提交 6fd592da 编写于 作者: C Carlos R. Mafra 提交者: Ingo Molnar

x86: clean up computation of HPET .mult variables

While reading through the HPET code I realized that the
computation of .mult variables could be done with less
lines of code, resulting in a 1.6% text size saving
for hpet.o

So I propose the following patch, which applies against
today's Linus -git tree.

>From 0c6507e400e9ca5f7f14331e18f8c12baf75a9d3 Mon Sep 17 00:00:00 2001
From: Carlos R. Mafra <crmafra@ift.unesp.br>
Date: Mon, 5 May 2008 19:38:53 -0300

The computation of clocksource_hpet.mult

       tmp = (u64)hpet_period << HPET_SHIFT;
       do_div(tmp, FSEC_PER_NSEC);
       clocksource_hpet.mult = (u32)tmp;

can be streamlined if we note that it is equal to

       clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT);

Furthermore, the computation of hpet_clockevent.mult

       uint64_t hpet_freq;

       hpet_freq = 1000000000000000ULL;
       do_div(hpet_freq, hpet_period);
       hpet_clockevent.mult = div_sc((unsigned long) hpet_freq,
                                     NSEC_PER_SEC, hpet_clockevent.shift);

can also be streamlined with the observation that hpet_period and hpet_freq are
inverse to each other (in proper units).

So instead of computing hpet_freq and using (schematically)
div_sc(hpet_freq, 10^9, shift) we use the trick of calling with the
arguments in reverse order, div_sc(10^6, hpet_period, shift).

The different power of ten is due to frequency being in Hertz (1/sec)
and the period being in units of femtosecond. Explicitly,

mult = (hpet_freq * 2^shift)/10^9    (before)
mult = (10^6 * 2^shift)/hpet_period  (after)

because hpet_freq = 10^15/hpet_period.

The comments in the code are also updated to reflect the changes.

As a result,

   text    data     bss     dec     hex filename
   2957     425      92    3474     d92 arch/x86/kernel/hpet.o
   3006     425      92    3523     dc3 arch/x86/kernel/hpet.o.old

a 1.6% reduction in text size.
Signed-off-by: NCarlos R. Mafra <crmafra@ift.unesp.br>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
上级 492c2e47
......@@ -17,7 +17,7 @@
/* FSEC = 10^-15
NSEC = 10^-9 */
#define FSEC_PER_NSEC 1000000
#define FSEC_PER_NSEC 1000000L
/*
* HPET address is set in acpi/boot.c, when an ACPI entry exists
......@@ -206,20 +206,19 @@ static void hpet_enable_legacy_int(void)
static void hpet_legacy_clockevent_register(void)
{
uint64_t hpet_freq;
/* Start HPET legacy interrupts */
hpet_enable_legacy_int();
/*
* The period is a femto seconds value. We need to calculate the
* scaled math multiplication factor for nanosecond to hpet tick
* conversion.
* The mult factor is defined as (include/linux/clockchips.h)
* mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h)
* hpet_period is in units of femtoseconds (per cycle), so
* mult/2^shift = cyc/ns = 10^6/hpet_period
* mult = (10^6 * 2^shift)/hpet_period
* mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period
*/
hpet_freq = 1000000000000000ULL;
do_div(hpet_freq, hpet_period);
hpet_clockevent.mult = div_sc((unsigned long) hpet_freq,
NSEC_PER_SEC, hpet_clockevent.shift);
hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC,
hpet_period, hpet_clockevent.shift);
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
......@@ -324,7 +323,7 @@ static struct clocksource clocksource_hpet = {
static int hpet_clocksource_register(void)
{
u64 tmp, start, now;
u64 start, now;
cycle_t t1;
/* Start the counter */
......@@ -351,21 +350,15 @@ static int hpet_clocksource_register(void)
return -ENODEV;
}
/* Initialize and register HPET clocksource
*
* hpet period is in femto seconds per cycle
* so we need to convert this to ns/cyc units
* approximated by mult/2^shift
*
* fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
* fsec/cyc * 1ns/1000000fsec * 2^shift = mult
* fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
* (fsec/cyc << shift)/1000000 = mult
* (hpet_period << shift)/FSEC_PER_NSEC = mult
/*
* The definition of mult is (include/linux/clocksource.h)
* mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc
* so we first need to convert hpet_period to ns/cyc units:
* mult/2^shift = ns/cyc = hpet_period/10^6
* mult = (hpet_period * 2^shift)/10^6
* mult = (hpet_period << shift)/FSEC_PER_NSEC
*/
tmp = (u64)hpet_period << HPET_SHIFT;
do_div(tmp, FSEC_PER_NSEC);
clocksource_hpet.mult = (u32)tmp;
clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT);
clocksource_register(&clocksource_hpet);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册