提交 6dab7ede 编写于 作者: L Linus Torvalds

Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM fixes from Russell King:
 "The largest thing in this set of changes is bringing back some of the
  ARMv3 code to fix a compile problem noticed on RiscPC, which we still
  support, even though we only support ARMv4 there.

  (The reason is that the system bus doesn't support ARMv4 half-word
  accesses, so we need the ARMv3 library code for this platform.)

  The rest are all quite minor fixes."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBE
  ARM: Bring back ARMv3 IO and user access code
  ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems
  ARM: 7488/1: mm: use 5 bits for swapfile type encoding
  ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present
  ARM: 7486/1: sched_clock: update epoch_cyc on resume
  ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocks
  ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled
  ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology
......@@ -38,7 +38,6 @@ config ARM
select HARDIRQS_SW_RESEND
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_PROBE
select ARCH_WANT_IPC_PARSE_VERSION
select HARDIRQS_SW_RESEND
select CPU_PM if (SUSPEND || CPU_IDLE)
......@@ -126,11 +125,6 @@ config TRACE_IRQFLAGS_SUPPORT
bool
default y
config GENERIC_LOCKBREAK
bool
default y
depends on SMP && PREEMPT
config RWSEM_GENERIC_SPINLOCK
bool
default y
......
......@@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
#define pte_none(pte) (!pte_val(pte))
#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT)
#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY))
#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY)
#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN))
#define pte_special(pte) (0)
#define pte_present_user(pte) \
((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
(L_PTE_PRESENT | L_PTE_USER))
#if __LINUX_ARM_ARCH__ < 6
static inline void __sync_icache_dcache(pte_t pteval)
{
......@@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval);
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval)
{
if (addr >= TASK_SIZE)
set_pte_ext(ptep, pteval, 0);
else {
unsigned long ext = 0;
if (addr < TASK_SIZE && pte_present_user(pteval)) {
__sync_icache_dcache(pteval);
set_pte_ext(ptep, pteval, PTE_EXT_NG);
ext |= PTE_EXT_NG;
}
}
#define pte_none(pte) (!pte_val(pte))
#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT)
#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY))
#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY)
#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN))
#define pte_special(pte) (0)
#define pte_present_user(pte) \
((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
(L_PTE_PRESENT | L_PTE_USER))
set_pte_ext(ptep, pteval, ext);
}
#define PTE_BIT_FUNC(fn,op) \
static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
......@@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
*
* 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* <--------------- offset --------------------> <- type --> 0 0 0
* <--------------- offset ----------------------> < type -> 0 0 0
*
* This gives us up to 63 swap files and 32GB per swap file. Note that
* This gives us up to 31 swap files and 64GB per swap file. Note that
* the offset field is always non-zero.
*/
#define __SWP_TYPE_SHIFT 3
#define __SWP_TYPE_BITS 6
#define __SWP_TYPE_BITS 5
#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
......
......@@ -10,5 +10,7 @@
extern void sched_clock_postinit(void);
extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
unsigned long rate);
#endif
......@@ -21,6 +21,8 @@ struct clock_data {
u32 epoch_cyc_copy;
u32 mult;
u32 shift;
bool suspended;
bool needs_suspend;
};
static void sched_clock_poll(unsigned long wrap_ticks);
......@@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
u64 epoch_ns;
u32 epoch_cyc;
if (cd.suspended)
return cd.epoch_ns;
/*
* Load the epoch_cyc and epoch_ns atomically. We do this by
* ensuring that we always write epoch_cyc, epoch_ns and
......@@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks)
update_sched_clock();
}
void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
unsigned long rate)
{
setup_sched_clock(read, bits, rate);
cd.needs_suspend = true;
}
void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
{
unsigned long r, w;
......@@ -169,11 +181,23 @@ void __init sched_clock_postinit(void)
static int sched_clock_suspend(void)
{
sched_clock_poll(sched_clock_timer.data);
if (cd.needs_suspend)
cd.suspended = true;
return 0;
}
static void sched_clock_resume(void)
{
if (cd.needs_suspend) {
cd.epoch_cyc = read_sched_clock();
cd.epoch_cyc_copy = cd.epoch_cyc;
cd.suspended = false;
}
}
static struct syscore_ops sched_clock_ops = {
.suspend = sched_clock_suspend,
.resume = sched_clock_resume,
};
static int __init sched_clock_syscore_init(void)
......
......@@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid)
* init_cpu_topology is called at boot when only one cpu is running
* which prevent simultaneous write access to cpu_topology array
*/
void init_cpu_topology(void)
void __init init_cpu_topology(void)
{
unsigned int cpu;
......
......@@ -16,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
call_with_stack.o
mmu-y := clear_user.o copy_page.o getuser.o putuser.o
mmu-y += copy_from_user.o copy_to_user.o
# the code in uaccess.S is not preemption safe and
# probably faster on ARMv3 only
ifeq ($(CONFIG_PREEMPT),y)
mmu-y += copy_from_user.o copy_to_user.o
else
ifneq ($(CONFIG_CPU_32v3),y)
mmu-y += copy_from_user.o copy_to_user.o
else
mmu-y += uaccess.o
endif
endif
# using lib_ here won't override already available weak symbols
obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
lib-$(CONFIG_MMU) += $(mmu-y)
lib-y += io-readsw-armv4.o io-writesw-armv4.o
lib-$(CONFIG_MMU) += $(mmu-y)
ifeq ($(CONFIG_CPU_32v3),y)
lib-y += io-readsw-armv3.o io-writesw-armv3.o
else
lib-y += io-readsw-armv4.o io-writesw-armv4.o
endif
lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o
lib-$(CONFIG_ARCH_SHARK) += io-shark.o
......
/*
* linux/arch/arm/lib/io-readsw-armv3.S
*
* Copyright (C) 1995-2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
.Linsw_bad_alignment:
adr r0, .Linsw_bad_align_msg
mov r2, lr
b panic
.Linsw_bad_align_msg:
.asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
.align
.Linsw_align: tst r1, #1
bne .Linsw_bad_alignment
ldr r3, [r0]
strb r3, [r1], #1
mov r3, r3, lsr #8
strb r3, [r1], #1
subs r2, r2, #1
moveq pc, lr
ENTRY(__raw_readsw)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
tst r1, #3
bne .Linsw_align
.Linsw_aligned: mov ip, #0xff
orr ip, ip, ip, lsl #8
stmfd sp!, {r4, r5, r6, lr}
subs r2, r2, #8
bmi .Lno_insw_8
.Linsw_8_lp: ldr r3, [r0]
and r3, r3, ip
ldr r4, [r0]
orr r3, r3, r4, lsl #16
ldr r4, [r0]
and r4, r4, ip
ldr r5, [r0]
orr r4, r4, r5, lsl #16
ldr r5, [r0]
and r5, r5, ip
ldr r6, [r0]
orr r5, r5, r6, lsl #16
ldr r6, [r0]
and r6, r6, ip
ldr lr, [r0]
orr r6, r6, lr, lsl #16
stmia r1!, {r3 - r6}
subs r2, r2, #8
bpl .Linsw_8_lp
tst r2, #7
ldmeqfd sp!, {r4, r5, r6, pc}
.Lno_insw_8: tst r2, #4
beq .Lno_insw_4
ldr r3, [r0]
and r3, r3, ip
ldr r4, [r0]
orr r3, r3, r4, lsl #16
ldr r4, [r0]
and r4, r4, ip
ldr r5, [r0]
orr r4, r4, r5, lsl #16
stmia r1!, {r3, r4}
.Lno_insw_4: tst r2, #2
beq .Lno_insw_2
ldr r3, [r0]
and r3, r3, ip
ldr r4, [r0]
orr r3, r3, r4, lsl #16
str r3, [r1], #4
.Lno_insw_2: tst r2, #1
ldrne r3, [r0]
strneb r3, [r1], #1
movne r3, r3, lsr #8
strneb r3, [r1]
ldmfd sp!, {r4, r5, r6, pc}
/*
* linux/arch/arm/lib/io-writesw-armv3.S
*
* Copyright (C) 1995-2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
.Loutsw_bad_alignment:
adr r0, .Loutsw_bad_align_msg
mov r2, lr
b panic
.Loutsw_bad_align_msg:
.asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
.align
.Loutsw_align: tst r1, #1
bne .Loutsw_bad_alignment
add r1, r1, #2
ldr r3, [r1, #-4]
mov r3, r3, lsr #16
orr r3, r3, r3, lsl #16
str r3, [r0]
subs r2, r2, #1
moveq pc, lr
ENTRY(__raw_writesw)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
tst r1, #3
bne .Loutsw_align
stmfd sp!, {r4, r5, r6, lr}
subs r2, r2, #8
bmi .Lno_outsw_8
.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6}
mov ip, r3, lsl #16
orr ip, ip, ip, lsr #16
str ip, [r0]
mov ip, r3, lsr #16
orr ip, ip, ip, lsl #16
str ip, [r0]
mov ip, r4, lsl #16
orr ip, ip, ip, lsr #16
str ip, [r0]
mov ip, r4, lsr #16
orr ip, ip, ip, lsl #16
str ip, [r0]
mov ip, r5, lsl #16
orr ip, ip, ip, lsr #16
str ip, [r0]
mov ip, r5, lsr #16
orr ip, ip, ip, lsl #16
str ip, [r0]
mov ip, r6, lsl #16
orr ip, ip, ip, lsr #16
str ip, [r0]
mov ip, r6, lsr #16
orr ip, ip, ip, lsl #16
str ip, [r0]
subs r2, r2, #8
bpl .Loutsw_8_lp
tst r2, #7
ldmeqfd sp!, {r4, r5, r6, pc}
.Lno_outsw_8: tst r2, #4
beq .Lno_outsw_4
ldmia r1!, {r3, r4}
mov ip, r3, lsl #16
orr ip, ip, ip, lsr #16
str ip, [r0]
mov ip, r3, lsr #16
orr ip, ip, ip, lsl #16
str ip, [r0]
mov ip, r4, lsl #16
orr ip, ip, ip, lsr #16
str ip, [r0]
mov ip, r4, lsr #16
orr ip, ip, ip, lsl #16
str ip, [r0]
.Lno_outsw_4: tst r2, #2
beq .Lno_outsw_2
ldr r3, [r1], #4
mov ip, r3, lsl #16
orr ip, ip, ip, lsr #16
str ip, [r0]
mov ip, r3, lsr #16
orr ip, ip, ip, lsl #16
str ip, [r0]
.Lno_outsw_2: tst r2, #1
ldrne r3, [r1]
movne ip, r3, lsl #16
orrne ip, ip, ip, lsr #16
strne ip, [r0]
ldmfd sp!, {r4, r5, r6, pc}
/*
* linux/arch/arm/lib/uaccess.S
*
* Copyright (C) 1995, 1996,1997,1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Routines to block copy data to/from user memory
* These are highly optimised both for the 4k page size
* and for various alignments.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
.text
#define PAGE_SHIFT 12
/* Prototype: int __copy_to_user(void *to, const char *from, size_t n)
* Purpose : copy a block to user memory from kernel memory
* Params : to - user memory
* : from - kernel memory
* : n - number of bytes to copy
* Returns : Number of bytes NOT copied.
*/
.Lc2u_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
ldrb r3, [r1], #1
USER( TUSER( strb) r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( TUSER( strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( TUSER( strgtb) r3, [r0], #1) @ May fault
sub r2, r2, ip
b .Lc2u_dest_aligned
ENTRY(__copy_to_user)
stmfd sp!, {r2, r4 - r7, lr}
cmp r2, #4
blt .Lc2u_not_enough
ands ip, r0, #3
bne .Lc2u_dest_not_aligned
.Lc2u_dest_aligned:
ands ip, r1, #3
bne .Lc2u_src_not_aligned
/*
* Seeing as there has to be at least 8 bytes to copy, we can
* copy one word, and force a user-mode page fault...
*/
.Lc2u_0fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lc2u_0nowords
ldr r3, [r1], #4
USER( TUSER( str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .Lc2u_0fupi
/*
* ip = max no. of bytes to copy before needing another "strt" insn
*/
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #32
blt .Lc2u_0rem8lp
.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6}
stmia r0!, {r3 - r6} @ Shouldnt fault
ldmia r1!, {r3 - r6}
subs ip, ip, #32
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .Lc2u_0cpy8lp
.Lc2u_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6}
stmgeia r0!, {r3 - r6} @ Shouldnt fault
tst ip, #8
ldmneia r1!, {r3 - r4}
stmneia r0!, {r3 - r4} @ Shouldnt fault
tst ip, #4
ldrne r3, [r1], #4
TUSER( strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_0fupi
.Lc2u_0nowords: teq ip, #0
beq .Lc2u_finished
.Lc2u_nowords: cmp ip, #2
ldrb r3, [r1], #1
USER( TUSER( strb) r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( TUSER( strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( TUSER( strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
.Lc2u_not_enough:
movs ip, r2
bne .Lc2u_nowords
.Lc2u_finished: mov r0, #0
ldmfd sp!, {r2, r4 - r7, pc}
.Lc2u_src_not_aligned:
bic r1, r1, #3
ldr r7, [r1], #4
cmp ip, #2
bgt .Lc2u_3fupi
beq .Lc2u_2fupi
.Lc2u_1fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lc2u_1nowords
mov r3, r7, pull #8
ldr r7, [r1], #4
orr r3, r3, r7, push #24
USER( TUSER( str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .Lc2u_1fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .Lc2u_1rem8lp
.Lc2u_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #24
mov r4, r4, pull #8
orr r4, r4, r5, push #24
mov r5, r5, pull #8
orr r5, r5, r6, push #24
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .Lc2u_1cpy8lp
.Lc2u_1rem8lp: tst ip, #8
movne r3, r7, pull #8
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #24
movne r4, r4, pull #8
orrne r4, r4, r7, push #24
stmneia r0!, {r3 - r4} @ Shouldnt fault
tst ip, #4
movne r3, r7, pull #8
ldrne r7, [r1], #4
orrne r3, r3, r7, push #24
TUSER( strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_1fupi
.Lc2u_1nowords: mov r3, r7, get_byte_1
teq ip, #0
beq .Lc2u_finished
cmp ip, #2
USER( TUSER( strb) r3, [r0], #1) @ May fault
movge r3, r7, get_byte_2
USER( TUSER( strgeb) r3, [r0], #1) @ May fault
movgt r3, r7, get_byte_3
USER( TUSER( strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
.Lc2u_2fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lc2u_2nowords
mov r3, r7, pull #16
ldr r7, [r1], #4
orr r3, r3, r7, push #16
USER( TUSER( str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .Lc2u_2fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .Lc2u_2rem8lp
.Lc2u_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #16
mov r4, r4, pull #16
orr r4, r4, r5, push #16
mov r5, r5, pull #16
orr r5, r5, r6, push #16
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .Lc2u_2cpy8lp
.Lc2u_2rem8lp: tst ip, #8
movne r3, r7, pull #16
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #16
movne r4, r4, pull #16
orrne r4, r4, r7, push #16
stmneia r0!, {r3 - r4} @ Shouldnt fault
tst ip, #4
movne r3, r7, pull #16
ldrne r7, [r1], #4
orrne r3, r3, r7, push #16
TUSER( strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_2fupi
.Lc2u_2nowords: mov r3, r7, get_byte_2
teq ip, #0
beq .Lc2u_finished
cmp ip, #2
USER( TUSER( strb) r3, [r0], #1) @ May fault
movge r3, r7, get_byte_3
USER( TUSER( strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( TUSER( strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
.Lc2u_3fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lc2u_3nowords
mov r3, r7, pull #24
ldr r7, [r1], #4
orr r3, r3, r7, push #8
USER( TUSER( str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .Lc2u_3fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .Lc2u_3rem8lp
.Lc2u_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #8
mov r4, r4, pull #24
orr r4, r4, r5, push #8
mov r5, r5, pull #24
orr r5, r5, r6, push #8
mov r6, r6, pull #24
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .Lc2u_3cpy8lp
.Lc2u_3rem8lp: tst ip, #8
movne r3, r7, pull #24
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #8
movne r4, r4, pull #24
orrne r4, r4, r7, push #8
stmneia r0!, {r3 - r4} @ Shouldnt fault
tst ip, #4
movne r3, r7, pull #24
ldrne r7, [r1], #4
orrne r3, r3, r7, push #8
TUSER( strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_3fupi
.Lc2u_3nowords: mov r3, r7, get_byte_3
teq ip, #0
beq .Lc2u_finished
cmp ip, #2
USER( TUSER( strb) r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( TUSER( strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( TUSER( strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
ENDPROC(__copy_to_user)
.pushsection .fixup,"ax"
.align 0
9001: ldmfd sp!, {r0, r4 - r7, pc}
.popsection
/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
* Purpose : copy a block from user memory to kernel memory
* Params : to - kernel memory
* : from - user memory
* : n - number of bytes to copy
* Returns : Number of bytes NOT copied.
*/
.Lcfu_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
USER( TUSER( ldrb) r3, [r1], #1) @ May fault
strb r3, [r0], #1
USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
sub r2, r2, ip
b .Lcfu_dest_aligned
ENTRY(__copy_from_user)
stmfd sp!, {r0, r2, r4 - r7, lr}
cmp r2, #4
blt .Lcfu_not_enough
ands ip, r0, #3
bne .Lcfu_dest_not_aligned
.Lcfu_dest_aligned:
ands ip, r1, #3
bne .Lcfu_src_not_aligned
/*
* Seeing as there has to be at least 8 bytes to copy, we can
* copy one word, and force a user-mode page fault...
*/
.Lcfu_0fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lcfu_0nowords
USER( TUSER( ldr) r3, [r1], #4)
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .Lcfu_0fupi
/*
* ip = max no. of bytes to copy before needing another "strt" insn
*/
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #32
blt .Lcfu_0rem8lp
.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
stmia r0!, {r3 - r6}
ldmia r1!, {r3 - r6} @ Shouldnt fault
subs ip, ip, #32
stmia r0!, {r3 - r6}
bpl .Lcfu_0cpy8lp
.Lcfu_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6} @ Shouldnt fault
stmgeia r0!, {r3 - r6}
tst ip, #8
ldmneia r1!, {r3 - r4} @ Shouldnt fault
stmneia r0!, {r3 - r4}
tst ip, #4
TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault
strne r3, [r0], #4
ands ip, ip, #3
beq .Lcfu_0fupi
.Lcfu_0nowords: teq ip, #0
beq .Lcfu_finished
.Lcfu_nowords: cmp ip, #2
USER( TUSER( ldrb) r3, [r1], #1) @ May fault
strb r3, [r0], #1
USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
.Lcfu_not_enough:
movs ip, r2
bne .Lcfu_nowords
.Lcfu_finished: mov r0, #0
add sp, sp, #8
ldmfd sp!, {r4 - r7, pc}
.Lcfu_src_not_aligned:
bic r1, r1, #3
USER( TUSER( ldr) r7, [r1], #4) @ May fault
cmp ip, #2
bgt .Lcfu_3fupi
beq .Lcfu_2fupi
.Lcfu_1fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lcfu_1nowords
mov r3, r7, pull #8
USER( TUSER( ldr) r7, [r1], #4) @ May fault
orr r3, r3, r7, push #24
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .Lcfu_1fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .Lcfu_1rem8lp
.Lcfu_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #24
mov r4, r4, pull #8
orr r4, r4, r5, push #24
mov r5, r5, pull #8
orr r5, r5, r6, push #24
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6}
bpl .Lcfu_1cpy8lp
.Lcfu_1rem8lp: tst ip, #8
movne r3, r7, pull #8
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #24
movne r4, r4, pull #8
orrne r4, r4, r7, push #24
stmneia r0!, {r3 - r4}
tst ip, #4
movne r3, r7, pull #8
USER( TUSER( ldrne) r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #24
strne r3, [r0], #4
ands ip, ip, #3
beq .Lcfu_1fupi
.Lcfu_1nowords: mov r3, r7, get_byte_1
teq ip, #0
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
movge r3, r7, get_byte_2
strgeb r3, [r0], #1
movgt r3, r7, get_byte_3
strgtb r3, [r0], #1
b .Lcfu_finished
.Lcfu_2fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lcfu_2nowords
mov r3, r7, pull #16
USER( TUSER( ldr) r7, [r1], #4) @ May fault
orr r3, r3, r7, push #16
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .Lcfu_2fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .Lcfu_2rem8lp
.Lcfu_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #16
mov r4, r4, pull #16
orr r4, r4, r5, push #16
mov r5, r5, pull #16
orr r5, r5, r6, push #16
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6}
bpl .Lcfu_2cpy8lp
.Lcfu_2rem8lp: tst ip, #8
movne r3, r7, pull #16
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #16
movne r4, r4, pull #16
orrne r4, r4, r7, push #16
stmneia r0!, {r3 - r4}
tst ip, #4
movne r3, r7, pull #16
USER( TUSER( ldrne) r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #16
strne r3, [r0], #4
ands ip, ip, #3
beq .Lcfu_2fupi
.Lcfu_2nowords: mov r3, r7, get_byte_2
teq ip, #0
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
movge r3, r7, get_byte_3
strgeb r3, [r0], #1
USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
.Lcfu_3fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lcfu_3nowords
mov r3, r7, pull #24
USER( TUSER( ldr) r7, [r1], #4) @ May fault
orr r3, r3, r7, push #8
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .Lcfu_3fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .Lcfu_3rem8lp
.Lcfu_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7} @ Shouldnt fault
orr r3, r3, r4, push #8
mov r4, r4, pull #24
orr r4, r4, r5, push #8
mov r5, r5, pull #24
orr r5, r5, r6, push #8
mov r6, r6, pull #24
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6}
subs ip, ip, #16
bpl .Lcfu_3cpy8lp
.Lcfu_3rem8lp: tst ip, #8
movne r3, r7, pull #24
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #8
movne r4, r4, pull #24
orrne r4, r4, r7, push #8
stmneia r0!, {r3 - r4}
tst ip, #4
movne r3, r7, pull #24
USER( TUSER( ldrne) r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #8
strne r3, [r0], #4
ands ip, ip, #3
beq .Lcfu_3fupi
.Lcfu_3nowords: mov r3, r7, get_byte_3
teq ip, #0
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
ENDPROC(__copy_from_user)
.pushsection .fixup,"ax"
.align 0
/*
* We took an exception. r0 contains a pointer to
* the byte not copied.
*/
9001: ldr r2, [sp], #4 @ void *to
sub r2, r0, r2 @ bytes copied
ldr r1, [sp], #4 @ unsigned long count
subs r4, r1, r2 @ bytes left to copy
movne r1, r4
blne __memzero
mov r0, r4
ldmfd sp!, {r4 - r7, pc}
.popsection
......@@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval)
struct page *page;
struct address_space *mapping;
if (!pte_present_user(pteval))
return;
if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
/* only flush non-aliasing VIPT caches for exec mappings */
return;
......
......@@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range)
dsb
mov r0, r0, lsr #PAGE_SHIFT @ align address
mov r1, r1, lsr #PAGE_SHIFT
#ifdef CONFIG_ARM_ERRATA_720789
mov r3, #0
#else
asid r3, r3 @ mask ASID
#ifdef CONFIG_ARM_ERRATA_720789
ALT_SMP(W(mov) r3, #0 )
ALT_UP(W(nop) )
#endif
orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA
mov r1, r1, lsl #PAGE_SHIFT
......
......@@ -719,8 +719,10 @@ static int __init vfp_init(void)
if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
elf_hwcap |= HWCAP_NEON;
#endif
#ifdef CONFIG_VFPv3
if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
elf_hwcap |= HWCAP_VFPv4;
#endif
}
}
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册