提交 97ae60bb 编写于 作者: J Jean Delvare

hwmon: (lm90) Add support for the LM99 16 degree offset

The LM99 differs from the LM86, LM89 and LM90 in that it reports
remote temperatures (temp2) 16 degrees lower than they really are. So
far we have been cheating and handled this in userspace but it really
should be handled by the driver directly.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
上级 ec38fa2b
......@@ -8,7 +8,7 @@ Supported chips:
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM90.html
* National Semiconductor LM89
Prefix: 'lm99'
Prefix: 'lm89' (no auto-detection)
Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/mpf/LM/LM89.html
......
......@@ -12,9 +12,9 @@
* made by National Semiconductor. Both have an increased remote
* temperature measurement accuracy (1 degree), and the LM99
* additionally shifts remote temperatures (measured and limits) by 16
* degrees, which allows for higher temperatures measurement. The
* driver doesn't handle it since it can be done easily in user-space.
* degrees, which allows for higher temperatures measurement.
* Note that there is no way to differentiate between both chips.
* When device is auto-detected, the driver will assume an LM99.
*
* This driver also supports the LM86, another sensor chip made by
* National Semiconductor. It is exactly similar to the LM90 except it
......@@ -169,8 +169,8 @@ static const struct i2c_device_id lm90_id[] = {
{ "adt7461", adt7461 },
{ "lm90", lm90 },
{ "lm86", lm86 },
{ "lm89", lm99 },
{ "lm99", lm99 }, /* Missing temperature offset */
{ "lm89", lm86 },
{ "lm99", lm99 },
{ "max6646", max6646 },
{ "max6647", max6646 },
{ "max6649", max6646 },
......@@ -366,6 +366,10 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
else
temp = temp_from_s8(data->temp8[attr->index]);
/* +16 degrees offset for temp2 for the LM99 */
if (data->kind == lm99 && attr->index == 3)
temp += 16000;
return sprintf(buf, "%d\n", temp);
}
......@@ -385,6 +389,10 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
/* +16 degrees offset for temp2 for the LM99 */
if (data->kind == lm99 && attr->index == 3)
val -= 16000;
mutex_lock(&data->update_lock);
if (data->kind == adt7461)
data->temp8[nr] = temp_to_u8_adt7461(data, val);
......@@ -411,6 +419,10 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
else
temp = temp_from_s16(data->temp11[attr->index]);
/* +16 degrees offset for temp2 for the LM99 */
if (data->kind == lm99 && attr->index <= 2)
temp += 16000;
return sprintf(buf, "%d\n", temp);
}
......@@ -432,6 +444,10 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
/* +16 degrees offset for temp2 for the LM99 */
if (data->kind == lm99 && attr->index <= 2)
val -= 16000;
mutex_lock(&data->update_lock);
if (data->kind == adt7461)
data->temp11[nr] = temp_to_u16_adt7461(data, val);
......@@ -466,6 +482,10 @@ static ssize_t show_temphyst(struct device *dev, struct device_attribute *devatt
else
temp = temp_from_s8(data->temp8[attr->index]);
/* +16 degrees offset for temp2 for the LM99 */
if (data->kind == lm99 && attr->index == 3)
temp += 16000;
return sprintf(buf, "%d\n", temp - temp_from_s8(data->temp_hyst));
}
......@@ -691,6 +711,15 @@ static int lm90_detect(struct i2c_client *new_client, int kind,
} else
if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
kind = lm99;
dev_info(&adapter->dev,
"Assuming LM99 chip at "
"0x%02x\n", address);
dev_info(&adapter->dev,
"If it is an LM89, pass "
"force_lm86=%d,0x%02x when "
"loading the lm90 driver\n",
i2c_adapter_id(adapter),
address);
} else
if (address == 0x4C
&& (chip_id & 0xF0) == 0x10) { /* LM86 */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册