提交 9ef9ac51 编写于 作者: B Ben Dooks 提交者: Jeff Garzik

[PATCH] DM9000 - spinlock fixes

Fix DM9000 driver usage of spinlocks, which mainly came to light
when running a kernel with spinlock debugging. These come down to:

1) Un-initialised spin lock

2) Several cases of using  spin_xxx(lock) and not spin_xxx(&lock)

3) move the locking around the phy reg for read/write to only
   keep the lock when actually reading or writing to the phy.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
上级 a4cf0761
......@@ -48,6 +48,10 @@
* net_device_stats
* * introduced tx_timeout function
* * reworked locking
*
* 01-Jul-2005 Ben Dooks <ben@simtec.co.uk>
* * fixed spinlock call without pointer
* * ensure spinlock is initialised
*/
#include <linux/module.h>
......@@ -322,7 +326,7 @@ static void dm9000_timeout(struct net_device *dev)
/* Save previous register address */
reg_save = readb(db->io_addr);
spin_lock_irqsave(db->lock,flags);
spin_lock_irqsave(&db->lock,flags);
netif_stop_queue(dev);
dm9000_reset(db);
......@@ -333,7 +337,7 @@ static void dm9000_timeout(struct net_device *dev)
/* Restore previous register address */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(db->lock,flags);
spin_unlock_irqrestore(&db->lock,flags);
}
......@@ -405,6 +409,8 @@ dm9000_probe(struct device *dev)
db = (struct board_info *) ndev->priv;
memset(db, 0, sizeof (*db));
spin_lock_init(&db->lock);
if (pdev->num_resources < 2) {
ret = -ENODEV;
goto out;
......@@ -612,7 +618,7 @@ dm9000_open(struct net_device *dev)
/* set and active a timer process */
init_timer(&db->timer);
db->timer.expires = DM9000_TIMER_WUT * 2;
db->timer.expires = DM9000_TIMER_WUT;
db->timer.data = (unsigned long) dev;
db->timer.function = &dm9000_timer;
add_timer(&db->timer);
......@@ -864,21 +870,11 @@ dm9000_timer(unsigned long data)
{
struct net_device *dev = (struct net_device *) data;
board_info_t *db = (board_info_t *) dev->priv;
u8 reg_save;
unsigned long flags;
PRINTK3("dm9000_timer()\n");
spin_lock_irqsave(db->lock,flags);
/* Save previous register address */
reg_save = readb(db->io_addr);
mii_check_media(&db->mii, netif_msg_link(db), 0);
/* Restore previous register address */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(db->lock,flags);
/* Set timer again */
db->timer.expires = DM9000_TIMER_WUT;
add_timer(&db->timer);
......@@ -1098,9 +1094,14 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
{
board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
unsigned int reg_save;
int ret;
spin_lock_irqsave(&db->lock,flags);
/* Save previous register address */
reg_save = readb(db->io_addr);
/* Fill the phyxcer register into REG_0C */
iow(db, DM9000_EPAR, DM9000_PHY | reg);
......@@ -1111,6 +1112,9 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
/* The read data keeps on REG_0D & REG_0E */
ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
/* restore the previous address */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(&db->lock,flags);
return ret;
......@@ -1124,9 +1128,13 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
{
board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
unsigned long reg_save;
spin_lock_irqsave(&db->lock,flags);
/* Save previous register address */
reg_save = readb(db->io_addr);
/* Fill the phyxcer register into REG_0C */
iow(db, DM9000_EPAR, DM9000_PHY | reg);
......@@ -1138,6 +1146,9 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
udelay(500); /* Wait write complete */
iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
/* restore the previous address */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(&db->lock,flags);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册