x86, apic: separate 32-bit setup functionality out of apic_32.c

Impact: build fix, cleanup

A couple of arch setup callbacks were mistakenly in apic_32.c, breaking
the build.

Also simplify the code a bit.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

arch/x86/kernel/Makefile

@@ -63,7 +63,7 @@ obj-$(CONFIG_SMP)		+= setup_percpu.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic/
+obj-y				+= apic/
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o

arch/x86/kernel/apic/Makefile

@@ -2,10 +2,9 @@
 # Makefile for local APIC drivers and for the IO-APIC code
 #
 
-obj-y				:= apic.o probe_$(BITS).o ipi.o nmi.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o probe_$(BITS).o ipi.o nmi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
-obj-$
 
 ifeq ($(CONFIG_X86_64),y)
 obj-y				+= apic_flat_64.o

arch/x86/kernel/apic/probe_32.c

@@ -47,7 +47,22 @@
 
 int no_broadcast = DEFAULT_SEND_IPI;
 
-#ifdef CONFIG_X86_LOCAL_APIC
+static __init int no_ipi_broadcast(char *str)
+{
+	get_option(&str, &no_broadcast);
+	pr_info("Using %s mode\n",
+		no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
+	return 1;
+}
+__setup("no_ipi_broadcast=", no_ipi_broadcast);
+
+static int __init print_ipi_mode(void)
+{
+	pr_info("Using IPI %s mode\n",
+		no_broadcast ? "No-Shortcut" : "Shortcut");
+	return 0;
+}
+late_initcall(print_ipi_mode);
 
 void default_setup_apic_routing(void)
 {
@@ -279,146 +294,3 @@ int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	}
 	return 0;
 }
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *	Perform any necessary interrupt initialisation prior to setting up
- *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *	interrupts should be initialised here if the machine emulates a PC
- *	in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
-	if (x86_quirks->arch_pre_intr_init) {
-		if (x86_quirks->arch_pre_intr_init())
-			return;
-	}
-	init_ISA_irqs();
-}
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- *	Fill in any interrupts that may have been left out by the general
- *	init_IRQ() routine.  interrupts having to do with the machine rather
- *	than the devices on the I/O bus (like APIC interrupts in intel MP
- *	systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
-	if (x86_quirks->arch_intr_init) {
-		if (x86_quirks->arch_intr_init())
-			return;
-	}
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On Voyager
- *	this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- *	Called as the final act of trap_init().  Used in VISWS to initialise
- *	the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
-	if (x86_quirks->arch_trap_init) {
-		if (x86_quirks->arch_trap_init())
-			return;
-	}
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
-	.mask = CPU_MASK_NONE,
-	.name = "timer"
-};
-
-/**
- * pre_time_init_hook - do any specific initialisations before.
- *
- **/
-void __init pre_time_init_hook(void)
-{
-	if (x86_quirks->arch_pre_time_init)
-		x86_quirks->arch_pre_time_init();
-}
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- *	Must plug the system timer interrupt source at HZ into the IRQ listed
- *	in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
-	if (x86_quirks->arch_time_init) {
-		/*
-		 * A nonzero return code does not mean failure, it means
-		 * that the architecture quirk does not want any
-		 * generic (timer) setup to be performed after this:
-		 */
-		if (x86_quirks->arch_time_init())
-			return;
-	}
-
-	irq0.mask = cpumask_of_cpu(0);
-	setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
- *	along the MCA bus.  Use this to hook into that chain if you will need
- *	it.
- **/
-void mca_nmi_hook(void)
-{
-	/*
-	 * If I recall correctly, there's a whole bunch of other things that
-	 * we can do to check for NMI problems, but that's all I know about
-	 * at the moment.
-	 */
-	pr_warning("NMI generated from unknown source!\n");
-}
-#endif
-
-static __init int no_ipi_broadcast(char *str)
-{
-	get_option(&str, &no_broadcast);
-	pr_info("Using %s mode\n",
-		no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
-	return 1;
-}
-__setup("no_ipi_broadcast=", no_ipi_broadcast);
-
-static int __init print_ipi_mode(void)
-{
-	pr_info("Using IPI %s mode\n",
-		no_broadcast ? "No-Shortcut" : "Shortcut");
-	return 0;
-}
-
-late_initcall(print_ipi_mode);
-

arch/x86/kernel/setup.c

@@ -985,4 +985,128 @@ void __init setup_arch(char **cmdline_p)
 #endif
 }
 
+#ifdef CONFIG_X86_32
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ *	Perform any necessary interrupt initialisation prior to setting up
+ *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
+ *	interrupts should be initialised here if the machine emulates a PC
+ *	in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+	if (x86_quirks->arch_pre_intr_init) {
+		if (x86_quirks->arch_pre_intr_init())
+			return;
+	}
+	init_ISA_irqs();
+}
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ *	Fill in any interrupts that may have been left out by the general
+ *	init_IRQ() routine.  interrupts having to do with the machine rather
+ *	than the devices on the I/O bus (like APIC interrupts in intel MP
+ *	systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+	if (x86_quirks->arch_intr_init) {
+		if (x86_quirks->arch_intr_init())
+			return;
+	}
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ *	generally used to activate any machine specific identification
+ *	routines that may be needed before setup_arch() runs.  On Voyager
+ *	this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ *	Called as the final act of trap_init().  Used in VISWS to initialise
+ *	the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+	if (x86_quirks->arch_trap_init) {
+		if (x86_quirks->arch_trap_init())
+			return;
+	}
+}
+
+static struct irqaction irq0  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+	.mask = CPU_MASK_NONE,
+	.name = "timer"
+};
+
+/**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+	if (x86_quirks->arch_pre_time_init)
+		x86_quirks->arch_pre_time_init();
+}
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ *	Must plug the system timer interrupt source at HZ into the IRQ listed
+ *	in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+	if (x86_quirks->arch_time_init) {
+		/*
+		 * A nonzero return code does not mean failure, it means
+		 * that the architecture quirk does not want any
+		 * generic (timer) setup to be performed after this:
+		 */
+		if (x86_quirks->arch_time_init())
+			return;
+	}
+
+	irq0.mask = cpumask_of_cpu(0);
+	setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
+ *	along the MCA bus.  Use this to hook into that chain if you will need
+ *	it.
+ **/
+void mca_nmi_hook(void)
+{
+	/*
+	 * If I recall correctly, there's a whole bunch of other things that
+	 * we can do to check for NMI problems, but that's all I know about
+	 * at the moment.
+	 */
+	pr_warning("NMI generated from unknown source!\n");
+}
+#endif /* CONFIG_MCA */
 
+#endif /* CONFIG_X86_32 */