提交 6e694ea3 编写于 作者: J Jack Morgenstein 提交者: Roland Dreier

IB/mlx4: Fix data corruption triggered by wrong headroom marking order

This is an addendum to commit 0e6e7416 ("IB/mlx4: Handle new FW
requirement for send request prefetching").  We also need to handle
prefetch marking properly for S/G segments, or else the HCA may end up
processing S/G segments that are not fully written and end up sending
the wrong data.  This can actually cause data corruption in practice,
especially on systems with relatively slow CPUs (where the HCA is more
likely to prefetch while the CPU is in the middle of writing a work
request into memory).

We write S/G segments in reverse order into the WQE, in order to
guarantee that the first dword of all cachelines containing S/G
segments is written last (overwriting the headroom invalidation
pattern).  The entire cacheline will thus contain valid data when the
invalidation pattern is overwritten.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
上级 40ffbfad
......@@ -1211,12 +1211,42 @@ static void set_datagram_seg(struct mlx4_wqe_datagram_seg *dseg,
dseg->qkey = cpu_to_be32(wr->wr.ud.remote_qkey);
}
static void set_data_seg(struct mlx4_wqe_data_seg *dseg,
struct ib_sge *sg)
static void set_mlx_icrc_seg(void *dseg)
{
u32 *t = dseg;
struct mlx4_wqe_inline_seg *iseg = dseg;
t[1] = 0;
/*
* Need a barrier here before writing the byte_count field to
* make sure that all the data is visible before the
* byte_count field is set. Otherwise, if the segment begins
* a new cacheline, the HCA prefetcher could grab the 64-byte
* chunk and get a valid (!= * 0xffffffff) byte count but
* stale data, and end up sending the wrong data.
*/
wmb();
iseg->byte_count = cpu_to_be32((1 << 31) | 4);
}
static void set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg)
{
dseg->byte_count = cpu_to_be32(sg->length);
dseg->lkey = cpu_to_be32(sg->lkey);
dseg->addr = cpu_to_be64(sg->addr);
/*
* Need a barrier here before writing the byte_count field to
* make sure that all the data is visible before the
* byte_count field is set. Otherwise, if the segment begins
* a new cacheline, the HCA prefetcher could grab the 64-byte
* chunk and get a valid (!= * 0xffffffff) byte count but
* stale data, and end up sending the wrong data.
*/
wmb();
dseg->byte_count = cpu_to_be32(sg->length);
}
int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
......@@ -1225,6 +1255,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
struct mlx4_ib_qp *qp = to_mqp(ibqp);
void *wqe;
struct mlx4_wqe_ctrl_seg *ctrl;
struct mlx4_wqe_data_seg *dseg;
unsigned long flags;
int nreq;
int err = 0;
......@@ -1324,22 +1355,27 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
break;
}
for (i = 0; i < wr->num_sge; ++i) {
set_data_seg(wqe, wr->sg_list + i);
/*
* Write data segments in reverse order, so as to
* overwrite cacheline stamp last within each
* cacheline. This avoids issues with WQE
* prefetching.
*/
wqe += sizeof (struct mlx4_wqe_data_seg);
size += sizeof (struct mlx4_wqe_data_seg) / 16;
}
dseg = wqe;
dseg += wr->num_sge - 1;
size += wr->num_sge * (sizeof (struct mlx4_wqe_data_seg) / 16);
/* Add one more inline data segment for ICRC for MLX sends */
if (qp->ibqp.qp_type == IB_QPT_SMI || qp->ibqp.qp_type == IB_QPT_GSI) {
((struct mlx4_wqe_inline_seg *) wqe)->byte_count =
cpu_to_be32((1 << 31) | 4);
((u32 *) wqe)[1] = 0;
wqe += sizeof (struct mlx4_wqe_data_seg);
if (unlikely(qp->ibqp.qp_type == IB_QPT_SMI ||
qp->ibqp.qp_type == IB_QPT_GSI)) {
set_mlx_icrc_seg(dseg + 1);
size += sizeof (struct mlx4_wqe_data_seg) / 16;
}
for (i = wr->num_sge - 1; i >= 0; --i, --dseg)
set_data_seg(dseg, wr->sg_list + i);
ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
MLX4_WQE_CTRL_FENCE : 0) | size;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册