提交 7921127e 编写于 作者: L Linus Torvalds

Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: smp_on_up: allow non-ARM SMP processors
  ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
  ARM: initrd: disable initrd if passed address overlaps reserved region
  ARM: footbridge: fix debug macros
  ARM: mmci: round down the bytes transferred on error
  ARM: mmci: complete the transaction on error
  ARM: 6642/1: mmci: calculate remaining bytes at error correctly
......@@ -95,6 +95,15 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
return (void __iomem *)addr;
}
/* IO barriers */
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define __iormb() rmb()
#define __iowmb() wmb()
#else
#define __iormb() do { } while (0)
#define __iowmb() do { } while (0)
#endif
/*
* Now, pick up the machine-defined IO definitions
*/
......@@ -125,17 +134,17 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
* The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
*/
#ifdef __io
#define outb(v,p) __raw_writeb(v,__io(p))
#define outw(v,p) __raw_writew((__force __u16) \
cpu_to_le16(v),__io(p))
#define outl(v,p) __raw_writel((__force __u32) \
cpu_to_le32(v),__io(p))
#define outb(v,p) ({ __iowmb(); __raw_writeb(v,__io(p)); })
#define outw(v,p) ({ __iowmb(); __raw_writew((__force __u16) \
cpu_to_le16(v),__io(p)); })
#define outl(v,p) ({ __iowmb(); __raw_writel((__force __u32) \
cpu_to_le32(v),__io(p)); })
#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; })
#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __iormb(); __v; })
#define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \
__raw_readw(__io(p))); __v; })
__raw_readw(__io(p))); __iormb(); __v; })
#define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \
__raw_readl(__io(p))); __v; })
__raw_readl(__io(p))); __iormb(); __v; })
#define outsb(p,d,l) __raw_writesb(__io(p),d,l)
#define outsw(p,d,l) __raw_writesw(__io(p),d,l)
......@@ -192,14 +201,6 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
#define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \
cpu_to_le32(v),__mem_pci(c)))
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define __iormb() rmb()
#define __iowmb() wmb()
#else
#define __iormb() do { } while (0)
#define __iowmb() do { } while (0)
#endif
#define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; })
#define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; })
#define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; })
......
......@@ -392,24 +392,22 @@ ENDPROC(__turn_mmu_on)
#ifdef CONFIG_SMP_ON_UP
__fixup_smp:
mov r4, #0x00070000
orr r3, r4, #0xff000000 @ mask 0xff070000
orr r4, r4, #0x41000000 @ val 0x41070000
and r0, r9, r3
teq r0, r4 @ ARM CPU and ARMv6/v7?
and r3, r9, #0x000f0000 @ architecture version
teq r3, #0x000f0000 @ CPU ID supported?
bne __fixup_smp_on_up @ no, assume UP
orr r3, r3, #0x0000ff00
orr r3, r3, #0x000000f0 @ mask 0xff07fff0
bic r3, r9, #0x00ff0000
bic r3, r3, #0x0000000f @ mask 0xff00fff0
mov r4, #0x41000000
orr r4, r4, #0x0000b000
orr r4, r4, #0x00000020 @ val 0x4107b020
and r0, r9, r3
teq r0, r4 @ ARM 11MPCore?
orr r4, r4, #0x00000020 @ val 0x4100b020
teq r3, r4 @ ARM 11MPCore?
moveq pc, lr @ yes, assume SMP
mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
tst r0, #1 << 31
movne pc, lr @ bit 31 => SMP
and r0, r0, #0xc0000000 @ multiprocessing extensions and
teq r0, #0x80000000 @ not part of a uniprocessor system?
moveq pc, lr @ yes, assume SMP
__fixup_smp_on_up:
adr r0, 1f
......
......@@ -17,8 +17,8 @@
/* For NetWinder debugging */
.macro addruart, rp, rv
mov \rp, #0x000003f8
orr \rv, \rp, #0x7c000000 @ physical
orr \rp, \rp, #0xff000000 @ virtual
orr \rv, \rp, #0xff000000 @ virtual
orr \rp, \rp, #0x7c000000 @ physical
.endm
#define UART_SHIFT 0
......
......@@ -297,6 +297,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
memblock_reserve(__pa(_stext), _end - _stext);
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (phys_initrd_size &&
memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
phys_initrd_start, phys_initrd_size);
phys_initrd_start = phys_initrd_size = 0;
}
if (phys_initrd_size) {
memblock_reserve(phys_initrd_start, phys_initrd_size);
......
......@@ -14,6 +14,7 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/highmem.h>
......@@ -283,19 +284,19 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
u32 remain, success;
/* Calculate how far we are into the transfer */
remain = readl(host->base + MMCIDATACNT) << 2;
remain = readl(host->base + MMCIDATACNT);
success = data->blksz * data->blocks - remain;
dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
if (status & MCI_DATACRCFAIL) {
/* Last block was not successful */
host->data_xfered = ((success / data->blksz) - 1 * data->blksz);
host->data_xfered = round_down(success - 1, data->blksz);
data->error = -EILSEQ;
} else if (status & MCI_DATATIMEOUT) {
host->data_xfered = success;
host->data_xfered = round_down(success, data->blksz);
data->error = -ETIMEDOUT;
} else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
host->data_xfered = success;
host->data_xfered = round_down(success, data->blksz);
data->error = -EIO;
}
......@@ -319,7 +320,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
if (status & MCI_DATABLOCKEND)
dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n");
if (status & MCI_DATAEND) {
if (status & MCI_DATAEND || data->error) {
mmci_stop_data(host);
if (!data->error)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册