提交 91ebb929 编写于 作者: Y Yuval Mintz 提交者: David S. Miller

bnx2x: Add support for Multi-Function UNDI

This adds the ability for bnx2x to load after UNDI is used in the
preboot environment on a multi-function interface which is not the first
interface of a given device.
Notice a side-effect is that the order by which the functions are probed and
thus interfaces appear might change, as this patch utilizes the EPROBE_DEFER
return value (and mechanism).
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 539c89cf
......@@ -2436,7 +2436,8 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
#define GOOD_ME_REG(me_reg) (((me_reg) & ME_REG_VF_VALID) && \
(!((me_reg) & ME_REG_VF_ERR)))
int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code);
int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err);
/* Congestion management fairness mode */
#define CMNG_FNS_NONE 0
#define CMNG_FNS_MINMAX 1
......
......@@ -2265,7 +2265,7 @@ static int bnx2x_nic_load_request(struct bnx2x *bp, u32 *load_code)
* virtualized environments a pf from another VM may have already
* initialized the device including loading FW
*/
int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code)
int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err)
{
/* is another pf loaded on this engine? */
if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
......@@ -2284,8 +2284,12 @@ int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code)
/* abort nic load if version mismatch */
if (my_fw != loaded_fw) {
BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. Aborting\n",
loaded_fw, my_fw);
if (print_err)
BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. Aborting\n",
loaded_fw, my_fw);
else
BNX2X_DEV_INFO("bnx2x with FW %x was already loaded which mismatches my %x FW, possibly due to MF UNDI\n",
loaded_fw, my_fw);
return -EBUSY;
}
}
......@@ -2600,7 +2604,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
LOAD_ERROR_EXIT(bp, load_error1);
/* what did mcp say? */
rc = bnx2x_nic_load_analyze_req(bp, load_code);
rc = bnx2x_compare_fw_ver(bp, load_code, true);
if (rc) {
bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
LOAD_ERROR_EXIT(bp, load_error2);
......
......@@ -9854,6 +9854,64 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp,
#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
#define BCM_5710_UNDI_FW_MF_MAJOR (0x07)
#define BCM_5710_UNDI_FW_MF_MINOR (0x08)
#define BCM_5710_UNDI_FW_MF_VERS (0x05)
#define BNX2X_PREV_UNDI_MF_PORT(p) (0x1a150c + ((p) << 4))
#define BNX2X_PREV_UNDI_MF_FUNC(f) (0x1a184c + ((f) << 4))
static bool bnx2x_prev_unload_undi_fw_supports_mf(struct bnx2x *bp)
{
u8 major, minor, version;
u32 fw;
/* Must check that FW is loaded */
if (!(REG_RD(bp, MISC_REG_RESET_REG_1) &
MISC_REGISTERS_RESET_REG_1_RST_XSEM)) {
BNX2X_DEV_INFO("XSEM is reset - UNDI MF FW is not loaded\n");
return false;
}
/* Read Currently loaded FW version */
fw = REG_RD(bp, XSEM_REG_PRAM);
major = fw & 0xff;
minor = (fw >> 0x8) & 0xff;
version = (fw >> 0x10) & 0xff;
BNX2X_DEV_INFO("Loaded FW: 0x%08x: Major 0x%02x Minor 0x%02x Version 0x%02x\n",
fw, major, minor, version);
if (major > BCM_5710_UNDI_FW_MF_MAJOR)
return true;
if ((major == BCM_5710_UNDI_FW_MF_MAJOR) &&
(minor > BCM_5710_UNDI_FW_MF_MINOR))
return true;
if ((major == BCM_5710_UNDI_FW_MF_MAJOR) &&
(minor == BCM_5710_UNDI_FW_MF_MINOR) &&
(version >= BCM_5710_UNDI_FW_MF_VERS))
return true;
return false;
}
static void bnx2x_prev_unload_undi_mf(struct bnx2x *bp)
{
int i;
/* Due to legacy (FW) code, the first function on each engine has a
* different offset macro from the rest of the functions.
* Setting this for all 8 functions is harmless regardless of whether
* this is actually a multi-function device.
*/
for (i = 0; i < 2; i++)
REG_WR(bp, BNX2X_PREV_UNDI_MF_PORT(i), 1);
for (i = 2; i < 8; i++)
REG_WR(bp, BNX2X_PREV_UNDI_MF_FUNC(i - 2), 1);
BNX2X_DEV_INFO("UNDI FW (MF) set to discard\n");
}
static void bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 port, u8 inc)
{
u16 rcq, bd;
......@@ -10054,7 +10112,7 @@ static int bnx2x_prev_unload_uncommon(struct bnx2x *bp)
* the one required, then FLR will be sufficient to clean any residue
* left by previous driver
*/
rc = bnx2x_nic_load_analyze_req(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION);
rc = bnx2x_compare_fw_ver(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION, false);
if (!rc) {
/* fw version is good */
......@@ -10142,10 +10200,17 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp)
else
timer_count--;
/* If UNDI resides in memory, manually increment it */
if (prev_undi)
/* New UNDI FW supports MF and contains better
* cleaning methods - might be redundant but harmless.
*/
if (bnx2x_prev_unload_undi_fw_supports_mf(bp)) {
bnx2x_prev_unload_undi_mf(bp);
} else if (prev_undi) {
/* If UNDI resides in memory,
* manually increment it
*/
bnx2x_prev_unload_undi_inc(bp, BP_PORT(bp), 1);
}
udelay(10);
}
......@@ -10265,8 +10330,8 @@ static int bnx2x_prev_unload(struct bnx2x *bp)
} while (--time_counter);
if (!time_counter || rc) {
BNX2X_ERR("Failed unloading previous driver, aborting\n");
rc = -EBUSY;
BNX2X_DEV_INFO("Unloading previous driver did not occur, Possibly due to MF UNDI\n");
rc = -EPROBE_DEFER;
}
/* Mark function if its port was used to boot from SAN */
......@@ -11636,7 +11701,11 @@ static int bnx2x_init_bp(struct bnx2x *bp)
DRV_MSG_SEQ_NUMBER_MASK;
BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
bnx2x_prev_unload(bp);
rc = bnx2x_prev_unload(bp);
if (rc) {
bnx2x_free_mem_bp(bp);
return rc;
}
}
if (CHIP_REV_IS_FPGA(bp))
......
......@@ -5932,6 +5932,7 @@
#define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7)
#define MISC_REGISTERS_RESET_REG_1_RST_PXP (0x1<<26)
#define MISC_REGISTERS_RESET_REG_1_RST_PXPV (0x1<<27)
#define MISC_REGISTERS_RESET_REG_1_RST_XSEM (0x1<<22)
#define MISC_REGISTERS_RESET_REG_1_SET 0x584
#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
#define MISC_REGISTERS_RESET_REG_2_MSTAT0 (0x1<<24)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册