[ARM] Remove MODE_(SVC|IRQ|FIQ|USR) and DEFAULT_FIQ

DEFAULT_FIQ was entirely unused.  MODE_* are just redefinitions
of *_MODE.  Use *_MODE instead.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/kernel/head-nommu.S

@@ -39,7 +39,7 @@
 	__INIT
 	.type	stext, %function
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
+	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
 						@ and irqs disabled
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid

arch/arm/kernel/head.S

@@ -71,7 +71,7 @@
 	__INIT
 	.type	stext, %function
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
+	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
 						@ and irqs disabled
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
@@ -104,7 +104,7 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?

arch/arm/mach-pxa/sleep.S

@@ -189,7 +189,7 @@ ENTRY(pxa_cpu_suspend)
 	.data
 	.align 5
 ENTRY(pxa_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | MODE_SVC	@ set SVC, irqs off
+	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE	@ set SVC, irqs off
 	msr	cpsr_c, r0
 
 	ldr	r0, sleep_save_sp		@ stack phys addr

arch/arm/mach-s3c2410/sleep.S

@@ -128,7 +128,7 @@ s3c2410_sleep_save_phys:
 	*/
 
 ENTRY(s3c2410_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | MODE_SVC
+	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
 	msr	cpsr_c, r0
 
 	@@ load UART to allow us to print the two characters for

arch/arm/mach-sa1100/sleep.S

@@ -177,7 +177,7 @@ sa1110_sdram_controller_fix:
 	.data
 	.align 5
 ENTRY(sa1100_cpu_resume)
-	mov	r0, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+	mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
 	msr	cpsr_c, r0			@ set SVC, irqs off
 
 	ldr	r0, sleep_save_sp		@ stack phys addr

arch/arm/nwfpe/entry26.S

@@ -26,7 +26,7 @@
 It is called from the kernel with code similar to this:
 
 	mov	fp, #0
-	teqp	pc, #PSR_I_BIT | MODE_SVC
+	teqp	pc, #PSR_I_BIT | SVC_MODE
 	ldr	r4, .LC2
 	ldr	pc, [r4]		@ Call FP module USR entry point
 

include/asm-arm/assembler.h

@@ -55,13 +55,6 @@
 #define PLD(code...)
 #endif
 
-#define MODE_USR	USR_MODE
-#define MODE_FIQ	FIQ_MODE
-#define MODE_IRQ	IRQ_MODE
-#define MODE_SVC	SVC_MODE
-
-#define DEFAULT_FIQ	MODE_FIQ
-
 /*
  * Enable and disable interrupts
  */