net: velocity: Add platform device support to VIA velocity driver

Add support for the VIA Velocity network driver to be bound to a
OF created platform device.
Signed-off-by: NTony Prisk <linux@prisktech.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/via-velocity.txt

+* VIA Velocity 10/100/1000 Network Controller
+
+Required properties:
+- compatible : Should be "via,velocity-vt6110"
+- reg : Address and length of the io space
+- interrupts : Should contain the controller interrupt line
+
+Optional properties:
+- no-eeprom : PCI network cards use an external EEPROM to store data. Embedded
+	devices quite often set this data in uboot and do not provide an eeprom.
+	Specify this option if you have no external eeprom.
+
+Examples:
+
+eth0@d8004000 {
+	compatible = "via,velocity-vt6110";
+	reg = <0xd8004000 0x400>;
+	interrupts = <10>;
+	no-eeprom;
+};

drivers/net/ethernet/via/Kconfig

@@ -5,7 +5,6 @@
 config NET_VENDOR_VIA
 	bool "VIA devices"
 	default y
-	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -45,7 +44,7 @@ config VIA_RHINE_MMIO
 
 config VIA_VELOCITY
 	tristate "VIA Velocity support"
-	depends on PCI
+	depends on (PCI || USE_OF)
 	select CRC32
 	select CRC_CCITT
 	select NET_CORE

drivers/net/ethernet/via/via-velocity.h

@@ -1265,7 +1265,7 @@ struct velocity_context {
 #define PHYID_VT3216_64BIT  0x000FC600UL
 #define PHYID_MARVELL_1000  0x01410C50UL
 #define PHYID_MARVELL_1000S 0x01410C40UL
-
+#define PHYID_ICPLUS_IP101A 0x02430C54UL
 #define PHYID_REV_ID_MASK   0x0000000FUL
 
 #define PHYID_GET_PHY_ID(i)         ((i) & ~PHYID_REV_ID_MASK)
@@ -1437,6 +1437,7 @@ struct velocity_info {
 	struct device *dev;
 	struct pci_dev *pdev;
 	struct net_device *netdev;
+	int no_eeprom;
 
 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
 	u8 ip_addr[4];