提交 67d729ad 编写于 作者: B Ben Dooks 提交者: Russell King

[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call

Add s3c2412_gpio_set_sleepcfg() to allow the setting of the sleep
configuration of the GPIO blocks.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 bdbea34d
......@@ -12,6 +12,7 @@ obj- :=
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
......
/* linux/arch/arm/mach-s3c2412/gpio.c
*
* Copyright (c) 2007 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://armlinux.simtec.co.uk/.
*
* S3C2412/S3C2413 specific GPIO support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/regs-gpio.h>
#include <asm/hardware.h>
int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
{
void __iomem *base = S3C24XX_GPIO_BASE(pin);
unsigned long offs = S3C2410_GPIO_OFFSET(pin);
unsigned long flags;
unsigned long slpcon;
offs *= 2;
if (pin < S3C2410_GPIO_BANKB)
return -EINVAL;
if (pin >= S3C2410_GPIO_BANKF &&
pin <= S3C2410_GPIO_BANKG)
return -EINVAL;
if (pin > (S3C2410_GPIO_BANKH + 32))
return -EINVAL;
local_irq_save(flags);
slpcon = __raw_readl(base + 0x0C);
slpcon &= ~(3 << offs);
slpcon |= state << offs;
__raw_writel(slpcon, base + 0x0C);
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
......@@ -99,6 +99,11 @@ extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
#endif /* CONFIG_CPU_S3C2440 */
#ifdef CONFIG_CPU_S3C2412
extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
#endif /* CONFIG_CPU_S3C2412 */
#endif /* __ASSEMBLY__ */
......
......@@ -1138,6 +1138,11 @@
#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
/* definitions for each pin bit */
#define S3C2412_GPIO_SLPCON_LOW ( 0x00 )
#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
#define S3C2412_GPIO_SLPCON_IN ( 0x02 )
#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2))
#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册