提交 9a60731d 编写于 作者: S Stefan Richter

firewire: prefix modules with firewire- instead of fw-

Of course everybody immediately associates "fw-" with FireWire, not
firmware or firewall or whatever.  But "firewire-" has a nice ring to
it too.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: NKristian Hoegsberg <krh@bitplanet.net>
上级 ec839e43
......@@ -18,7 +18,7 @@ config FIREWIRE
your IEEE 1394 adapter.
To compile this driver as a module, say M here: the module will be
called fw-core.
called firewire-core.
This is the "JUJU" FireWire stack, an alternative implementation
designed for robustness and simplicity. You can build either this
......@@ -34,11 +34,11 @@ config FIREWIRE_OHCI
is the only chipset in use, so say Y here.
To compile this driver as a module, say M here: The module will be
called fw-ohci.
called firewire-ohci.
If you also build ohci1394 of the classic IEEE 1394 driver stack,
blacklist either ohci1394 or fw-ohci to let hotplug load the desired
driver.
blacklist either ohci1394 or firewire-ohci to let hotplug load the
desired driver.
config FIREWIRE_SBP2
tristate "Support for storage devices (SBP-2 protocol driver)"
......@@ -50,12 +50,12 @@ config FIREWIRE_SBP2
like scanners.
To compile this driver as a module, say M here: The module will be
called fw-sbp2.
called firewire-sbp2.
You should also enable support for disks, CD-ROMs, etc. in the SCSI
configuration section.
If you also build sbp2 of the classic IEEE 1394 driver stack,
blacklist either sbp2 or fw-sbp2 to let hotplug load the desired
driver.
blacklist either sbp2 or firewire-sbp2 to let hotplug load the
desired driver.
......@@ -2,9 +2,11 @@
# Makefile for the Linux IEEE 1394 implementation
#
fw-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
fw-device.o fw-cdev.o
firewire-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
fw-device.o fw-cdev.o
firewire-ohci-y += fw-ohci.o
firewire-sbp2-y += fw-sbp2.o
obj-$(CONFIG_FIREWIRE) += fw-core.o
obj-$(CONFIG_FIREWIRE_OHCI) += fw-ohci.o
obj-$(CONFIG_FIREWIRE_SBP2) += fw-sbp2.o
obj-$(CONFIG_FIREWIRE) += firewire-core.o
obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册