %tl >= 1.
+ */
+#define CHAFSR_TL1		(1UL << 63UL) /* n/a */
+
+/* Unmapped error from system bus for prefetch queue or
+ * store queue read operation
+ */
+#define CHPAFSR_DTO		(1UL << 59UL) /* ch+ */
+
+/* Bus error from system bus for prefetch queue or store queue
+ * read operation
+ */
+#define CHPAFSR_DBERR		(1UL << 58UL) /* ch+ */
+
+/* Hardware corrected E-cache Tag ECC error */
+#define CHPAFSR_THCE		(1UL << 57UL) /* ch+ */
+/* System interface protocol error, hw timeout caused */
+#define JPAFSR_JETO		(1UL << 57UL) /* jp */
+
+/* SW handled correctable E-cache Tag ECC error */
+#define CHPAFSR_TSCE		(1UL << 56UL) /* ch+ */
+/* Parity error on system snoop results */
+#define JPAFSR_SCE		(1UL << 56UL) /* jp */
+
+/* Uncorrectable E-cache Tag ECC error */
+#define CHPAFSR_TUE		(1UL << 55UL) /* ch+ */
+/* System interface protocol error, illegal command detected */
+#define JPAFSR_JEIC		(1UL << 55UL) /* jp */
+
+/* Uncorrectable system bus data ECC error due to prefetch
+ * or store fill request
+ */
+#define CHPAFSR_DUE		(1UL << 54UL) /* ch+ */
+/* System interface protocol error, illegal ADTYPE detected */
+#define JPAFSR_JEIT		(1UL << 54UL) /* jp */
+
+/* Multiple errors of the same type have occurred.  This bit is set when
+ * an uncorrectable error or a SW correctable error occurs and the status
+ * bit to report that error is already set.  When multiple errors of
+ * different types are indicated by setting multiple status bits.
+ *
+ * This bit is not set if multiple HW corrected errors with the same
+ * status bit occur, only uncorrectable and SW correctable ones have
+ * this behavior.
+ *
+ * This bit is not set when multiple ECC errors happen within a single
+ * 64-byte system bus transaction.  Only the first ECC error in a 16-byte
+ * subunit will be logged.  All errors in subsequent 16-byte subunits
+ * from the same 64-byte transaction are ignored.
+ */
+#define CHAFSR_ME		(1UL << 53UL) /* ch,ch+,jp */
+
+/* Privileged state error has occurred.  This is a capture of PSTATE.PRIV
+ * at the time the error is detected.
+ */
+#define CHAFSR_PRIV		(1UL << 52UL) /* ch,ch+,jp */
+
+/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error
+ * bits and record the most recently detected errors.  Bits accumulate
+ * errors that have been detected since the last write to clear the bit.
+ */
+
+/* System interface protocol error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_PERR		(1UL << 51UL) /* ch,ch+,jp */
+
+/* Internal processor error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_IERR		(1UL << 50UL) /* ch,ch+,jp */
+
+/* System request parity error on incoming address */
+#define CHAFSR_ISAP		(1UL << 49UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus MTAG ECC error */
+#define CHAFSR_EMC		(1UL << 48UL) /* ch,ch+ */
+/* Parity error on L2 cache tag SRAM */
+#define JPAFSR_ETP		(1UL << 48UL) /* jp */
+
+/* Uncorrectable system bus MTAG ECC error */
+#define CHAFSR_EMU		(1UL << 47UL) /* ch,ch+ */
+/* Out of range memory error has occurred */
+#define JPAFSR_OM		(1UL << 47UL) /* jp */
+
+/* HW Corrected system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVC		(1UL << 46UL) /* ch,ch+ */
+/* Error due to unsupported store */
+#define JPAFSR_UMS		(1UL << 46UL) /* jp */
+
+/* Uncorrectable system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVU		(1UL << 45UL) /* ch,ch+,jp */
+
+/* Unmapped error from system bus */
+#define CHAFSR_TO		(1UL << 44UL) /* ch,ch+,jp */
+
+/* Bus error response from system bus */
+#define CHAFSR_BERR		(1UL << 43UL) /* ch,ch+,jp */
+
+/* SW Correctable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCC		(1UL << 42UL) /* ch,ch+,jp */
+
+/* Uncorrectable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCU		(1UL << 41UL) /* ch,ch+,jp */
+
+/* Copyout HW Corrected ECC error */
+#define CHAFSR_CPC		(1UL << 40UL) /* ch,ch+,jp */
+
+/* Copyout Uncorrectable ECC error */
+#define CHAFSR_CPU		(1UL << 39UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for writeback */
+#define CHAFSR_WDC		(1UL << 38UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for writeback */
+#define CHAFSR_WDU		(1UL << 37UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDC		(1UL << 36UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDU		(1UL << 35UL) /* ch,ch+,jp */
+
+/* Uncorrectable system bus data ECC error for read of memory or I/O */
+#define CHAFSR_UE		(1UL << 34UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus data ECC error for read of memory or I/O */
+#define CHAFSR_CE		(1UL << 33UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from remote cache/memory */
+#define JPAFSR_RUE		(1UL << 32UL) /* jp */
+
+/* Correctable ECC error from remote cache/memory */
+#define JPAFSR_RCE		(1UL << 31UL) /* jp */
+
+/* JBUS parity error on returned read data */
+#define JPAFSR_BP		(1UL << 30UL) /* jp */
+
+/* JBUS parity error on data for writeback or block store */
+#define JPAFSR_WBP		(1UL << 29UL) /* jp */
+
+/* Foreign read to DRAM incurring correctable ECC error */
+#define JPAFSR_FRC		(1UL << 28UL) /* jp */
+
+/* Foreign read to DRAM incurring uncorrectable ECC error */
+#define JPAFSR_FRU		(1UL << 27UL) /* jp */
+
+#define CHAFSR_ERRORS		(CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define CHPAFSR_ERRORS		(CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \
+				 CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \
+				 CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define JPAFSR_ERRORS		(JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \
+				 JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \
+				 CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \
+				 JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \
+				 CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \
+				 CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \
+				 CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \
+				 JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \
+				 JPAFSR_FRC | JPAFSR_FRU)
+
+/* Active JBUS request signal when error occurred */
+#define JPAFSR_JBREQ		(0x7UL << 24UL) /* jp */
+#define JPAFSR_JBREQ_SHIFT	24UL
+
+/* L2 cache way information */
+#define JPAFSR_ETW		(0x3UL << 22UL) /* jp */
+#define JPAFSR_ETW_SHIFT	22UL
+
+/* System bus MTAG ECC syndrome.  This field captures the status of the
+ * first occurrence of the highest-priority error according to the M_SYND
+ * overwrite policy.  After the AFSR sticky bit, corresponding to the error
+ * for which the M_SYND is reported, is cleared, the contents of the M_SYND
+ * field will be unchanged by will be unfrozen for further error capture.
+ */
+#define CHAFSR_M_SYNDROME	(0xfUL << 16UL) /* ch,ch+,jp */
+#define CHAFSR_M_SYNDROME_SHIFT	16UL
+
+/* Agenid Id of the foreign device causing the UE/CE errors */
+#define JPAFSR_AID		(0x1fUL << 9UL) /* jp */
+#define JPAFSR_AID_SHIFT	9UL
+
+/* System bus or E-cache data ECC syndrome.  This field captures the status
+ * of the first occurrence of the highest-priority error according to the
+ * E_SYND overwrite policy.  After the AFSR sticky bit, corresponding to the
+ * error for which the E_SYND is reported, is cleare, the contents of the E_SYND
+ * field will be unchanged but will be unfrozen for further error capture.
+ */
+#define CHAFSR_E_SYNDROME	(0x1ffUL << 0UL) /* ch,ch+,jp */
+#define CHAFSR_E_SYNDROME_SHIFT	0UL
+
+/* The AFSR must be explicitly cleared by software, it is not cleared automatically
+ * by a read.  Writes to bits <51:33> with bits set will clear the corresponding
+ * bits in the AFSR.  Bits associated with disrupting traps must be cleared before
+ * interrupts are re-enabled to prevent multiple traps for the same error.  I.e.
+ * PSTATE.IE and AFSR bits control delivery of disrupting traps.
+ *
+ * Since there is only one AFAR, when multiple events have been logged by the
+ * bits in the AFSR, at most one of these events will have its status captured
+ * in the AFAR.  The highest priority of those event bits will get AFAR logging.
+ * The AFAR will be unlocked and available to capture the address of another event
+ * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is
+ * cleared.  For example, if AFSR.CE is detected, then AFSR.UE (which overwrites
+ * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked
+ * and ready for another event, even though AFSR.CE is still set.  The same rules
+ * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR.
+ */
+
+#endif /* _SPARC64_CHAFSR_H */

include/asm-sparc/chmctrl.h

+#ifndef _SPARC64_CHMCTRL_H
+#define _SPARC64_CHMCTRL_H
+
+/* Cheetah memory controller programmable registers. */
+#define CHMCTRL_TCTRL1		0x00 /* Memory Timing Control I		*/
+#define CHMCTRL_TCTRL2		0x08 /* Memory Timing Control II	*/
+#define CHMCTRL_TCTRL3		0x38 /* Memory Timing Control III	*/
+#define CHMCTRL_TCTRL4		0x40 /* Memory Timing Control IV	*/
+#define CHMCTRL_DECODE1		0x10 /* Memory Address Decode I		*/
+#define CHMCTRL_DECODE2		0x18 /* Memory Address Decode II	*/
+#define CHMCTRL_DECODE3		0x20 /* Memory Address Decode III	*/
+#define CHMCTRL_DECODE4		0x28 /* Memory Address Decode IV	*/
+#define CHMCTRL_MACTRL		0x30 /* Memory Address Control		*/
+
+/* Memory Timing Control I */
+#define TCTRL1_SDRAMCTL_DLY	0xf000000000000000UL
+#define TCTRL1_SDRAMCTL_DLY_SHIFT     60
+#define TCTRL1_SDRAMCLK_DLY	0x0e00000000000000UL
+#define TCTRL1_SDRAMCLK_DLY_SHIFT     57
+#define TCTRL1_R		0x0100000000000000UL
+#define TCTRL1_R_SHIFT 		      56
+#define TCTRL1_AUTORFR_CYCLE	0x00fe000000000000UL
+#define TCTRL1_AUTORFR_CYCLE_SHIFT    49
+#define TCTRL1_RD_WAIT		0x0001f00000000000UL
+#define TCTRL1_RD_WAIT_SHIFT	      44
+#define TCTRL1_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL1_PC_CYCLE_SHIFT	      38
+#define TCTRL1_WR_MORE_RAS_PW	0x0000003f00000000UL
+#define TCTRL1_WR_MORE_RAS_PW_SHIFT   32
+#define TCTRL1_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL1_RD_MORE_RAS_PW_SHIFT   26
+#define TCTRL1_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL1_ACT_WR_DLY_SHIFT	      20
+#define TCTRL1_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL1_ACT_RD_DLY_SHIFT	      14
+#define TCTRL1_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL1_BANK_PRESENT_SHIFT     12
+#define TCTRL1_RFR_INT		0x0000000000000ff8UL
+#define TCTRL1_RFR_INT_SHIFT	      3
+#define TCTRL1_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL1_SET_MODE_REG_SHIFT     2
+#define TCTRL1_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL1_RFR_ENABLE_SHIFT	      1
+#define TCTRL1_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL1_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control II */
+#define TCTRL2_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL2_WR_MSEL_DLY_SHIFT      58
+#define TCTRL2_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL2_RD_MSEL_DLY_SHIFT      52
+#define TCTRL2_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL2_WRDATA_THLD_SHIFT      50
+#define TCTRL2_RDWR_RD_TI_DLY	0x0003f00000000000UL
+#define TCTRL2_RDWR_RD_TI_DLY_SHIFT   44
+#define TCTRL2_AUTOPRECHG_ENBL	0x0000080000000000UL
+#define TCTRL2_AUTOPRECHG_ENBL_SHIFT  43
+#define TCTRL2_RDWR_PI_MORE_DLY	0x000007c000000000UL
+#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38
+#define TCTRL2_RDWR_1_DLY	0x0000003f00000000UL
+#define TCTRL2_RDWR_1_DLY_SHIFT       32
+#define TCTRL2_WRWR_PI_MORE_DLY	0x00000000f8000000UL
+#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27
+#define TCTRL2_WRWR_1_DLY	0x0000000007e00000UL
+#define TCTRL2_WRWR_1_DLY_SHIFT       21
+#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL
+#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL2_R		0x0000000000008000UL
+#define TCTRL2_R_SHIFT		      15
+#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* Memory Timing Control III */
+#define TCTRL3_SDRAM_CTL_DLY	0xf000000000000000UL
+#define TCTRL3_SDRAM_CTL_DLY_SHIFT    60
+#define TCTRL3_SDRAM_CLK_DLY	0x0e00000000000000UL
+#define TCTRL3_SDRAM_CLK_DLY_SHIFT    57
+#define TCTRL3_R		0x0100000000000000UL
+#define TCTRL3_R_SHIFT		      56
+#define TCTRL3_AUTO_RFR_CYCLE	0x00fe000000000000UL
+#define TCTRL3_AUTO_RFR_CYCLE_SHIFT   49
+#define TCTRL3_RD_WAIT		0x0001f00000000000UL
+#define TCTRL3_RD_WAIT_SHIFT	      44
+#define TCTRL3_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL3_PC_CYCLE_SHIFT	      38
+#define TCTRL3_WR_MORE_RAW_PW	0x0000003f00000000UL
+#define TCTRL3_WR_MORE_RAW_PW_SHIFT   32
+#define TCTRL3_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL3_RD_MORE_RAW_PW_SHIFT   26
+#define TCTRL3_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL3_ACT_WR_DLY_SHIFT       20
+#define TCTRL3_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL3_ACT_RD_DLY_SHIFT       14
+#define TCTRL3_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL3_BANK_PRESENT_SHIFT     12
+#define TCTRL3_RFR_INT		0x0000000000000ff8UL
+#define TCTRL3_RFR_INT_SHIFT	      3
+#define TCTRL3_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL3_SET_MODE_REG_SHIFT     2
+#define TCTRL3_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL3_RFR_ENABLE_SHIFT       1
+#define TCTRL3_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL3_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control IV */
+#define TCTRL4_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL4_WR_MSEL_DLY_SHIFT      58
+#define TCTRL4_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL4_RD_MSEL_DLY_SHIFT      52
+#define TCTRL4_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL4_WRDATA_THLD_SHIFT      50
+#define TCTRL4_RDWR_RD_RI_DLY	0x0003f00000000000UL
+#define TCTRL4_RDWR_RD_RI_DLY_SHIFT   44
+#define TCTRL4_AUTO_PRECHG_ENBL	0x0000080000000000UL
+#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43
+#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL
+#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38
+#define TCTRL4_RD_WR_TI_DLY	0x0000003f00000000UL
+#define TCTRL4_RD_WR_TI_DLY_SHIFT     32
+#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL
+#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27
+#define TCTRL4_WR_WR_TI_DLY	0x0000000007e00000UL
+#define TCTRL4_WR_WR_TI_DLY_SHIFT     21
+#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0
+#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL4_R		0x0000000000008000UL
+#define TCTRL4_R_SHIFT		      15
+#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* All 4 memory address decoding registers have the
+ * same layout.
+ */
+#define MEM_DECODE_VALID	0x8000000000000000UL /* Valid */
+#define MEM_DECODE_VALID_SHIFT	      63
+#define MEM_DECODE_UK		0x001ffe0000000000UL /* Upper mask */
+#define MEM_DECODE_UK_SHIFT	      41
+#define MEM_DECODE_UM		0x0000001ffff00000UL /* Upper match */
+#define MEM_DECODE_UM_SHIFT	      20
+#define MEM_DECODE_LK		0x000000000003c000UL /* Lower mask */
+#define MEM_DECODE_LK_SHIFT	      14
+#define MEM_DECODE_LM		0x0000000000000f00UL /* Lower match */
+#define MEM_DECODE_LM_SHIFT           8
+
+#define PA_UPPER_BITS		0x000007fffc000000UL
+#define PA_UPPER_BITS_SHIFT	26
+#define PA_LOWER_BITS		0x00000000000003c0UL
+#define PA_LOWER_BITS_SHIFT	6
+
+#define MACTRL_R0		         0x8000000000000000UL
+#define MACTRL_R0_SHIFT		         63
+#define MACTRL_ADDR_LE_PW                0x7000000000000000UL
+#define MACTRL_ADDR_LE_PW_SHIFT		 60
+#define MACTRL_CMD_PW                    0x0f00000000000000UL
+#define MACTRL_CMD_PW_SHIFT		 56
+#define MACTRL_HALF_MODE_WR_MSEL_DLY     0x00fc000000000000UL
+#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50
+#define MACTRL_HALF_MODE_RD_MSEL_DLY     0x0003f00000000000UL
+#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY   0x00000f0000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY   0x000000e000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37
+#define MACTRL_R1                        0x0000001000000000UL
+#define MACTRL_R1_SHIFT                      36
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32
+#define MACTRL_ENC_INTLV_B3              0x00000000f8000000UL
+#define MACTRL_ENC_INTLV_B3_SHIFT              27
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23
+#define MACTRL_ENC_INTLV_B2              0x00000000007c0000UL
+#define MACTRL_ENC_INTLV_B2_SHIFT              18
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14
+#define MACTRL_ENC_INTLV_B1              0x0000000000003e00UL
+#define MACTRL_ENC_INTLV_B1_SHIFT               9
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT  5
+#define MACTRL_ENC_INTLV_B0              0x000000000000001fUL
+#define MACTRL_ENC_INTLV_B0_SHIFT               0
+
+#endif /* _SPARC64_CHMCTRL_H */

include/asm-sparc/cmt.h

+#ifndef _SPARC64_CMT_H
+#define _SPARC64_CMT_H
+
+/* cmt.h: Chip Multi-Threading register definitions
+ *
+ * Copyright (C) 2004 David S. Miller (davem@redhat.com)
+ */
+
+/* ASI_CORE_ID - private */
+#define LP_ID		0x0000000000000010UL
+#define  LP_ID_MAX	0x00000000003f0000UL
+#define  LP_ID_ID	0x000000000000003fUL
+
+/* ASI_INTR_ID - private */
+#define LP_INTR_ID	0x0000000000000000UL
+#define  LP_INTR_ID_ID	0x00000000000003ffUL
+
+/* ASI_CESR_ID - private */
+#define CESR_ID		0x0000000000000040UL
+#define  CESR_ID_ID	0x00000000000000ffUL
+
+/* ASI_CORE_AVAILABLE - shared */
+#define LP_AVAIL	0x0000000000000000UL
+#define  LP_AVAIL_1	0x0000000000000002UL
+#define  LP_AVAIL_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE_STATUS - shared */
+#define LP_ENAB_STAT	0x0000000000000010UL
+#define  LP_ENAB_STAT_1	0x0000000000000002UL
+#define  LP_ENAB_STAT_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE - shared */
+#define LP_ENAB		0x0000000000000020UL
+#define  LP_ENAB_1	0x0000000000000002UL
+#define  LP_ENAB_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING - shared */
+#define LP_RUNNING_RW	0x0000000000000050UL
+#define LP_RUNNING_W1S	0x0000000000000060UL
+#define LP_RUNNING_W1C	0x0000000000000068UL
+#define  LP_RUNNING_1	0x0000000000000002UL
+#define  LP_RUNNING_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING_STAT - shared */
+#define LP_RUN_STAT	0x0000000000000058UL
+#define  LP_RUN_STAT_1	0x0000000000000002UL
+#define  LP_RUN_STAT_0	0x0000000000000001UL
+
+/* ASI_XIR_STEERING - shared */
+#define LP_XIR_STEER	0x0000000000000030UL
+#define  LP_XIR_STEER_1	0x0000000000000002UL
+#define  LP_XIR_STEER_0	0x0000000000000001UL
+
+/* ASI_CMT_ERROR_STEERING - shared */
+#define CMT_ER_STEER	0x0000000000000040UL
+#define  CMT_ER_STEER_1	0x0000000000000002UL
+#define  CMT_ER_STEER_0	0x0000000000000001UL
+
+#endif /* _SPARC64_CMT_H */

include/asm-sparc/compat.h

+#ifndef _ASM_SPARC64_COMPAT_H
+#define _ASM_SPARC64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_time_t	st_atime;
+	compat_ulong_t	st_atime_nsec;
+	compat_time_t	st_mtime;
+	compat_ulong_t	st_mtime_nsec;
+	compat_time_t	st_ctime;
+	compat_ulong_t	st_ctime_nsec;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	u32		__unused4[2];
+};
+
+struct compat_stat64 {
+	unsigned long long	st_dev;
+
+	unsigned long long	st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long	st_rdev;
+
+	unsigned char	__pad3[8];
+
+	long long	st_size;
+	unsigned int	st_blksize;
+
+	unsigned char	__pad4[8];
+	unsigned int	st_blocks;
+
+	unsigned int	st_atime;
+	unsigned int	st_atime_nsec;
+
+	unsigned int	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned int	st_ctime;
+	unsigned int	st_ctime_nsec;
+
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+#define F_GETLK64	12
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_INFINITY 0x7fffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = current_thread_info()->kregs;
+	unsigned long usp = regs->u_regs[UREG_I6];
+
+	if (!(test_thread_flag(TIF_32BIT)))
+		usp += STACK_BIAS;
+	else
+		usp &= 0xffffffffUL;
+
+	usp -= len;
+	usp &= ~0x7UL;
+
+	return (void __user *) usp;
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short __pad1;
+	compat_mode_t mode;
+	unsigned short __pad2;
+	unsigned short seq;
+	unsigned long __unused1;	/* yes they really are 64bit pads */
+	unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	unsigned int	__pad1;
+	compat_time_t	sem_otime;
+	unsigned int	__pad2;
+	compat_time_t	sem_ctime;
+	u32		sem_nsems;
+	u32		__unused1;
+	u32		__unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	unsigned int	__pad1;
+	compat_time_t	msg_stime;
+	unsigned int	__pad2;
+	compat_time_t	msg_rtime;
+	unsigned int	__pad3;
+	compat_time_t	msg_ctime;
+	unsigned int	msg_cbytes;
+	unsigned int	msg_qnum;
+	unsigned int	msg_qbytes;
+	compat_pid_t	msg_lspid;
+	compat_pid_t	msg_lrpid;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	unsigned int	__pad1;
+	compat_time_t	shm_atime;
+	unsigned int	__pad2;
+	compat_time_t	shm_dtime;
+	unsigned int	__pad3;
+	compat_time_t	shm_ctime;
+	compat_size_t	shm_segsz;
+	compat_pid_t	shm_cpid;
+	compat_pid_t	shm_lpid;
+	unsigned int	shm_nattch;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _ASM_SPARC64_COMPAT_H */

include/asm-sparc/compat_signal.h

+#ifndef _COMPAT_SIGNAL_H
+#define _COMPAT_SIGNAL_H
+
+#include <linux/compat.h>
+#include <asm/signal.h>
+
+#ifdef CONFIG_COMPAT
+struct __new_sigaction32 {
+	unsigned		sa_handler;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+	compat_sigset_t 	sa_mask;
+};
+
+struct __old_sigaction32 {
+	unsigned		sa_handler;
+	compat_old_sigset_t  	sa_mask;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack32 {
+	u32			ss_sp;
+	int			ss_flags;
+	compat_size_t		ss_size;
+} stack_t32;
+#endif
+
+#endif /* !(_COMPAT_SIGNAL_H) */

include/asm-sparc/dcr.h

+#ifndef _SPARC64_DCR_H
+#define _SPARC64_DCR_H
+
+/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */
+#define DCR_DPE		0x0000000000001000 /* III+: D$ Parity Error Enable	*/
+#define DCR_OBS		0x0000000000000fc0 /* Observability Bus Controls	*/
+#define DCR_BPE		0x0000000000000020 /* Branch Predict Enable		*/
+#define DCR_RPE		0x0000000000000010 /* Return Address Prediction Enable	*/
+#define DCR_SI		0x0000000000000008 /* Single Instruction Disable	*/
+#define DCR_IPE		0x0000000000000004 /* III+: I$ Parity Error Enable	*/
+#define DCR_IFPOE	0x0000000000000002 /* IRQ FP Operation Enable		*/
+#define DCR_MS		0x0000000000000001 /* Multi-Scalar dispatch		*/
+
+#endif /* _SPARC64_DCR_H */

include/asm-sparc/dcu.h

+#ifndef _SPARC64_DCU_H
+#define _SPARC64_DCU_H
+
+#include <linux/const.h>
+
+/* UltraSparc-III Data Cache Unit Control Register */
+#define DCU_CP	_AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu	*/
+#define DCU_CV	_AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu	*/
+#define DCU_ME	_AC(0x0000800000000000,UL) /* NC-store Merging Enable	*/
+#define DCU_RE	_AC(0x0000400000000000,UL) /* RAW bypass Enable		*/
+#define DCU_PE	_AC(0x0000200000000000,UL) /* PCache Enable		*/
+#define DCU_HPE	_AC(0x0000100000000000,UL) /* HW prefetch Enable	*/
+#define DCU_SPE	_AC(0x0000080000000000,UL) /* SW prefetch Enable	*/
+#define DCU_SL	_AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
+#define DCU_WE	_AC(0x0000020000000000,UL) /* WCache enable		*/
+#define DCU_PM	_AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask	*/
+#define DCU_VM	_AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask	*/
+#define DCU_PR	_AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable	*/
+#define DCU_PW	_AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
+#define DCU_VR	_AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable	*/
+#define DCU_VW	_AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
+#define DCU_DM	_AC(0x0000000000000008,UL) /* DMMU Enable		*/
+#define DCU_IM	_AC(0x0000000000000004,UL) /* IMMU Enable		*/
+#define DCU_DC	_AC(0x0000000000000002,UL) /* Data Cache Enable		*/
+#define DCU_IC	_AC(0x0000000000000001,UL) /* Instruction Cache Enable	*/
+
+#endif /* _SPARC64_DCU_H */

include/asm-sparc/estate.h

+#ifndef _SPARC64_ESTATE_H
+#define _SPARC64_ESTATE_H
+
+/* UltraSPARC-III E-cache Error Enable */
+#define ESTATE_ERROR_FMT	0x0000000000040000 /* Force MTAG ECC		*/
+#define ESTATE_ERROR_FMESS	0x000000000003c000 /* Forced MTAG ECC val	*/
+#define ESTATE_ERROR_FMD	0x0000000000002000 /* Force DATA ECC		*/
+#define ESTATE_ERROR_FDECC	0x0000000000001ff0 /* Forced DATA ECC val	*/
+#define ESTATE_ERROR_UCEEN	0x0000000000000008 /* See below			*/
+#define ESTATE_ERROR_NCEEN	0x0000000000000002 /* See below			*/
+#define ESTATE_ERROR_CEEN	0x0000000000000001 /* See below			*/
+
+/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache
+ * errors 2) uncorrectable E-cache errors.  Such events only occur on reads
+ * of the E-cache by the local processor for: 1) data loads 2) instruction
+ * fetches 3) atomic operations.  Such events _cannot_ occur for: 1) merge
+ * 2) writeback 2) copyout.  The AFSR bits associated with these traps are
+ * UCC and UCU.
+ */
+
+/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps
+ * for uncorrectable ECC errors and system errors.
+ *
+ * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT,
+ * or system bus BusERR:
+ * 1) As the result of an instruction fetch, will generate instruction_access_error
+ * 2) As the result of a load etc. will generate data_access_error.
+ * 3) As the result of store merge completion, writeback, or copyout will
+ *    generate a disrupting ECC_error trap.
+ * 4) As the result of such errors on instruction vector fetch can generate any
+ *    of the 3 trap types.
+ *
+ * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
+ * BERR, and TO.
+ */
+
+/* CEEN enables the ECC_error trap for hardware corrected ECC errors.  System bus
+ * reads resulting in a hardware corrected data or MTAG ECC error will generate an
+ * ECC_error disrupting trap with this bit enabled.
+ *
+ * This same trap will also be generated when a hardware corrected ECC error results
+ * during store merge, writeback, and copyout operations.
+ */
+
+/* In general, if the trap enable bits above are disabled the AFSR bits will still
+ * log the events even though the trap will not be generated by the processor.
+ */
+
+#endif /* _SPARC64_ESTATE_H */

include/asm-sparc/fhc.h

+/*
+ * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
+ *
+ * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_FHC_H
+#define _SPARC64_FHC_H
+
+#include <linux/timer.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/upa.h>
+
+struct linux_fhc;
+
+/* Clock board register offsets. */
+#define CLOCK_CTRL	0x00UL	/* Main control */
+#define CLOCK_STAT1	0x10UL	/* Status one */
+#define CLOCK_STAT2	0x20UL	/* Status two */
+#define CLOCK_PWRSTAT	0x30UL	/* Power status */
+#define CLOCK_PWRPRES	0x40UL	/* Power presence */
+#define CLOCK_TEMP	0x50UL	/* Temperature */
+#define CLOCK_IRQDIAG	0x60UL	/* IRQ diagnostics */
+#define CLOCK_PWRSTAT2	0x70UL	/* Power status two */
+
+#define CLOCK_CTRL_LLED		0x04	/* Left LED, 0 == on */
+#define CLOCK_CTRL_MLED		0x02	/* Mid LED, 1 == on */
+#define CLOCK_CTRL_RLED		0x01	/* RIght LED, 1 == on */
+
+struct linux_central {
+	struct linux_fhc		*child;
+	unsigned long			cfreg;
+	unsigned long			clkregs;
+	unsigned long			clkver;
+	int				slots;
+	struct device_node		*prom_node;
+
+	struct linux_prom_ranges	central_ranges[PROMREG_MAX];
+	int				num_central_ranges;
+};
+
+/* Firehose controller register offsets */
+struct fhc_regs {
+	unsigned long			pregs;	/* FHC internal regs */
+#define FHC_PREGS_ID	0x00UL	/* FHC ID */
+#define  FHC_ID_VERS		0xf0000000 /* Version of this FHC		*/
+#define  FHC_ID_PARTID		0x0ffff000 /* Part ID code (0x0f9f == FHC)	*/
+#define  FHC_ID_MANUF		0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/
+#define  FHC_ID_RESV		0x00000001 /* Read as one			*/
+#define FHC_PREGS_RCS	0x10UL	/* FHC Reset Control/Status Register */
+#define  FHC_RCS_POR		0x80000000 /* Last reset was a power cycle	*/
+#define  FHC_RCS_SPOR		0x40000000 /* Last reset was sw power on reset	*/
+#define  FHC_RCS_SXIR		0x20000000 /* Last reset was sw XIR reset	*/
+#define  FHC_RCS_BPOR		0x10000000 /* Last reset was due to POR button	*/
+#define  FHC_RCS_BXIR		0x08000000 /* Last reset was due to XIR button	*/
+#define  FHC_RCS_WEVENT		0x04000000 /* CPU reset was due to wakeup event	*/
+#define  FHC_RCS_CFATAL		0x02000000 /* Centerplane Fatal Error signalled	*/
+#define  FHC_RCS_FENAB		0x01000000 /* Fatal errors elicit system reset	*/
+#define FHC_PREGS_CTRL	0x20UL	/* FHC Control Register */
+#define  FHC_CONTROL_ICS	0x00100000 /* Ignore Centerplane Signals	*/
+#define  FHC_CONTROL_FRST	0x00080000 /* Fatal Error Reset Enable		*/
+#define  FHC_CONTROL_LFAT	0x00040000 /* AC/DC signalled a local error	*/
+#define  FHC_CONTROL_SLINE	0x00010000 /* Firmware Synchronization Line	*/
+#define  FHC_CONTROL_DCD	0x00008000 /* DC-->DC Converter Disable		*/
+#define  FHC_CONTROL_POFF	0x00004000 /* AC/DC Controller PLL Disable	*/
+#define  FHC_CONTROL_FOFF	0x00002000 /* FHC Controller PLL Disable	*/
+#define  FHC_CONTROL_AOFF	0x00001000 /* CPU A SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_BOFF	0x00000800 /* CPU B SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_PSOFF	0x00000400 /* Turns off this FHC's power supply	*/
+#define  FHC_CONTROL_IXIST	0x00000200 /* 0=FHC tells clock board it exists	*/
+#define  FHC_CONTROL_XMSTR	0x00000100 /* 1=Causes this FHC to be XIR master*/
+#define  FHC_CONTROL_LLED	0x00000040 /* 0=Left LED ON			*/
+#define  FHC_CONTROL_MLED	0x00000020 /* 1=Middle LED ON			*/
+#define  FHC_CONTROL_RLED	0x00000010 /* 1=Right LED			*/
+#define  FHC_CONTROL_BPINS	0x00000003 /* Spare Bidirectional Pins		*/
+#define FHC_PREGS_BSR	0x30UL	/* FHC Board Status Register */
+#define  FHC_BSR_DA64		0x00040000 /* Port A: 0=128bit 1=64bit data path */
+#define  FHC_BSR_DB64		0x00020000 /* Port B: 0=128bit 1=64bit data path */
+#define  FHC_BSR_BID		0x0001e000 /* Board ID                           */
+#define  FHC_BSR_SA		0x00001c00 /* Port A UPA Speed (from the pins)   */
+#define  FHC_BSR_SB		0x00000380 /* Port B UPA Speed (from the pins)   */
+#define  FHC_BSR_NDIAG		0x00000040 /* Not in Diag Mode                   */
+#define  FHC_BSR_NTBED		0x00000020 /* Not in TestBED Mode                */
+#define  FHC_BSR_NIA		0x0000001c /* Jumper, bit 18 in PROM space       */
+#define  FHC_BSR_SI		0x00000001 /* Spare input pin value              */
+#define FHC_PREGS_ECC	0x40UL	/* FHC ECC Control Register (16 bits) */
+#define FHC_PREGS_JCTRL	0xf0UL	/* FHC JTAG Control Register */
+#define  FHC_JTAG_CTRL_MENAB	0x80000000 /* Indicates this is JTAG Master	 */
+#define  FHC_JTAG_CTRL_MNONE	0x40000000 /* Indicates no JTAG Master present	 */
+#define FHC_PREGS_JCMD	0x100UL	/* FHC JTAG Command Register */
+	unsigned long			ireg;	/* FHC IGN reg */
+#define FHC_IREG_IGN	0x00UL	/* This FHC's IGN */
+	unsigned long			ffregs;	/* FHC fanfail regs */
+#define FHC_FFREGS_IMAP	0x00UL	/* FHC Fanfail IMAP */
+#define FHC_FFREGS_ICLR	0x10UL	/* FHC Fanfail ICLR */
+	unsigned long			sregs;	/* FHC system regs */
+#define FHC_SREGS_IMAP	0x00UL	/* FHC System IMAP */
+#define FHC_SREGS_ICLR	0x10UL	/* FHC System ICLR */
+	unsigned long			uregs;	/* FHC uart regs */
+#define FHC_UREGS_IMAP	0x00UL	/* FHC Uart IMAP */
+#define FHC_UREGS_ICLR	0x10UL	/* FHC Uart ICLR */
+	unsigned long			tregs;	/* FHC TOD regs */
+#define FHC_TREGS_IMAP	0x00UL	/* FHC TOD IMAP */
+#define FHC_TREGS_ICLR	0x10UL	/* FHC TOD ICLR */
+};
+
+struct linux_fhc {
+	struct linux_fhc		*next;
+	struct linux_central		*parent;	/* NULL if not central FHC */
+	struct fhc_regs			fhc_regs;
+	int				board;
+	int				jtag_master;
+	struct device_node		*prom_node;
+
+	struct linux_prom_ranges	fhc_ranges[PROMREG_MAX];
+	int				num_fhc_ranges;
+};
+
+#endif /* !(_SPARC64_FHC_H) */

include/asm-sparc/fpumacro.h

+/* fpumacro.h: FPU related macros.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_FPUMACRO_H
+#define _SPARC64_FPUMACRO_H
+
+#include <asm/asi.h>
+#include <asm/visasm.h>
+
+struct fpustate {
+	u32	regs[64];
+};
+
+#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs)
+
+static inline unsigned long fprs_read(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd %%fprs, %0" : "=r" (retval));
+
+	return retval;
+}
+
+static inline void fprs_write(unsigned long val)
+{
+	__asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val));
+}
+
+#endif /* !(_SPARC64_FPUMACRO_H) */

include/asm-sparc/hugetlb.h

+#ifndef _ASM_SPARC64_HUGETLB_H
+#define _ASM_SPARC64_HUGETLB_H
+
+#include <asm/page.h>
+
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep);
+
+void hugetlb_prefault_arch_hook(struct mm_struct *mm);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_SPARC64_HUGETLB_H */

include/asm-sparc/hvtramp.h

+#ifndef _SPARC64_HVTRAP_H
+#define _SPARC64_HVTRAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct hvtramp_mapping {
+	__u64		vaddr;
+	__u64		tte;
+};
+
+struct hvtramp_descr {
+	__u32			cpu;
+	__u32			num_mappings;
+	__u64			fault_info_va;
+	__u64			fault_info_pa;
+	__u64			thread_reg;
+	struct hvtramp_mapping	maps[1];
+};
+
+extern void hv_cpu_startup(unsigned long hvdescr_pa);
+
+#endif
+
+#define HVTRAMP_DESCR_CPU		0x00
+#define HVTRAMP_DESCR_NUM_MAPPINGS	0x04
+#define HVTRAMP_DESCR_FAULT_INFO_VA	0x08
+#define HVTRAMP_DESCR_FAULT_INFO_PA	0x10
+#define HVTRAMP_DESCR_THREAD_REG	0x18
+#define HVTRAMP_DESCR_MAPS		0x20
+
+#define HVTRAMP_MAPPING_VADDR		0x00
+#define HVTRAMP_MAPPING_TTE		0x08
+#define HVTRAMP_MAPPING_SIZE		0x10
+
+#endif /* _SPARC64_HVTRAP_H */

include/asm-sparc/intr_queue.h

+#ifndef _SPARC64_INTR_QUEUE_H
+#define _SPARC64_INTR_QUEUE_H
+
+/* Sun4v interrupt queue registers, accessed via ASI_QUEUE.  */
+
+#define INTRQ_CPU_MONDO_HEAD	  0x3c0 /* CPU mondo head	          */
+#define INTRQ_CPU_MONDO_TAIL	  0x3c8 /* CPU mondo tail	          */
+#define INTRQ_DEVICE_MONDO_HEAD	  0x3d0 /* Device mondo head	          */
+#define INTRQ_DEVICE_MONDO_TAIL	  0x3d8 /* Device mondo tail	          */
+#define INTRQ_RESUM_MONDO_HEAD	  0x3e0 /* Resumable error mondo head     */
+#define INTRQ_RESUM_MONDO_TAIL	  0x3e8 /* Resumable error mondo tail     */
+#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */
+#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */
+
+#endif /* !(_SPARC64_INTR_QUEUE_H) */

include/asm-sparc/kprobes.h

+#ifndef _SPARC64_KPROBES_H
+#define _SPARC64_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/percpu.h>
+
+typedef u32 kprobe_opcode_t;
+
+#define BREAKPOINT_INSTRUCTION   0x91d02070 /* ta 0x70 */
+#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */
+#define MAX_INSN_SIZE 2
+
+#define kretprobe_blacklist_size 0
+
+#define arch_remove_kprobe(p)	do {} while (0)
+
+#define flush_insn_slot(p)		\
+do { 	flushi(&(p)->ainsn.insn[0]);	\
+	flushi(&(p)->ainsn.insn[1]);	\
+} while (0)
+
+void kretprobe_trampoline(void);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long orig_tnpc;
+	unsigned long orig_tstate_pil;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_orig_tnpc;
+	unsigned long kprobe_orig_tstate_pil;
+	struct pt_regs jprobe_saved_regs;
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+#endif /* _SPARC64_KPROBES_H */

include/asm-sparc/ldc.h

+#ifndef _SPARC64_LDC_H
+#define _SPARC64_LDC_H
+
+#include <asm/hypervisor.h>
+
+extern int ldom_domaining_enabled;
+extern void ldom_set_var(const char *var, const char *value);
+extern void ldom_reboot(const char *boot_command);
+extern void ldom_power_off(void);
+
+/* The event handler will be evoked when link state changes
+ * or data becomes available on the receive side.
+ *
+ * For non-RAW links, if the LDC_EVENT_RESET event arrives the
+ * driver should reset all of it's internal state and reinvoke
+ * ldc_connect() to try and bring the link up again.
+ *
+ * For RAW links, ldc_connect() is not used.  Instead the driver
+ * just waits for the LDC_EVENT_UP event.
+ */
+struct ldc_channel_config {
+	void (*event)(void *arg, int event);
+
+	u32			mtu;
+	unsigned int		rx_irq;
+	unsigned int		tx_irq;
+	u8			mode;
+#define LDC_MODE_RAW		0x00
+#define LDC_MODE_UNRELIABLE	0x01
+#define LDC_MODE_RESERVED	0x02
+#define LDC_MODE_STREAM		0x03
+
+	u8			debug;
+#define LDC_DEBUG_HS		0x01
+#define LDC_DEBUG_STATE		0x02
+#define LDC_DEBUG_RX		0x04
+#define LDC_DEBUG_TX		0x08
+#define LDC_DEBUG_DATA		0x10
+};
+
+#define LDC_EVENT_RESET		0x01
+#define LDC_EVENT_UP		0x02
+#define LDC_EVENT_DATA_READY	0x04
+
+#define LDC_STATE_INVALID	0x00
+#define LDC_STATE_INIT		0x01
+#define LDC_STATE_BOUND		0x02
+#define LDC_STATE_READY		0x03
+#define LDC_STATE_CONNECTED	0x04
+
+struct ldc_channel;
+
+/* Allocate state for a channel.  */
+extern struct ldc_channel *ldc_alloc(unsigned long id,
+				     const struct ldc_channel_config *cfgp,
+				     void *event_arg);
+
+/* Shut down and free state for a channel.  */
+extern void ldc_free(struct ldc_channel *lp);
+
+/* Register TX and RX queues of the link with the hypervisor.  */
+extern int ldc_bind(struct ldc_channel *lp, const char *name);
+
+/* For non-RAW protocols we need to complete a handshake before
+ * communication can proceed.  ldc_connect() does that, if the
+ * handshake completes successfully, an LDC_EVENT_UP event will
+ * be sent up to the driver.
+ */
+extern int ldc_connect(struct ldc_channel *lp);
+extern int ldc_disconnect(struct ldc_channel *lp);
+
+extern int ldc_state(struct ldc_channel *lp);
+
+/* Read and write operations.  Only valid when the link is up.  */
+extern int ldc_write(struct ldc_channel *lp, const void *buf,
+		     unsigned int size);
+extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size);
+
+#define LDC_MAP_SHADOW	0x01
+#define LDC_MAP_DIRECT	0x02
+#define LDC_MAP_IO	0x04
+#define LDC_MAP_R	0x08
+#define LDC_MAP_W	0x10
+#define LDC_MAP_X	0x20
+#define LDC_MAP_RW	(LDC_MAP_R | LDC_MAP_W)
+#define LDC_MAP_RWX	(LDC_MAP_R | LDC_MAP_W | LDC_MAP_X)
+#define LDC_MAP_ALL	0x03f
+
+struct ldc_trans_cookie {
+	u64			cookie_addr;
+	u64			cookie_size;
+};
+
+struct scatterlist;
+extern int ldc_map_sg(struct ldc_channel *lp,
+		      struct scatterlist *sg, int num_sg,
+		      struct ldc_trans_cookie *cookies, int ncookies,
+		      unsigned int map_perm);
+
+extern int ldc_map_single(struct ldc_channel *lp,
+			  void *buf, unsigned int len,
+			  struct ldc_trans_cookie *cookies, int ncookies,
+			  unsigned int map_perm);
+
+extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies,
+		      int ncookies);
+
+extern int ldc_copy(struct ldc_channel *lp, int copy_dir,
+		    void *buf, unsigned int len, unsigned long offset,
+		    struct ldc_trans_cookie *cookies, int ncookies);
+
+static inline int ldc_get_dring_entry(struct ldc_channel *lp,
+				      void *buf, unsigned int len,
+				      unsigned long offset,
+				      struct ldc_trans_cookie *cookies,
+				      int ncookies)
+{
+	return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies);
+}
+
+static inline int ldc_put_dring_entry(struct ldc_channel *lp,
+				      void *buf, unsigned int len,
+				      unsigned long offset,
+				      struct ldc_trans_cookie *cookies,
+				      int ncookies)
+{
+	return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies);
+}
+
+extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len,
+				 struct ldc_trans_cookie *cookies,
+				 int *ncookies, unsigned int map_perm);
+
+extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf,
+			       unsigned int len,
+			       struct ldc_trans_cookie *cookies, int ncookies);
+
+#endif /* _SPARC64_LDC_H */

include/asm-sparc/lmb.h

+#ifndef _SPARC64_LMB_H
+#define _SPARC64_LMB_H
+
+#include <asm/oplib.h>
+
+#define LMB_DBG(fmt...) prom_printf(fmt)
+
+#define LMB_REAL_LIMIT	0
+
+#endif /* !(_SPARC64_LMB_H) */

include/asm-sparc/lsu.h

+#ifndef _SPARC64_LSU_H
+#define _SPARC64_LSU_H
+
+#include <linux/const.h>
+
+/* LSU Control Register */
+#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/
+#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/
+#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/
+#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/
+#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/
+#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/
+#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables.     */
+#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable.         */
+#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable.  */
+#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable.       */
+#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/
+
+#endif /* !(_SPARC64_LSU_H) */

include/asm-sparc/mdesc.h

+#ifndef _SPARC64_MDESC_H
+#define _SPARC64_MDESC_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/prom.h>
+
+struct mdesc_handle;
+
+/* Machine description operations are to be surrounded by grab and
+ * release calls.  The mdesc_handle returned from the grab is
+ * the first argument to all of the operational calls that work
+ * on mdescs.
+ */
+extern struct mdesc_handle *mdesc_grab(void);
+extern void mdesc_release(struct mdesc_handle *);
+
+#define MDESC_NODE_NULL		(~(u64)0)
+
+extern u64 mdesc_node_by_name(struct mdesc_handle *handle,
+			      u64 from_node, const char *name);
+#define mdesc_for_each_node_by_name(__hdl, __node, __name) \
+	for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \
+	     (__node) != MDESC_NODE_NULL; \
+	     __node = mdesc_node_by_name(__hdl, __node, __name))
+
+/* Access to property values returned from mdesc_get_property() are
+ * only valid inside of a mdesc_grab()/mdesc_release() sequence.
+ * Once mdesc_release() is called, the memory backed up by these
+ * pointers may reference freed up memory.
+ *
+ * Therefore callers must make copies of any property values
+ * they need.
+ *
+ * These same rules apply to mdesc_node_name().
+ */
+extern const void *mdesc_get_property(struct mdesc_handle *handle,
+				      u64 node, const char *name, int *lenp);
+extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node);
+
+/* MD arc iteration, the standard sequence is:
+ *
+ *	unsigned long arc;
+ *	mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) {
+ *		unsigned long target = mdesc_arc_target(handle, arc);
+ *		...
+ *	}
+ */
+
+#define MDESC_ARC_TYPE_FWD	"fwd"
+#define MDESC_ARC_TYPE_BACK	"back"
+
+extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from,
+			  const char *arc_type);
+#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \
+	for (__arc = mdesc_next_arc(__hdl, __node, __type); \
+	     (__arc) != MDESC_NODE_NULL; \
+	     __arc = mdesc_next_arc(__hdl, __arc, __type))
+
+extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc);
+
+extern void mdesc_update(void);
+
+struct mdesc_notifier_client {
+	void (*add)(struct mdesc_handle *handle, u64 node);
+	void (*remove)(struct mdesc_handle *handle, u64 node);
+
+	const char			*node_name;
+	struct mdesc_notifier_client	*next;
+};
+
+extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
+
+extern void mdesc_fill_in_cpu_data(cpumask_t mask);
+
+extern void sun4v_mdesc_init(void);
+
+#endif

include/asm-sparc/mmzone.h

+#ifndef _SPARC64_MMZONE_H
+#define _SPARC64_MMZONE_H
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+extern struct pglist_data *node_data[];
+
+#define NODE_DATA(nid)		(node_data[nid])
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
+
+extern int numa_cpu_lookup_table[];
+extern cpumask_t numa_cpumask_lookup_table[];
+
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* _SPARC64_MMZONE_H */

include/asm-sparc/ns87303.h

+/* ns87303.h: Configuration Register Description for the
+ *            National Semiconductor PC87303 (SuperIO).
+ *
+ * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_NS87303_H
+#define _SPARC_NS87303_H 1
+
+/*
+ * Control Register Index Values
+ */
+#define FER	0x00
+#define FAR	0x01
+#define PTR	0x02
+#define FCR	0x03
+#define PCR	0x04
+#define KRR	0x05
+#define PMC	0x06
+#define TUP	0x07
+#define SID	0x08
+#define ASC	0x09
+#define CS0CF0	0x0a
+#define CS0CF1	0x0b
+#define CS1CF0	0x0c
+#define CS1CF1	0x0d
+
+/* Function Enable Register (FER) bits */
+#define FER_EDM		0x10	/* Encoded Drive and Motor pin information   */
+
+/* Function Address Register (FAR) bits */
+#define FAR_LPT_MASK	0x03
+#define FAR_LPTB	0x00
+#define FAR_LPTA	0x01
+#define FAR_LPTC	0x02
+
+/* Power and Test Register (PTR) bits */
+#define PTR_LPTB_IRQ7	0x08
+#define PTR_LEVEL_IRQ	0x80	/* When not ECP/EPP: Use level IRQ           */
+#define PTR_LPT_REG_DIR	0x80	/* When ECP/EPP: LPT CTR controlls direction */
+				/*               of the parallel port	     */
+
+/* Function Control Register (FCR) bits */
+#define FCR_LDE		0x10	/* Logical Drive Exchange                    */
+#define FCR_ZWS_ENA	0x20	/* Enable short host read/write in ECP/EPP   */
+
+/* Printer Control Register (PCR) bits */
+#define PCR_EPP_ENABLE	0x01
+#define PCR_EPP_IEEE	0x02	/* Enable EPP Version 1.9 (IEEE 1284)        */
+#define PCR_ECP_ENABLE	0x04
+#define PCR_ECP_CLK_ENA	0x08	/* If 0 ECP Clock is stopped on Power down   */
+#define PCR_IRQ_POLAR	0x20	/* If 0 IRQ is level high or negative pulse, */
+				/* if 1 polarity is inverted                 */
+#define PCR_IRQ_ODRAIN	0x40	/* If 1, IRQ is open drain                   */
+
+/* Tape UARTs and Parallel Port Config Register (TUP) bits */
+#define TUP_EPP_TIMO	0x02	/* Enable EPP timeout IRQ                    */
+
+/* Advanced SuperIO Config Register (ASC) bits */
+#define ASC_LPT_IRQ7	0x01	/* Always use IRQ7 for LPT                  */
+#define ASC_DRV2_SEL	0x02	/* Logical Drive Exchange controlled by TDR  */
+
+#define FER_RESERVED	0x00
+#define FAR_RESERVED	0x00
+#define PTR_RESERVED	0x73
+#define FCR_RESERVED	0xc4
+#define PCR_RESERVED	0x10
+#define KRR_RESERVED	0x00
+#define PMC_RESERVED	0x98
+#define TUP_RESERVED	0xfb
+#define SIP_RESERVED	0x00
+#define ASC_RESERVED	0x18
+#define CS0CF0_RESERVED	0x00
+#define CS0CF1_RESERVED	0x08
+#define CS1CF0_RESERVED	0x00
+#define CS1CF1_RESERVED	0x08
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+extern spinlock_t ns87303_lock;
+
+static inline int ns87303_modify(unsigned long port, unsigned int index,
+				     unsigned char clr, unsigned char set)
+{
+	static unsigned char reserved[] = {
+		FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
+		PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
+		SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
+		CS1CF0_RESERVED, CS1CF1_RESERVED
+	};
+	unsigned long flags;
+	unsigned char value;
+
+	if (index > 0x0d)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ns87303_lock, flags);
+
+	outb(index, port);
+	value = inb(port + 1);
+	value &= ~(reserved[index] | clr);
+	value |= set;
+	outb(value, port + 1);
+	outb(value, port + 1);
+
+	spin_unlock_irqrestore(&ns87303_lock, flags);
+
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC_NS87303_H) */

include/asm-sparc/pil.h

+#ifndef _SPARC64_PIL_H
+#define _SPARC64_PIL_H
+
+/* To avoid some locking problems, we hard allocate certain PILs
+ * for SMP cross call messages that must do a etrap/rtrap.
+ *
+ * A local_irq_disable() does not block the cross call delivery, so
+ * when SMP locking is an issue we reschedule the event into a PIL
+ * interrupt which is blocked by local_irq_disable().
+ *
+ * In fact any XCALL which has to etrap/rtrap has a problem because
+ * it is difficult to prevent rtrap from running BH's, and that would
+ * need to be done if the XCALL arrived while %pil==15.
+ */
+#define PIL_SMP_CALL_FUNC	1
+#define PIL_SMP_RECEIVE_SIGNAL	2
+#define PIL_SMP_CAPTURE		3
+#define PIL_SMP_CTX_NEW_VERSION	4
+#define PIL_DEVICE_IRQ		5
+
+#endif /* !(_SPARC64_PIL_H) */

include/asm-sparc/reboot.h

+#ifndef _SPARC64_REBOOT_H
+#define _SPARC64_REBOOT_H
+
+extern void machine_alt_power_off(void);
+
+#endif /* _SPARC64_REBOOT_H */

include/asm-sparc/rwsem-const.h

+/* rwsem-const.h: RW semaphore counter constants.  */
+#ifndef _SPARC64_RWSEM_CONST_H
+#define _SPARC64_RWSEM_CONST_H
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		0xffff0000
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+#endif /* _SPARC64_RWSEM_CONST_H */

include/asm-sparc/rwsem.h

+/*
+ * rwsem.h: R/W semaphores implemented using CAS
+ *
+ * Written by David S. Miller (davem@redhat.com), 2001.
+ * Derived from asm-i386/rwsem.h
+ */
+#ifndef _SPARC64_RWSEM_H
+#define _SPARC64_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/rwsem-const.h>
+
+struct rwsem_waiter;
+
+struct rw_semaphore {
+	signed int count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
+  __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)						\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__init_rwsem((sem), #sem, &__key);			\
+} while (0)
+
+extern void __down_read(struct rw_semaphore *sem);
+extern int __down_read_trylock(struct rw_semaphore *sem);
+extern void __down_write(struct rw_semaphore *sem);
+extern int __down_write_trylock(struct rw_semaphore *sem);
+extern void __up_read(struct rw_semaphore *sem);
+extern void __up_write(struct rw_semaphore *sem);
+extern void __downgrade_write(struct rw_semaphore *sem);
+
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	__down_write(sem);
+}
+
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC64_RWSEM_H */

include/asm-sparc/scratchpad.h

+#ifndef _SPARC64_SCRATCHPAD_H
+#define _SPARC64_SCRATCHPAD_H
+
+/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD.  */
+
+#define SCRATCHPAD_MMU_MISS	0x00 /* Shared with OBP - set by OBP	    */
+#define SCRATCHPAD_CPUID	0x08 /* Shared with OBP - set by hypervisor */
+#define SCRATCHPAD_UTSBREG1	0x10
+#define SCRATCHPAD_UTSBREG2	0x18
+	/* 0x20 and 0x28, hypervisor only... */
+#define SCRATCHPAD_UNUSED1	0x30
+#define SCRATCHPAD_UNUSED2	0x38 /* Reserved for OBP		    */
+
+#endif /* !(_SPARC64_SCRATCHPAD_H) */

include/asm-sparc/seccomp.h

+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h> /* already defines TIF_32BIT */
+
+#ifndef TIF_32BIT
+#error "unexpected TIF_32BIT on sparc64"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif /* _ASM_SECCOMP_H */

include/asm-sparc/sparsemem.h

+#ifndef _SPARC64_SPARSEMEM_H
+#define _SPARC64_SPARSEMEM_H
+
+#ifdef __KERNEL__
+
+#define SECTION_SIZE_BITS       30
+#define MAX_PHYSADDR_BITS       42
+#define MAX_PHYSMEM_BITS        42
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(_SPARC64_SPARSEMEM_H) */

include/asm-sparc/stacktrace.h

+#ifndef _SPARC64_STACKTRACE_H
+#define _SPARC64_STACKTRACE_H
+
+extern void stack_trace_flush(void);
+
+#endif /* _SPARC64_STACKTRACE_H */