提交 8a52c6b4 编写于 作者: J Jean Delvare

i2c: Adapter timeout is in jiffies

i2c_adapter.timeout is in jiffies. Fix all drivers which thought
otherwise. It didn't really matter as long as the value was only used
inside the driver, but soon i2c-core will use it too so it must have
the proper unit.

Note: for the i2c-mpc driver, this fixes a bug in polling mode.
Timeout would trigger after 1 jiffy, which is most probably not what
the author wanted.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Clifford Wolf <clifford@clifford.at>
Acked-by: NSean MacLennan <smaclennan@pikatech.com>
Cc: Stefan Roese <sr@denx.de>
Acked-by: NLennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: NMark A. Greer <mgreer@mvista.com>
上级 8fcfef6e
......@@ -415,7 +415,7 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){
if (dev->irq >= 0){
/* Interrupt mode */
ret = wait_event_interruptible_timeout(dev->wq,
!(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ);
!(in_8(&iic->sts) & STS_PT), dev->adap.timeout);
if (unlikely(ret < 0))
DBG("%d: wait interrupted\n", dev->idx);
......@@ -426,7 +426,7 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){
}
else {
/* Polling mode */
unsigned long x = jiffies + dev->adap.timeout * HZ;
unsigned long x = jiffies + dev->adap.timeout;
while (in_8(&iic->sts) & STS_PT){
if (unlikely(time_after(jiffies, x))){
......@@ -748,7 +748,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
i2c_set_adapdata(adap, dev);
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &iic_algo;
adap->timeout = 1;
adap->timeout = HZ;
ret = i2c_add_adapter(adap);
if (ret < 0) {
......
......@@ -488,7 +488,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
/*
* Default values...should these come in from board code?
*/
new_adapter->timeout = 100;
new_adapter->timeout = HZ;
new_adapter->algo = &iop3xx_i2c_algo;
init_waitqueue_head(&adapter_data->waitq);
......
......@@ -116,7 +116,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
} else {
/* Interrupt mode */
result = wait_event_interruptible_timeout(i2c->queue,
(i2c->interrupt & CSR_MIF), timeout * HZ);
(i2c->interrupt & CSR_MIF), timeout);
if (unlikely(result < 0)) {
pr_debug("I2C: wait interrupted\n");
......@@ -311,7 +311,7 @@ static struct i2c_adapter mpc_ops = {
.owner = THIS_MODULE,
.name = "MPC adapter",
.algo = &mpc_algo,
.timeout = 1,
.timeout = HZ,
};
static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_id *match)
......
......@@ -358,7 +358,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
char abort = 0;
time_left = wait_event_interruptible_timeout(drv_data->waitq,
!drv_data->block, msecs_to_jiffies(drv_data->adapter.timeout));
!drv_data->block, drv_data->adapter.timeout);
spin_lock_irqsave(&drv_data->lock, flags);
if (!time_left) { /* Timed out */
......@@ -374,8 +374,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
spin_unlock_irqrestore(&drv_data->lock, flags);
time_left = wait_event_timeout(drv_data->waitq,
!drv_data->block,
msecs_to_jiffies(drv_data->adapter.timeout));
!drv_data->block, drv_data->adapter.timeout);
if ((time_left <= 0) && drv_data->block) {
drv_data->state = MV64XXX_I2C_STATE_IDLE;
......@@ -530,7 +529,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
drv_data->adapter.timeout = pdata->timeout;
drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
drv_data->adapter.nr = pd->id;
platform_set_drvdata(pd, drv_data);
i2c_set_adapdata(&drv_data->adapter, drv_data);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册