提交 98954df6 编写于 作者: L Lennert Buytenhek 提交者: Russell King

[ARM] 3816/1: iop3xx: rename config symbols

Rename CONFIG_ARCH_IOP321 to CONFIG_ARCH_IOP32X and
CONFIG_ARCH_IOP331 to CONFIG_ARCH_IOP33X.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 cdf3f8e0
......@@ -42,7 +42,7 @@
add \rb, \rb, #0x00010000 @ Ser1
#endif
.endm
#elif defined(CONFIG_ARCH_IOP331)
#elif defined(CONFIG_ARCH_IOP33X)
.macro loadsp, rb
mov \rb, #0xff000000
orr \rb, \rb, #0x00ff0000
......
......@@ -93,8 +93,8 @@ CONFIG_ARCH_IQ31244=y
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
CONFIG_ARCH_EP80219=y
CONFIG_ARCH_IOP321=y
# CONFIG_ARCH_IOP331 is not set
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
#
# IOP3xx Chipset Features
......
......@@ -94,8 +94,8 @@ CONFIG_ARCH_IQ31244=y
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
CONFIG_ARCH_IOP321=y
# CONFIG_ARCH_IOP331 is not set
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
#
# IOP3xx Chipset Features
......
......@@ -93,8 +93,8 @@ CONFIG_ARCH_IQ80321=y
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
CONFIG_ARCH_IOP321=y
# CONFIG_ARCH_IOP331 is not set
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
#
# IOP3xx Chipset Features
......
......@@ -93,7 +93,7 @@ CONFIG_ARCH_IOP3XX=y
CONFIG_ARCH_IQ80331=y
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
CONFIG_ARCH_IOP331=y
CONFIG_ARCH_IOP33X=y
#
# IOP3xx Chipset Features
......
......@@ -93,7 +93,7 @@ CONFIG_ARCH_IOP3XX=y
# CONFIG_ARCH_IQ80331 is not set
CONFIG_MACH_IQ80332=y
# CONFIG_ARCH_EP80219 is not set
CONFIG_ARCH_IOP331=y
CONFIG_ARCH_IOP33X=y
#
# IOP3xx Chipset Features
......
......@@ -6,48 +6,48 @@ comment "IOP3xx Platform Types"
config ARCH_IQ80321
bool "Enable support for IQ80321"
select ARCH_IOP321
select ARCH_IOP32X
help
Say Y here if you want to run your kernel on the Intel IQ80321
evaluation kit for the IOP321 chipset.
config ARCH_IQ31244
bool "Enable support for IQ31244"
select ARCH_IOP321
select ARCH_IOP32X
help
Say Y here if you want to run your kernel on the Intel IQ31244
evaluation kit for the IOP321 chipset.
config ARCH_IQ80331
bool "Enable support for IQ80331"
select ARCH_IOP331
select ARCH_IOP33X
help
Say Y here if you want to run your kernel on the Intel IQ80331
evaluation kit for the IOP331 chipset.
config MACH_IQ80332
bool "Enable support for IQ80332"
select ARCH_IOP331
select ARCH_IOP33X
help
Say Y here if you want to run your kernel on the Intel IQ80332
evaluation kit for the IOP332 chipset.
config ARCH_EP80219
bool "Enable support for EP80219"
select ARCH_IOP321
select ARCH_IOP32X
select ARCH_IQ31244
help
Say Y here if you want to run your kernel on the Intel EP80219
evaluation kit for the Intel 80219 chipset (a IOP321 variant).
# Which IOP variant are we running?
config ARCH_IOP321
config ARCH_IOP32X
bool
help
The IQ80321 uses the IOP321 variant.
The IQ31244 and EP80219 uses the IOP321 variant.
config ARCH_IOP331
config ARCH_IOP33X
bool
default ARCH_IQ80331
help
......@@ -57,7 +57,7 @@ comment "IOP3xx Chipset Features"
config IOP331_STEPD
bool "Chip stepping D of the IOP80331 processor or IOP80333"
depends on (ARCH_IOP331)
depends on ARCH_IOP33X
help
Say Y here if you have StepD of the IOP80331 or IOP8033
based platforms.
......
......@@ -10,9 +10,9 @@ obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_ARCH_IOP321) += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
obj-$(CONFIG_ARCH_IOP32X) += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
obj-$(CONFIG_ARCH_IOP331) += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
obj-$(CONFIG_ARCH_IOP33X) += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
......
zreladdr-y := 0xa0008000
params_phys-y := 0xa0000100
initrd_phys-y := 0xa0800000
ifeq ($(CONFIG_ARCH_IOP331),y)
ifeq ($(CONFIG_ARCH_IOP33X),y)
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
......
......@@ -177,7 +177,7 @@ void __init iop331_map_io(void)
iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc));
}
#ifdef CONFIG_ARCH_IOP331
#ifdef CONFIG_ARCH_IOP33X
extern void iop331_init_irq(void);
extern struct sys_timer iop331_timer;
#endif
......
......@@ -36,10 +36,10 @@
#ifdef CONFIG_ARCH_IOP310
#define XSCALE_PMU_IRQ IRQ_XS80200_PMU
#endif
#ifdef CONFIG_ARCH_IOP321
#ifdef CONFIG_ARCH_IOP32X
#define XSCALE_PMU_IRQ IRQ_IOP321_CORE_PMU
#endif
#ifdef CONFIG_ARCH_IOP331
#ifdef CONFIG_ARCH_IOP33X
#define XSCALE_PMU_IRQ IRQ_IOP331_CORE_PMU
#endif
#ifdef CONFIG_ARCH_PXA
......
......@@ -82,9 +82,9 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
/*
* Every time unit enable is asserted, GPOD needs to be cleared
* on IOP321 to avoid data corruption on the bus.
* on IOP32X to avoid data corruption on the bus.
*/
#ifdef CONFIG_ARCH_IOP321
#ifdef CONFIG_ARCH_IOP32X
#define IOP321_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */
#define IOP321_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */
......
......@@ -15,7 +15,7 @@
mov \rx, #0xfe000000 @ physical
#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
orr \rx, \rx, #0x00800000 @ location of the UART
#elif defined(CONFIG_ARCH_IOP331)
#elif defined(CONFIG_ARCH_IOP33X)
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x000fe000 @ Physical Base
......
......@@ -9,7 +9,7 @@
*/
#include <asm/arch/irqs.h>
#if defined(CONFIG_ARCH_IOP321)
#if defined(CONFIG_ARCH_IOP32X)
.macro disable_fiq
.endm
......@@ -28,7 +28,7 @@
1001:
.endm
#elif defined(CONFIG_ARCH_IOP331)
#elif defined(CONFIG_ARCH_IOP33X)
.macro disable_fiq
.endm
......
......@@ -21,7 +21,7 @@
* IOP3xx variants but behave slightly differently on each.
*/
#ifndef __ASSEMBLY__
#ifdef CONFIG_ARCH_IOP321
#ifdef CONFIG_ARCH_IOP32X
#define iop_is_321() (((processor_id & 0xfffff5e0) == 0x69052420))
#else
#define iop_is_321() 0
......
......@@ -20,7 +20,7 @@
* IOP3xx variants but behave slightly differently on each.
*/
#ifndef __ASSEMBLY__
#ifdef CONFIG_ARCH_IOP331
#ifdef CONFIG_ARCH_IOP33X
/*#define iop_is_331() ((processor_id & 0xffffffb0) == 0x69054090) */
#define iop_is_331() ((processor_id & 0xffffff30) == 0x69054010)
#else
......@@ -257,7 +257,7 @@
#define IOP331_TU_TISR (volatile u32 *)IOP331_REG_ADDR(0x000007E8)
#define IOP331_TU_WDTCR (volatile u32 *)IOP331_REG_ADDR(0x000007EC)
#if defined(CONFIG_ARCH_IOP331)
#if defined(CONFIG_ARCH_IOP33X)
#define IOP331_TICK_RATE 266000000 /* 266 MHz IB clock */
#endif
......
......@@ -12,10 +12,10 @@
/*
* Chipset-specific bits
*/
#ifdef CONFIG_ARCH_IOP321
#ifdef CONFIG_ARCH_IOP32X
#include "iop321-irqs.h"
#endif
#ifdef CONFIG_ARCH_IOP331
#ifdef CONFIG_ARCH_IOP33X
#include "iop331-irqs.h"
#endif
......@@ -10,7 +10,7 @@
/*
* Physical DRAM offset.
*/
#ifndef CONFIG_ARCH_IOP331
#ifndef CONFIG_ARCH_IOP33X
#define PHYS_OFFSET UL(0xa0000000)
#else
#define PHYS_OFFSET UL(0x00000000)
......@@ -23,12 +23,12 @@
* bus_to_virt: Used to convert an address for DMA operations
* to an address that the kernel can use.
*/
#if defined(CONFIG_ARCH_IOP321)
#if defined(CONFIG_ARCH_IOP32X)
#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0))
#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2)))
#elif defined(CONFIG_ARCH_IOP331)
#elif defined(CONFIG_ARCH_IOP33X)
#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0))
#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2)))
......
......@@ -16,11 +16,11 @@ static inline void arch_idle(void)
static inline void arch_reset(char mode)
{
#ifdef CONFIG_ARCH_IOP321
#ifdef CONFIG_ARCH_IOP32X
*IOP321_PCSR = 0x30;
#endif
#ifdef CONFIG_ARCH_IOP331
#ifdef CONFIG_ARCH_IOP33X
*IOP331_PCSR = 0x30;
#endif
......
......@@ -6,9 +6,9 @@
#include <linux/serial_reg.h>
#include <asm/hardware.h>
#ifdef CONFIG_ARCH_IOP321
#ifdef CONFIG_ARCH_IOP32X
#define UTYPE unsigned char *
#elif defined(CONFIG_ARCH_IOP331)
#elif defined(CONFIG_ARCH_IOP33X)
#define UTYPE u32 *
#else
#error "Missing IOP3xx arch type def"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册