[PATCH] avr32 architecture

This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.

AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.

The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from

http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf

The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.

Full data sheet is available from

http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf

while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from

http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf

Information about the AT32STK1000 development board can be found at

http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918

including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.

Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.

This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.

[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDave McCracken <dmccr@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

MAINTAINERS

@@ -443,6 +443,23 @@ W:	http://people.redhat.com/sgrubb/audit/
 T:	git kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6.git
 S:	Maintained
 
+AVR32 ARCHITECTURE
+P:	Atmel AVR32 Support Team
+M:	avr32@atmel.com
+P:	Haavard Skinnemoen
+M:	hskinnemoen@atmel.com
+W:	http://www.atmel.com/products/AVR32/
+W:	http://avr32linux.org/
+W:	http://avrfreaks.net/
+S:	Supported
+
+AVR32/AT32AP MACHINE SUPPORT
+P:	Atmel AVR32 Support Team
+M:	avr32@atmel.com
+P:	Haavard Skinnemoen
+M:	hskinnemoen@atmel.com
+S:	Supported
+
 AX.25 NETWORK LAYER
 P:	Ralf Baechle
 M:	ralf@linux-mips.org

arch/avr32/Kconfig

+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux Kernel Configuration"
+
+config AVR32
+	bool
+	default y
+	# With EMBEDDED=n, we get lots of stuff automatically selected
+	# that we usually don't need on AVR32.
+	select EMBEDDED
+	help
+	  AVR32 is a high-performance 32-bit RISC microprocessor core,
+	  designed for cost-sensitive embedded applications, with particular
+	  emphasis on low power consumption and high code density.
+
+	  There is an AVR32 Linux project with a web page at
+	  http://avr32linux.org/.
+
+config UID16
+	bool
+
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config HARDIRQS_SW_RESEND
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	default y
+
+config GENERIC_TIME
+	bool
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+
+config GENERIC_BUST_SPINLOCK
+	bool
+
+config GENERIC_HWEIGHT
+	bool
+	default y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+source "init/Kconfig"
+
+menu "System Type and features"
+
+config SUBARCH_AVR32B
+	bool
+config MMU
+	bool
+config PERFORMANCE_COUNTERS
+	bool
+
+config PLATFORM_AT32AP
+	bool
+	select SUBARCH_AVR32B
+	select MMU
+	select PERFORMANCE_COUNTERS
+
+choice
+	prompt "AVR32 CPU type"
+	default CPU_AT32AP7000
+
+config CPU_AT32AP7000
+	bool "AT32AP7000"
+	select PLATFORM_AT32AP
+endchoice
+
+#
+# CPU Daughterboards for ATSTK1000
+config BOARD_ATSTK1002
+	bool
+
+choice
+	prompt "AVR32 board type"
+	default BOARD_ATSTK1000
+
+config BOARD_ATSTK1000
+	bool "ATSTK1000 evaluation board"
+	select BOARD_ATSTK1002 if CPU_AT32AP7000
+endchoice
+
+choice
+	prompt "Boot loader type"
+	default LOADER_U_BOOT
+
+config	LOADER_U_BOOT
+	bool "U-Boot (or similar) bootloader"
+endchoice
+
+config LOAD_ADDRESS
+	hex
+	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+
+config ENTRY_ADDRESS
+	hex
+	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+
+config PHYS_OFFSET
+	hex
+	default 0x10000000 if CPU_AT32AP7000=y
+
+source "kernel/Kconfig.preempt"
+
+config HAVE_ARCH_BOOTMEM_NODE
+	bool
+	default n
+
+config ARCH_HAVE_MEMORY_PRESENT
+	bool
+	default n
+
+config NEED_NODE_MEMMAP_SIZE
+	bool
+	default n
+
+config ARCH_FLATMEM_ENABLE
+	bool
+	default y
+
+config ARCH_DISCONTIGMEM_ENABLE
+	bool
+	default n
+
+config ARCH_SPARSEMEM_ENABLE
+	bool
+	default n
+
+source "mm/Kconfig"
+
+config OWNERSHIP_TRACE
+	bool "Ownership trace support"
+	default y
+	help
+	  Say Y to generate an Ownership Trace message on every context switch,
+	  enabling Nexus-compliant debuggers to keep track of the PID of the
+	  currently executing task.
+
+# FPU emulation goes here
+
+source "kernel/Kconfig.hz"
+
+config CMDLINE
+	string "Default kernel command line"
+	default ""
+	help
+	  If you don't have a boot loader capable of passing a command line string
+	  to the kernel, you may specify one here. As a minimum, you should specify
+	  the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
+
+endmenu
+
+menu "Bus options"
+
+config PCI
+	bool
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/avr32/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"

arch/avr32/Kconfig.debug

+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default y
+
+source "lib/Kconfig.debug"
+
+config KPROBES
+	bool "Kprobes"
+	depends on DEBUG_KERNEL
+	help
+	  Kprobes allows you to trap at almost any kernel address and
+          execute a callback function.  register_kprobe() establishes
+          a probepoint and specifies the callback.  Kprobes is useful
+          for kernel debugging, non-intrusive instrumentation and testing.
+          If in doubt, say "N".
+
+endmenu

arch/avr32/Makefile

+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2004-2006 Atmel Corporation.
+
+# Default target when executing plain make
+.PHONY: all
+all: uImage vmlinux.elf linux.lst
+
+KBUILD_DEFCONFIG	:= atstk1002_defconfig
+
+CFLAGS		+= -pipe -fno-builtin -mno-pic
+AFLAGS		+= -mrelax -mno-pic
+CFLAGS_MODULE	+= -mno-relax
+LDFLAGS_vmlinux	+= --relax
+
+cpuflags-$(CONFIG_CPU_AP7000)	+= -mcpu=ap7000
+
+CFLAGS		+= $(cpuflags-y)
+AFLAGS		+= $(cpuflags-y)
+
+CHECKFLAGS	+= -D__avr32__
+
+LIBGCC		:= $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+
+head-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/head.o
+head-y					+= arch/avr32/kernel/head.o
+core-$(CONFIG_PLATFORM_AT32AP)		+= arch/avr32/mach-at32ap/
+core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
+core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
+core-y					+= arch/avr32/kernel/
+core-y					+= arch/avr32/mm/
+libs-y					+= arch/avr32/lib/ #$(LIBGCC)
+
+archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
+
+include/asm-avr32/.arch: $(wildcard include/config/platform/*.h) include/config/auto.conf
+	@echo '  SYMLINK include/asm-avr32/arch -> include/asm-avr32/$(archincdir-y)'
+ifneq ($(KBUILD_SRC),)
+	$(Q)mkdir -p include/asm-avr32
+	$(Q)ln -fsn $(srctree)/include/asm-avr32/$(archincdir-y) include/asm-avr32/arch
+else
+	$(Q)ln -fsn $(archincdir-y) include/asm-avr32/arch
+endif
+	@touch $@
+
+archprepare: include/asm-avr32/.arch
+
+BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
+
+.PHONY: $(BOOT_TARGETS) install
+
+boot := arch/$(ARCH)/boot/images
+
+             KBUILD_IMAGE := $(boot)/uImage
+vmlinux.elf: KBUILD_IMAGE := $(boot)/vmlinux.elf
+vmlinux.cso: KBUILD_IMAGE := $(boot)/vmlinux.cso
+uImage.srec: KBUILD_IMAGE := $(boot)/uImage.srec
+uImage:      KBUILD_IMAGE := $(boot)/uImage
+
+quiet_cmd_listing = LST     $@
+      cmd_listing = avr32-linux-objdump $(OBJDUMPFLAGS) -lS $< > $@
+quiet_cmd_disasm  = DIS     $@
+      cmd_disasm  = avr32-linux-objdump $(OBJDUMPFLAGS) -d $< > $@
+
+vmlinux.elf vmlinux.bin uImage.srec uImage vmlinux.cso: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+install: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
+
+linux.s: vmlinux
+	$(call if_changed,disasm)
+
+linux.lst: vmlinux
+	$(call if_changed,listing)
+
+define archhelp
+  @echo '* vmlinux.elf		- ELF image with load address 0'
+  @echo '  vmlinux.cso		- PathFinder CSO image'
+  @echo '  uImage		- Create a bootable image for U-Boot'
+endef

arch/avr32/boards/atstk1000/Makefile

+obj-y				+= setup.o spi.o
+obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o

arch/avr32/boards/atstk1000/atstk1002.c

+/*
+ * ATSTK1002 daughterboard-specific init code
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+
+#include <asm/arch/board.h>
+
+struct eth_platform_data __initdata eth0_data = {
+	.valid		= 1,
+	.mii_phy_addr	= 0x10,
+	.is_rmii	= 0,
+	.hw_addr	= { 0x6a, 0x87, 0x71, 0x14, 0xcd, 0xcb },
+};
+
+extern struct lcdc_platform_data atstk1000_fb0_data;
+
+static int __init atstk1002_init(void)
+{
+	at32_add_system_devices();
+
+	at32_add_device_usart(1);	/* /dev/ttyS0 */
+	at32_add_device_usart(2);	/* /dev/ttyS1 */
+	at32_add_device_usart(3);	/* /dev/ttyS2 */
+
+	at32_add_device_eth(0, &eth0_data);
+	at32_add_device_spi(0);
+	at32_add_device_lcdc(0, &atstk1000_fb0_data);
+
+	return 0;
+}
+postcore_initcall(atstk1002_init);

arch/avr32/boards/atstk1000/setup.c

+/*
+ * ATSTK1000 board-specific setup code.
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+
+#include <asm/setup.h>
+
+#include <asm/arch/board.h>
+
+/* Initialized by bootloader-specific startup code. */
+struct tag *bootloader_tags __initdata;
+
+struct lcdc_platform_data __initdata atstk1000_fb0_data;
+
+asmlinkage void __init board_early_init(void)
+{
+	extern void sdram_init(void);
+
+#ifdef CONFIG_LOADER_STANDALONE
+	sdram_init();
+#endif
+}
+
+void __init board_setup_fbmem(unsigned long fbmem_start,
+			      unsigned long fbmem_size)
+{
+	if (!fbmem_size)
+		return;
+
+	if (!fbmem_start) {
+		void *fbmem;
+
+		fbmem = alloc_bootmem_low_pages(fbmem_size);
+		fbmem_start = __pa(fbmem);
+	} else {
+		pg_data_t *pgdat;
+
+		for_each_online_pgdat(pgdat) {
+			if (fbmem_start >= pgdat->bdata->node_boot_start
+			    && fbmem_start <= pgdat->bdata->node_low_pfn)
+				reserve_bootmem_node(pgdat, fbmem_start,
+						     fbmem_size);
+		}
+	}
+
+	printk("%luKiB framebuffer memory at address 0x%08lx\n",
+	       fbmem_size >> 10, fbmem_start);
+	atstk1000_fb0_data.fbmem_start = fbmem_start;
+	atstk1000_fb0_data.fbmem_size = fbmem_size;
+}

arch/avr32/boards/atstk1000/spi.c

+/*
+ * ATSTK1000 SPI devices
+ *
+ * Copyright (C) 2005 Atmel Norway
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "ltv350qv",
+		.max_speed_hz	= 16000000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+	},
+};
+
+static int board_init_spi(void)
+{
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+	return 0;
+}
+arch_initcall(board_init_spi);

arch/avr32/boot/images/Makefile

+#
+# Copyright (C) 2004-2006 Atmel Corporation
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
+
+extra-y		:= vmlinux.bin vmlinux.gz
+
+OBJCOPYFLAGS_vmlinux.bin := -O binary
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+quiet_cmd_uimage = UIMAGE $@
+      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A avr32 -O linux -T kernel	\
+		-C gzip -a $(CONFIG_LOAD_ADDRESS) -e $(CONFIG_ENTRY_ADDRESS)	\
+		-n 'Linux-$(KERNELRELEASE)' -d $< $@
+
+targets += uImage uImage.srec
+$(obj)/uImage: $(obj)/vmlinux.gz
+	$(call if_changed,uimage)
+	@echo '  Image $@ is ready'
+
+OBJCOPYFLAGS_uImage.srec := -I binary -O srec
+$(obj)/uImage.srec: $(obj)/uImage
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_vmlinux.elf := --change-section-lma .text-0x80000000 \
+			    --change-section-lma __ex_table-0x80000000 \
+			    --change-section-lma .rodata-0x80000000 \
+			    --change-section-lma .data-0x80000000 \
+			    --change-section-lma .init-0x80000000 \
+			    --change-section-lma .bss-0x80000000 \
+			    --change-section-lma .initrd-0x80000000 \
+			    --change-section-lma __param-0x80000000 \
+			    --change-section-lma __ksymtab-0x80000000 \
+			    --change-section-lma __ksymtab_gpl-0x80000000 \
+			    --change-section-lma __kcrctab-0x80000000 \
+			    --change-section-lma __kcrctab_gpl-0x80000000 \
+			    --change-section-lma __ksymtab_strings-0x80000000 \
+			    --change-section-lma .got-0x80000000 \
+			    --set-start 0xa0000000
+$(obj)/vmlinux.elf: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+quiet_cmd_sfdwarf = SFDWARF $@
+      cmd_sfdwarf = sfdwarf $< TO $@ GNUAVR IW $(SFDWARF_FLAGS) > $(obj)/sfdwarf.log
+
+$(obj)/vmlinux.cso: $(obj)/vmlinux.elf FORCE
+	$(call if_changed,sfdwarf)
+
+install: $(BOOTIMAGE)
+	sh $(srctree)/install-kernel.sh $<
+
+# Generated files to be removed upon make clean
+clean-files	:= vmlinux* uImage uImage.srec

arch/avr32/boot/u-boot/Makefile

+extra-y		:= head.o
+
+obj-y		:= empty.o

arch/avr32/boot/u-boot/empty.S

+/* Empty file */

arch/avr32/boot/u-boot/head.S

+/*
+ * Startup code for use with the u-boot bootloader.
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/setup.h>
+
+	/*
+	 * The kernel is loaded where we want it to be and all caches
+	 * have just been flushed. We get two parameters from u-boot:
+	 *
+	 * r12 contains a magic number (ATAG_MAGIC)
+	 * r11 points to a tag table providing information about
+	 *     the system.
+	 */
+	.section .init.text,"ax"
+	.global _start
+_start:
+	/* Check if the boot loader actually provided a tag table */
+	lddpc	r0, magic_number
+	cp.w	r12, r0
+	brne	no_tag_table
+
+	/* Initialize .bss */
+	lddpc	r2, bss_start_addr
+	lddpc   r3, end_addr
+	mov	r0, 0
+	mov	r1, 0
+1:      st.d    r2++, r0
+	cp      r2, r3
+	brlo    1b
+
+	/*
+	 * Save the tag table address for later use. This must be done
+	 * _after_ .bss has been initialized...
+	 */
+	lddpc	r0, tag_table_addr
+	st.w	r0[0], r11
+
+	/* Jump to loader-independent setup code */
+	rjmp	kernel_entry
+
+	.align	2
+magic_number:
+	.long	ATAG_MAGIC
+tag_table_addr:
+	.long	bootloader_tags
+bss_start_addr:
+	.long   __bss_start
+end_addr:
+	.long   _end
+
+no_tag_table:
+	sub	r12, pc, (. - 2f)
+	bral	panic
+2:	.asciz	"Boot loader didn't provide correct magic number\n"

arch/avr32/configs/atstk1002_defconfig

+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.18-rc1
+# Tue Jul 11 12:41:36 2006
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+# CONFIG_SLAB is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_SLOB=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type and features
+#
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP7000=y
+CONFIG_BOARD_ATSTK1002=y
+CONFIG_BOARD_ATSTK1000=y
+CONFIG_LOADER_U_BOOT=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Bus options
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AT91=y
+CONFIG_SERIAL_AT91_CONSOLE=y
+# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=m
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=m
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_SIDSA=m
+CONFIG_FB_SIDSA_DEFAULT_BPP=24
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_DEVICE=y
+CONFIG_LCD_LTV350QV=m
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=m
+CONFIG_ROMFS_FS=m
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_KPROBES=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m

arch/avr32/kernel/Makefile

+#
+# Makefile for the Linux/AVR32 kernel.
+#
+
+extra-y				:= head.o vmlinux.lds
+
+obj-$(CONFIG_SUBARCH_AVR32B)	+= entry-avr32b.o
+obj-y				+= syscall_table.o syscall-stubs.o irq.o
+obj-y				+= setup.o traps.o semaphore.o ptrace.o
+obj-y				+= signal.o sys_avr32.o process.o time.o
+obj-y				+= init_task.o switch_to.o cpu.o
+obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+
+USE_STANDARD_AS_RULE		:= true
+
+%.lds: %.lds.c FORCE
+	$(call if_changed_dep,cpp_lds_S)

arch/avr32/kernel/asm-offsets.c

+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/thread_info.h>
+
+#define DEFINE(sym, val) \
+        asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+#define OFFSET(sym, str, mem) \
+        DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+	OFFSET(TI_task, thread_info, task);
+	OFFSET(TI_exec_domain, thread_info, exec_domain);
+	OFFSET(TI_flags, thread_info, flags);
+	OFFSET(TI_cpu, thread_info, cpu);
+	OFFSET(TI_preempt_count, thread_info, preempt_count);
+	OFFSET(TI_restart_block, thread_info, restart_block);
+}

arch/avr32/kernel/avr32_ksyms.c

+/*
+ * Export AVR32-specific functions for loadable modules.
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+
+#include <asm/checksum.h>
+#include <asm/uaccess.h>
+#include <asm/delay.h>
+
+/*
+ * GCC functions
+ */
+extern unsigned long long __avr32_lsl64(unsigned long long u, unsigned long b);
+extern unsigned long long __avr32_lsr64(unsigned long long u, unsigned long b);
+extern unsigned long long __avr32_asr64(unsigned long long u, unsigned long b);
+EXPORT_SYMBOL(__avr32_lsl64);
+EXPORT_SYMBOL(__avr32_lsr64);
+EXPORT_SYMBOL(__avr32_asr64);
+
+/*
+ * String functions
+ */
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+
+/*
+ * Userspace access stuff.
+ */
+EXPORT_SYMBOL(copy_from_user);
+EXPORT_SYMBOL(copy_to_user);
+EXPORT_SYMBOL(__copy_user);
+EXPORT_SYMBOL(strncpy_from_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_generic);
+
+/* Delay loops (lib/delay.S) */
+EXPORT_SYMBOL(__ndelay);
+EXPORT_SYMBOL(__udelay);
+EXPORT_SYMBOL(__const_udelay);
+
+/* Bit operations (lib/findbit.S) */
+EXPORT_SYMBOL(find_first_zero_bit);
+EXPORT_SYMBOL(find_next_zero_bit);
+EXPORT_SYMBOL(find_first_bit);
+EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(generic_find_next_zero_le_bit);

arch/avr32/kernel/cpu.c

+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/percpu.h>
+#include <linux/param.h>
+#include <linux/errno.h>
+
+#include <asm/setup.h>
+#include <asm/sysreg.h>
+
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+#ifdef CONFIG_PERFORMANCE_COUNTERS
+
+/*
+ * XXX: If/when a SMP-capable implementation of AVR32 will ever be
+ * made, we must make sure that the code executes on the correct CPU.
+ */
+static ssize_t show_pc0event(struct sys_device *dev, char *buf)
+{
+	unsigned long pccr;
+
+	pccr = sysreg_read(PCCR);
+	return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f);
+}
+static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
+			      size_t count)
+{
+	unsigned long val;
+	char *endp;
+
+	val = simple_strtoul(buf, &endp, 0);
+	if (endp == buf || val > 0x3f)
+		return -EINVAL;
+	val = (val << 12) | (sysreg_read(PCCR) & 0xfffc0fff);
+	sysreg_write(PCCR, val);
+	return count;
+}
+static ssize_t show_pc0count(struct sys_device *dev, char *buf)
+{
+	unsigned long pcnt0;
+
+	pcnt0 = sysreg_read(PCNT0);
+	return sprintf(buf, "%lu\n", pcnt0);
+}
+static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
+			      size_t count)
+{
+	unsigned long val;
+	char *endp;
+
+	val = simple_strtoul(buf, &endp, 0);
+	if (endp == buf)
+		return -EINVAL;
+	sysreg_write(PCNT0, val);
+
+	return count;
+}
+
+static ssize_t show_pc1event(struct sys_device *dev, char *buf)
+{
+	unsigned long pccr;
+
+	pccr = sysreg_read(PCCR);
+	return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f);
+}
+static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
+			      size_t count)
+{
+	unsigned long val;
+	char *endp;
+
+	val = simple_strtoul(buf, &endp, 0);
+	if (endp == buf || val > 0x3f)
+		return -EINVAL;
+	val = (val << 18) | (sysreg_read(PCCR) & 0xff03ffff);
+	sysreg_write(PCCR, val);
+	return count;
+}
+static ssize_t show_pc1count(struct sys_device *dev, char *buf)
+{
+	unsigned long pcnt1;
+
+	pcnt1 = sysreg_read(PCNT1);
+	return sprintf(buf, "%lu\n", pcnt1);
+}
+static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
+			      size_t count)
+{
+	unsigned long val;
+	char *endp;
+
+	val = simple_strtoul(buf, &endp, 0);
+	if (endp == buf)
+		return -EINVAL;
+	sysreg_write(PCNT1, val);
+
+	return count;
+}
+
+static ssize_t show_pccycles(struct sys_device *dev, char *buf)
+{
+	unsigned long pccnt;
+
+	pccnt = sysreg_read(PCCNT);
+	return sprintf(buf, "%lu\n", pccnt);
+}
+static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
+			      size_t count)
+{
+	unsigned long val;
+	char *endp;
+
+	val = simple_strtoul(buf, &endp, 0);
+	if (endp == buf)
+		return -EINVAL;
+	sysreg_write(PCCNT, val);
+
+	return count;
+}
+
+static ssize_t show_pcenable(struct sys_device *dev, char *buf)
+{
+	unsigned long pccr;
+
+	pccr = sysreg_read(PCCR);
+	return sprintf(buf, "%c\n", (pccr & 1)?'1':'0');
+}
+static ssize_t store_pcenable(struct sys_device *dev, const char *buf,
+			      size_t count)
+{
+	unsigned long pccr, val;
+	char *endp;
+
+	val = simple_strtoul(buf, &endp, 0);
+	if (endp == buf)
+		return -EINVAL;
+	if (val)
+		val = 1;
+
+	pccr = sysreg_read(PCCR);
+	pccr = (pccr & ~1UL) | val;
+	sysreg_write(PCCR, pccr);
+
+	return count;
+}
+
+static SYSDEV_ATTR(pc0event, 0600, show_pc0event, store_pc0event);
+static SYSDEV_ATTR(pc0count, 0600, show_pc0count, store_pc0count);
+static SYSDEV_ATTR(pc1event, 0600, show_pc1event, store_pc1event);
+static SYSDEV_ATTR(pc1count, 0600, show_pc1count, store_pc1count);
+static SYSDEV_ATTR(pccycles, 0600, show_pccycles, store_pccycles);
+static SYSDEV_ATTR(pcenable, 0600, show_pcenable, store_pcenable);
+
+#endif /* CONFIG_PERFORMANCE_COUNTERS */
+
+static int __init topology_init(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct cpu *c = &per_cpu(cpu_devices, cpu);
+
+		register_cpu(c, cpu);
+
+#ifdef CONFIG_PERFORMANCE_COUNTERS
+		sysdev_create_file(&c->sysdev, &attr_pc0event);
+		sysdev_create_file(&c->sysdev, &attr_pc0count);
+		sysdev_create_file(&c->sysdev, &attr_pc1event);
+		sysdev_create_file(&c->sysdev, &attr_pc1count);
+		sysdev_create_file(&c->sysdev, &attr_pccycles);
+		sysdev_create_file(&c->sysdev, &attr_pcenable);
+#endif
+	}
+
+	return 0;
+}
+
+subsys_initcall(topology_init);
+
+static const char *cpu_names[] = {
+	"Morgan",
+	"AP7000",
+};
+#define NR_CPU_NAMES ARRAY_SIZE(cpu_names)
+
+static const char *arch_names[] = {
+	"AVR32A",
+	"AVR32B",
+};
+#define NR_ARCH_NAMES ARRAY_SIZE(arch_names)
+
+static const char *mmu_types[] = {
+	"No MMU",
+	"ITLB and DTLB",
+	"Shared TLB",
+	"MPU"
+};
+
+void __init setup_processor(void)
+{
+	unsigned long config0, config1;
+	unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
+	unsigned tmp;
+
+	config0 = sysreg_read(CONFIG0); /* 0x0000013e; */
+	config1 = sysreg_read(CONFIG1); /* 0x01f689a2; */
+	cpu_id = config0 >> 24;
+	cpu_rev = (config0 >> 16) & 0xff;
+	arch_id = (config0 >> 13) & 0x07;
+	arch_rev = (config0 >> 10) & 0x07;
+	mmu_type = (config0 >> 7) & 0x03;
+
+	boot_cpu_data.arch_type = arch_id;
+	boot_cpu_data.cpu_type = cpu_id;
+	boot_cpu_data.arch_revision = arch_rev;
+	boot_cpu_data.cpu_revision = cpu_rev;
+	boot_cpu_data.tlb_config = mmu_type;
+
+	tmp = (config1 >> 13) & 0x07;
+	if (tmp) {
+		boot_cpu_data.icache.ways = 1 << ((config1 >> 10) & 0x07);
+		boot_cpu_data.icache.sets = 1 << ((config1 >> 16) & 0x0f);
+		boot_cpu_data.icache.linesz = 1 << (tmp + 1);
+	}
+	tmp = (config1 >> 3) & 0x07;
+	if (tmp) {
+		boot_cpu_data.dcache.ways = 1 << (config1 & 0x07);
+		boot_cpu_data.dcache.sets = 1 << ((config1 >> 6) & 0x0f);
+		boot_cpu_data.dcache.linesz = 1 << (tmp + 1);
+	}
+
+	if ((cpu_id >= NR_CPU_NAMES) || (arch_id >= NR_ARCH_NAMES)) {
+		printk ("Unknown CPU configuration (ID %02x, arch %02x), "
+			"continuing anyway...\n",
+			cpu_id, arch_id);
+		return;
+	}
+
+	printk ("CPU: %s [%02x] revision %d (%s revision %d)\n",
+		cpu_names[cpu_id], cpu_id, cpu_rev,
+		arch_names[arch_id], arch_rev);
+	printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
+	printk ("CPU: features:");
+	if (config0 & (1 << 6))
+		printk(" fpu");
+	if (config0 & (1 << 5))
+		printk(" java");
+	if (config0 & (1 << 4))
+		printk(" perfctr");
+	if (config0 & (1 << 3))
+		printk(" ocd");
+	printk("\n");
+}
+
+#ifdef CONFIG_PROC_FS
+static int c_show(struct seq_file *m, void *v)
+{
+	unsigned int icache_size, dcache_size;
+	unsigned int cpu = smp_processor_id();
+
+	icache_size = boot_cpu_data.icache.ways *
+		boot_cpu_data.icache.sets *
+		boot_cpu_data.icache.linesz;
+	dcache_size = boot_cpu_data.dcache.ways *
+		boot_cpu_data.dcache.sets *
+		boot_cpu_data.dcache.linesz;
+
+	seq_printf(m, "processor\t: %d\n", cpu);
+
+	if (boot_cpu_data.arch_type < NR_ARCH_NAMES)
+		seq_printf(m, "cpu family\t: %s revision %d\n",
+			   arch_names[boot_cpu_data.arch_type],
+			   boot_cpu_data.arch_revision);
+	if (boot_cpu_data.cpu_type < NR_CPU_NAMES)
+		seq_printf(m, "cpu type\t: %s revision %d\n",
+			   cpu_names[boot_cpu_data.cpu_type],
+			   boot_cpu_data.cpu_revision);
+
+	seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n",
+		   icache_size >> 10,
+		   boot_cpu_data.icache.ways,
+		   boot_cpu_data.icache.sets,
+		   boot_cpu_data.icache.linesz);
+	seq_printf(m, "d-cache\t\t: %dK (%u ways x %u sets x %u)\n",
+		   dcache_size >> 10,
+		   boot_cpu_data.dcache.ways,
+		   boot_cpu_data.dcache.sets,
+		   boot_cpu_data.dcache.linesz);
+	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+		   boot_cpu_data.loops_per_jiffy / (500000/HZ),
+		   (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100);
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return NULL;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+
+}
+
+struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= c_show
+};
+#endif /* CONFIG_PROC_FS */

arch/avr32/kernel/entry-avr32b.S

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This file contains the low-level entry-points into the kernel, that is,
+ * exception handlers, debug trap handlers, interrupt handlers and the
+ * system call handler.
+ */
+#include <linux/errno.h>
+
+#include <asm/asm.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
+#include <asm/ocd.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/ptrace.h>
+#include <asm/sysreg.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+
+#ifdef CONFIG_PREEMPT
+# define preempt_stop		mask_interrupts
+#else
+# define preempt_stop
+# define fault_resume_kernel	fault_restore_all
+#endif
+
+#define __MASK(x)	((1 << (x)) - 1)
+#define IRQ_MASK	((__MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT) | \
+			 (__MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT))
+
+	.section .ex.text,"ax",@progbits
+	.align	2
+exception_vectors:
+	bral	handle_critical
+	.align	2
+	bral	handle_critical
+	.align	2
+	bral	do_bus_error_write
+	.align	2
+	bral	do_bus_error_read
+	.align	2
+	bral	do_nmi_ll
+	.align	2
+	bral	handle_address_fault
+	.align	2
+	bral	handle_protection_fault
+	.align	2
+	bral	handle_debug
+	.align	2
+	bral	do_illegal_opcode_ll
+	.align	2
+	bral	do_illegal_opcode_ll
+	.align	2
+	bral	do_illegal_opcode_ll
+	.align	2
+	bral	do_fpe_ll
+	.align	2
+	bral	do_illegal_opcode_ll
+	.align	2
+	bral	handle_address_fault
+	.align	2
+	bral	handle_address_fault
+	.align	2
+	bral	handle_protection_fault
+	.align	2
+	bral	handle_protection_fault
+	.align	2
+	bral	do_dtlb_modified
+
+	/*
+	 * r0 :	PGD/PT/PTE
+	 * r1 : Offending address
+	 * r2 : Scratch register
+	 * r3 : Cause (5, 12 or 13)
+	 */
+#define	tlbmiss_save	pushm	r0-r3
+#define tlbmiss_restore	popm	r0-r3
+
+	.section .tlbx.ex.text,"ax",@progbits
+	.global	itlb_miss
+itlb_miss:
+	tlbmiss_save
+	rjmp	tlb_miss_common
+
+	.section .tlbr.ex.text,"ax",@progbits
+dtlb_miss_read:
+	tlbmiss_save
+	rjmp	tlb_miss_common
+
+	.section .tlbw.ex.text,"ax",@progbits
+dtlb_miss_write:
+	tlbmiss_save
+
+	.global	tlb_miss_common
+tlb_miss_common:
+	mfsr	r0, SYSREG_PTBR
+	mfsr	r1, SYSREG_TLBEAR
+
+	/* Is it the vmalloc space? */
+	bld	r1, 31
+	brcs	handle_vmalloc_miss
+
+	/* First level lookup */
+pgtbl_lookup:
+	lsr	r2, r1, PGDIR_SHIFT
+	ld.w	r0, r0[r2 << 2]
+	bld	r0, _PAGE_BIT_PRESENT
+	brcc	page_table_not_present
+
+	/* TODO: Check access rights on page table if necessary */
+
+	/* Translate to virtual address in P1. */
+	andl	r0, 0xf000
+	sbr	r0, 31
+
+	/* Second level lookup */
+	lsl	r1, (32 - PGDIR_SHIFT)
+	lsr	r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT
+	add	r2, r0, r1 << 2
+	ld.w	r1, r2[0]
+	bld	r1, _PAGE_BIT_PRESENT
+	brcc	page_not_present
+
+	/* Mark the page as accessed */
+	sbr	r1, _PAGE_BIT_ACCESSED
+	st.w	r2[0], r1
+
+	/* Drop software flags */
+	andl	r1, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
+	mtsr	SYSREG_TLBELO, r1
+
+	/* Figure out which entry we want to replace */
+	mfsr	r0, SYSREG_TLBARLO
+	clz	r2, r0
+	brcc	1f
+	mov	r1, -1			/* All entries have been accessed, */
+	mtsr	SYSREG_TLBARLO, r1	/* so reset TLBAR */
+	mov	r2, 0			/* and start at 0 */
+1:	mfsr	r1, SYSREG_MMUCR
+	lsl	r2, 14
+	andl	r1, 0x3fff, COH
+	or	r1, r2
+	mtsr	SYSREG_MMUCR, r1
+
+	tlbw
+
+	tlbmiss_restore
+	rete
+
+handle_vmalloc_miss:
+	/* Simply do the lookup in init's page table */
+	mov	r0, lo(swapper_pg_dir)
+	orh	r0, hi(swapper_pg_dir)
+	rjmp	pgtbl_lookup
+
+
+	/* ---                    System Call                    --- */
+
+	.section .scall.text,"ax",@progbits
+system_call:
+	pushm	r12		/* r12_orig */
+	stmts	--sp, r0-lr
+	zero_fp
+	mfsr	r0, SYSREG_RAR_SUP
+	mfsr	r1, SYSREG_RSR_SUP
+	stm	--sp, r0-r1
+
+	/* check for syscall tracing */
+	get_thread_info r0
+	ld.w	r1, r0[TI_flags]
+	bld	r1, TIF_SYSCALL_TRACE
+	brcs	syscall_trace_enter
+
+syscall_trace_cont:
+	cp.w	r8, NR_syscalls
+	brhs	syscall_badsys
+
+	lddpc   lr, syscall_table_addr
+	ld.w    lr, lr[r8 << 2]
+	mov	r8, r5		/* 5th argument (6th is pushed by stub) */
+	icall   lr
+
+	.global	syscall_return
+syscall_return:
+	get_thread_info r0
+	mask_interrupts		/* make sure we don't miss an interrupt
+				   setting need_resched or sigpending
+				   between sampling and the rets */
+
+	/* Store the return value so that the correct value is loaded below */
+	stdsp   sp[REG_R12], r12
+
+	ld.w	r1, r0[TI_flags]
+	andl	r1, _TIF_ALLWORK_MASK, COH
+	brne	syscall_exit_work
+
+syscall_exit_cont:
+	popm	r8-r9
+	mtsr	SYSREG_RAR_SUP, r8
+	mtsr	SYSREG_RSR_SUP, r9
+	ldmts	sp++, r0-lr
+	sub	sp, -4		/* r12_orig */
+	rets
+
+	.align	2
+syscall_table_addr:
+	.long   sys_call_table
+
+syscall_badsys:
+	mov	r12, -ENOSYS
+	rjmp	syscall_return
+
+	.global ret_from_fork
+ret_from_fork:
+	rcall   schedule_tail
+
+	/* check for syscall tracing */
+	get_thread_info r0
+	ld.w	r1, r0[TI_flags]
+	andl	r1, _TIF_ALLWORK_MASK, COH
+	brne	syscall_exit_work
+	rjmp    syscall_exit_cont
+
+syscall_trace_enter:
+	pushm	r8-r12
+	rcall	syscall_trace
+	popm	r8-r12
+	rjmp	syscall_trace_cont
+
+syscall_exit_work:
+	bld	r1, TIF_SYSCALL_TRACE
+	brcc	1f
+	unmask_interrupts
+	rcall	syscall_trace
+	mask_interrupts
+	ld.w	r1, r0[TI_flags]
+
+1:	bld	r1, TIF_NEED_RESCHED
+	brcc	2f
+	unmask_interrupts
+	rcall	schedule
+	mask_interrupts
+	ld.w	r1, r0[TI_flags]
+	rjmp	1b
+
+2:	mov	r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK
+	tst	r1, r2
+	breq	3f
+	unmask_interrupts
+	mov	r12, sp
+	mov	r11, r0
+	rcall	do_notify_resume
+	mask_interrupts
+	ld.w	r1, r0[TI_flags]
+	rjmp	1b
+
+3:	bld	r1, TIF_BREAKPOINT
+	brcc	syscall_exit_cont
+	mfsr	r3, SYSREG_TLBEHI
+	lddsp	r2, sp[REG_PC]
+	andl	r3, 0xff, COH
+	lsl	r3, 1
+	sbr	r3, 30
+	sbr	r3, 0
+	mtdr	DBGREG_BWA2A, r2
+	mtdr	DBGREG_BWC2A, r3
+	rjmp	syscall_exit_cont
+
+
+	/* The slow path of the TLB miss handler */
+page_table_not_present:
+page_not_present:
+	tlbmiss_restore
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	rcall	save_full_context_ex
+	mfsr	r12, SYSREG_ECR
+	mov	r11, sp
+	rcall	do_page_fault
+	rjmp	ret_from_exception
+
+	/* This function expects to find offending PC in SYSREG_RAR_EX */
+save_full_context_ex:
+	mfsr	r8, SYSREG_RSR_EX
+	mov	r12, r8
+	andh	r8, (MODE_MASK >> 16), COH
+	mfsr	r11, SYSREG_RAR_EX
+	brne	2f
+
+1:	pushm	r11, r12	/* PC and SR */
+	unmask_exceptions
+	ret	r12
+
+2:	sub	r10, sp, -(FRAME_SIZE_FULL - REG_LR)
+	stdsp	sp[4], r10	/* replace saved SP */
+	rjmp	1b
+
+	/* Low-level exception handlers */
+handle_critical:
+	pushm	r12
+	pushm	r0-r12
+	rcall	save_full_context_ex
+	mfsr	r12, SYSREG_ECR
+	mov	r11, sp
+	rcall	do_critical_exception
+
+	/* We should never get here... */
+bad_return:
+	sub	r12, pc, (. - 1f)
+	bral	panic
+	.align	2
+1:	.asciz	"Return from critical exception!"
+
+	.align	1
+do_bus_error_write:
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	rcall	save_full_context_ex
+	mov	r11, 1
+	rjmp	1f
+
+do_bus_error_read:
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	rcall	save_full_context_ex
+	mov	r11, 0
+1:	mfsr	r12, SYSREG_BEAR
+	mov	r10, sp
+	rcall	do_bus_error
+	rjmp	ret_from_exception
+
+	.align	1
+do_nmi_ll:
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	/* FIXME: Make sure RAR_NMI and RSR_NMI are pushed instead of *_EX */
+	rcall	save_full_context_ex
+	mfsr	r12, SYSREG_ECR
+	mov	r11, sp
+	rcall	do_nmi
+	rjmp	bad_return
+
+handle_address_fault:
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	rcall	save_full_context_ex
+	mfsr	r12, SYSREG_ECR
+	mov	r11, sp
+	rcall	do_address_exception
+	rjmp	ret_from_exception
+
+handle_protection_fault:
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	rcall	save_full_context_ex
+	mfsr	r12, SYSREG_ECR
+	mov	r11, sp
+	rcall	do_page_fault
+	rjmp	ret_from_exception
+
+	.align	1
+do_illegal_opcode_ll:
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	rcall	save_full_context_ex
+	mfsr	r12, SYSREG_ECR
+	mov	r11, sp
+	rcall	do_illegal_opcode
+	rjmp	ret_from_exception
+
+do_dtlb_modified:
+	pushm	r0-r3
+	mfsr	r1, SYSREG_TLBEAR
+	mfsr	r0, SYSREG_PTBR
+	lsr	r2, r1, PGDIR_SHIFT
+	ld.w	r0, r0[r2 << 2]
+	lsl	r1, (32 - PGDIR_SHIFT)
+	lsr	r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT
+
+	/* Translate to virtual address in P1 */
+	andl	r0, 0xf000
+	sbr	r0, 31
+	add	r2, r0, r1 << 2
+	ld.w	r3, r2[0]
+	sbr	r3, _PAGE_BIT_DIRTY
+	mov	r0, r3
+	st.w	r2[0], r3
+
+	/* The page table is up-to-date. Update the TLB entry as well */
+	andl	r0, lo(_PAGE_FLAGS_HARDWARE_MASK)
+	mtsr	SYSREG_TLBELO, r0
+
+	/* MMUCR[DRP] is updated automatically, so let's go... */
+	tlbw
+
+	popm	r0-r3
+	rete
+
+do_fpe_ll:
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	rcall	save_full_context_ex
+	unmask_interrupts
+	mov	r12, 26
+	mov	r11, sp
+	rcall	do_fpe
+	rjmp	ret_from_exception
+
+ret_from_exception:
+	mask_interrupts
+	lddsp	r4, sp[REG_SR]
+	andh	r4, (MODE_MASK >> 16), COH
+	brne	fault_resume_kernel
+
+	get_thread_info r0
+	ld.w	r1, r0[TI_flags]
+	andl	r1, _TIF_WORK_MASK, COH
+	brne	fault_exit_work
+
+fault_resume_user:
+	popm	r8-r9
+	mask_exceptions
+	mtsr	SYSREG_RAR_EX, r8
+	mtsr	SYSREG_RSR_EX, r9
+	ldmts	sp++, r0-lr
+	sub	sp, -4
+	rete
+
+fault_resume_kernel:
+#ifdef CONFIG_PREEMPT
+	get_thread_info	r0
+	ld.w	r2, r0[TI_preempt_count]
+	cp.w	r2, 0
+	brne	1f
+	ld.w	r1, r0[TI_flags]
+	bld	r1, TIF_NEED_RESCHED
+	brcc	1f
+	lddsp	r4, sp[REG_SR]
+	bld	r4, SYSREG_GM_OFFSET
+	brcs	1f
+	rcall	preempt_schedule_irq
+1:
+#endif
+
+	popm	r8-r9
+	mask_exceptions
+	mfsr	r1, SYSREG_SR
+	mtsr	SYSREG_RAR_EX, r8
+	mtsr	SYSREG_RSR_EX, r9
+	popm	lr
+	sub	sp, -4		/* ignore SP */
+	popm	r0-r12
+	sub	sp, -4		/* ignore r12_orig */
+	rete
+
+irq_exit_work:
+	/* Switch to exception mode so that we can share the same code. */
+	mfsr	r8, SYSREG_SR
+	cbr	r8, SYSREG_M0_OFFSET
+	orh	r8, hi(SYSREG_BIT(M1) | SYSREG_BIT(M2))
+	mtsr	SYSREG_SR, r8
+	sub	pc, -2
+	get_thread_info r0
+	ld.w	r1, r0[TI_flags]
+
+fault_exit_work:
+	bld	r1, TIF_NEED_RESCHED
+	brcc	1f
+	unmask_interrupts
+	rcall	schedule
+	mask_interrupts
+	ld.w	r1, r0[TI_flags]
+	rjmp	fault_exit_work
+
+1:	mov	r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK
+	tst	r1, r2
+	breq	2f
+	unmask_interrupts
+	mov	r12, sp
+	mov	r11, r0
+	rcall	do_notify_resume
+	mask_interrupts
+	ld.w	r1, r0[TI_flags]
+	rjmp	fault_exit_work
+
+2:	bld	r1, TIF_BREAKPOINT
+	brcc	fault_resume_user
+	mfsr	r3, SYSREG_TLBEHI
+	lddsp	r2, sp[REG_PC]
+	andl	r3, 0xff, COH
+	lsl	r3, 1
+	sbr	r3, 30
+	sbr	r3, 0
+	mtdr	DBGREG_BWA2A, r2
+	mtdr	DBGREG_BWC2A, r3
+	rjmp	fault_resume_user
+
+	/* If we get a debug trap from privileged context we end up here */
+handle_debug_priv:
+	/* Fix up LR and SP in regs. r11 contains the mode we came from */
+	mfsr	r8, SYSREG_SR
+	mov	r9, r8
+	andh	r8, hi(~MODE_MASK)
+	or	r8, r11
+	mtsr	SYSREG_SR, r8
+	sub	pc, -2
+	stdsp	sp[REG_LR], lr
+	mtsr	SYSREG_SR, r9
+	sub	pc, -2
+	sub	r10, sp, -FRAME_SIZE_FULL
+	stdsp	sp[REG_SP], r10
+	mov	r12, sp
+	rcall	do_debug_priv
+
+	/* Now, put everything back */
+	ssrf	SR_EM_BIT
+	popm	r10, r11
+	mtsr	SYSREG_RAR_DBG, r10
+	mtsr	SYSREG_RSR_DBG, r11
+	mfsr	r8, SYSREG_SR
+	mov	r9, r8
+	andh	r8, hi(~MODE_MASK)
+	andh	r11, hi(MODE_MASK)
+	or	r8, r11
+	mtsr	SYSREG_SR, r8
+	sub	pc, -2
+	popm	lr
+	mtsr	SYSREG_SR, r9
+	sub	pc, -2
+	sub	sp, -4		/* skip SP */
+	popm	r0-r12
+	sub	sp, -4
+	retd
+
+	/*
+	 * At this point, everything is masked, that is, interrupts,
+	 * exceptions and debugging traps. We might get called from
+	 * interrupt or exception context in some rare cases, but this
+	 * will be taken care of by do_debug(), so we're not going to
+	 * do a 100% correct context save here.
+	 */
+handle_debug:
+	sub	sp, 4		/* r12_orig */
+	stmts	--sp, r0-lr
+	mfsr	r10, SYSREG_RAR_DBG
+	mfsr	r11, SYSREG_RSR_DBG
+	unmask_exceptions
+	pushm	r10,r11
+	andh	r11, (MODE_MASK >> 16), COH
+	brne	handle_debug_priv
+
+	mov	r12, sp
+	rcall	do_debug
+
+	lddsp	r10, sp[REG_SR]
+	andh	r10, (MODE_MASK >> 16), COH
+	breq	debug_resume_user
+
+debug_restore_all:
+	popm	r10,r11
+	mask_exceptions
+	mtsr	SYSREG_RSR_DBG, r11
+	mtsr	SYSREG_RAR_DBG, r10
+	ldmts	sp++, r0-lr
+	sub	sp, -4
+	retd
+
+debug_resume_user:
+	get_thread_info r0
+	mask_interrupts
+
+	ld.w	r1, r0[TI_flags]
+	andl	r1, _TIF_DBGWORK_MASK, COH
+	breq	debug_restore_all
+
+1:	bld	r1, TIF_NEED_RESCHED
+	brcc	2f
+	unmask_interrupts
+	rcall	schedule
+	mask_interrupts
+	ld.w	r1, r0[TI_flags]
+	rjmp	1b
+
+2:	mov	r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK
+	tst	r1, r2
+	breq	3f
+	unmask_interrupts
+	mov	r12, sp
+	mov	r11, r0
+	rcall	do_notify_resume
+	mask_interrupts
+	ld.w	r1, r0[TI_flags]
+	rjmp	1b
+
+3:	bld	r1, TIF_SINGLE_STEP
+	brcc	debug_restore_all
+	mfdr	r2, DBGREG_DC
+	sbr	r2, DC_SS_BIT
+	mtdr	DBGREG_DC, r2
+	rjmp	debug_restore_all
+
+	.set	rsr_int0,	SYSREG_RSR_INT0
+	.set	rsr_int1,	SYSREG_RSR_INT1
+	.set	rsr_int2,	SYSREG_RSR_INT2
+	.set	rsr_int3,	SYSREG_RSR_INT3
+	.set	rar_int0,	SYSREG_RAR_INT0
+	.set	rar_int1,	SYSREG_RAR_INT1
+	.set	rar_int2,	SYSREG_RAR_INT2
+	.set	rar_int3,	SYSREG_RAR_INT3
+
+	.macro	IRQ_LEVEL level
+	.type	irq_level\level, @function
+irq_level\level:
+	sub	sp, 4		/* r12_orig */
+	stmts	--sp,r0-lr
+	mfsr	r8, rar_int\level
+	mfsr	r9, rsr_int\level
+	pushm	r8-r9
+
+	mov	r11, sp
+	mov	r12, \level
+
+	rcall	do_IRQ
+
+	lddsp	r4, sp[REG_SR]
+	andh	r4, (MODE_MASK >> 16), COH
+#ifdef CONFIG_PREEMPT
+	brne	2f
+#else
+	brne	1f
+#endif
+
+	get_thread_info	r0
+	ld.w	r1, r0[TI_flags]
+	andl	r1, _TIF_WORK_MASK, COH
+	brne	irq_exit_work
+
+1:	popm	r8-r9
+	mtsr	rar_int\level, r8
+	mtsr	rsr_int\level, r9
+	ldmts	sp++,r0-lr
+	sub	sp, -4		/* ignore r12_orig */
+	rete
+
+#ifdef CONFIG_PREEMPT
+2:
+	get_thread_info	r0
+	ld.w	r2, r0[TI_preempt_count]
+	cp.w	r2, 0
+	brne	1b
+	ld.w	r1, r0[TI_flags]
+	bld	r1, TIF_NEED_RESCHED
+	brcc	1b
+	lddsp	r4, sp[REG_SR]
+	bld	r4, SYSREG_GM_OFFSET
+	brcs	1b
+	rcall	preempt_schedule_irq
+	rjmp	1b
+#endif
+	.endm
+
+	.section .irq.text,"ax",@progbits
+
+	.global	irq_level0
+	.global	irq_level1
+	.global	irq_level2
+	.global	irq_level3
+	IRQ_LEVEL 0
+	IRQ_LEVEL 1
+	IRQ_LEVEL 2
+	IRQ_LEVEL 3

arch/avr32/kernel/head.S

+/*
+ * Non-board-specific low-level startup code
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+
+#include <asm/page.h>
+#include <asm/thread_info.h>
+#include <asm/sysreg.h>
+
+	.section .init.text,"ax"
+	.global kernel_entry
+kernel_entry:
+	/* Initialize status register */
+	lddpc   r0, init_sr
+	mtsr	SYSREG_SR, r0
+
+	/* Set initial stack pointer */
+	lddpc   sp, stack_addr
+	sub	sp, -THREAD_SIZE
+
+#ifdef CONFIG_FRAME_POINTER
+	/* Mark last stack frame */
+	mov	lr, 0
+	mov	r7, 0
+#endif
+
+	/* Set up the PIO, SDRAM controller, early printk, etc. */
+	rcall	board_early_init
+
+	/* Start the show */
+	lddpc   pc, kernel_start_addr
+
+	.align  2
+init_sr:
+	.long   0x007f0000	/* Supervisor mode, everything masked */
+stack_addr:
+	.long   init_thread_union
+kernel_start_addr:
+	.long   start_kernel

arch/avr32/kernel/init_task.c

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+
+#include <asm/pgtable.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure. Must be aligned on an 8192-byte boundary.
+ */
+union thread_union init_thread_union
+	__attribute__((__section__(".data.init_task"))) =
+		{ INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+
+EXPORT_SYMBOL(init_task);

arch/avr32/kernel/irq.c

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * Based on arch/i386/kernel/irq.c
+ *   Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the code used by various IRQ handling routines:
+ * asking for different IRQ's should be done through these routines
+ * instead of just grabbing them. Thus setups with different IRQ numbers
+ * shouldn't result in any weird surprises, and installing new handlers
+ * should be easier.
+ *
+ * IRQ's are in fact implemented a bit like signal handlers for the kernel.
+ * Naturally it's not a 1:1 relation, but there are similarities.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/sysdev.h>
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+	printk("unexpected IRQ %u\n", irq);
+}
+
+#ifdef CONFIG_PROC_FS
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *)v, cpu;
+	struct irqaction *action;
+	unsigned long flags;
+
+	if (i == 0) {
+		seq_puts(p, "           ");
+		for_each_online_cpu(cpu)
+			seq_printf(p, "CPU%d       ", cpu);
+		seq_putc(p, '\n');
+	}
+
+	if (i < NR_IRQS) {
+		spin_lock_irqsave(&irq_desc[i].lock, flags);
+		action = irq_desc[i].action;
+		if (!action)
+			goto unlock;
+
+		seq_printf(p, "%3d: ", i);
+		for_each_online_cpu(cpu)
+			seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+		seq_printf(p, "  %s", action->name);
+		for (action = action->next; action; action = action->next)
+			seq_printf(p, ", %s", action->name);
+
+		seq_putc(p, '\n');
+	unlock:
+		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+	}
+
+	return 0;
+}
+#endif

arch/avr32/kernel/kprobes.c

+/*
+ *  Kernel Probes (KProbes)
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * Based on arch/ppc64/kernel/kprobes.c
+ *  Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+
+#include <asm/cacheflush.h>
+#include <asm/kdebug.h>
+#include <asm/ocd.h>
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe);
+static unsigned long kprobe_status;
+static struct pt_regs jprobe_saved_regs;
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	int ret = 0;
+
+	if ((unsigned long)p->addr & 0x01) {
+		printk("Attempt to register kprobe at an unaligned address\n");
+		ret = -EINVAL;
+	}
+
+	/* XXX: Might be a good idea to check if p->addr is a valid
+	 * kernel address as well... */
+
+	if (!ret) {
+		pr_debug("copy kprobe at %p\n", p->addr);
+		memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+		p->opcode = *p->addr;
+	}
+
+	return ret;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	pr_debug("arming kprobe at %p\n", p->addr);
+	*p->addr = BREAKPOINT_INSTRUCTION;
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	pr_debug("disarming kprobe at %p\n", p->addr);
+	*p->addr = p->opcode;
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+	unsigned long dc;
+
+	pr_debug("preparing to singlestep over %p (PC=%08lx)\n",
+		 p->addr, regs->pc);
+
+	BUG_ON(!(sysreg_read(SR) & SYSREG_BIT(SR_D)));
+
+	dc = __mfdr(DBGREG_DC);
+	dc |= DC_SS;
+	__mtdr(DBGREG_DC, dc);
+
+	/*
+	 * We must run the instruction from its original location
+	 * since it may actually reference PC.
+	 *
+	 * TODO: Do the instruction replacement directly in icache.
+	 */
+	*p->addr = p->opcode;
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
+{
+	unsigned long dc;
+
+	pr_debug("resuming execution at PC=%08lx\n", regs->pc);
+
+	dc = __mfdr(DBGREG_DC);
+	dc &= ~DC_SS;
+	__mtdr(DBGREG_DC, dc);
+
+	*p->addr = BREAKPOINT_INSTRUCTION;
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p)
+{
+	__get_cpu_var(current_kprobe) = p;
+}
+
+static int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *p;
+	void *addr = (void *)regs->pc;
+	int ret = 0;
+
+	pr_debug("kprobe_handler: kprobe_running=%d\n",
+		 kprobe_running());
+
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
+	preempt_disable();
+
+	/* Check that we're not recursing */
+	if (kprobe_running()) {
+		p = get_kprobe(addr);
+		if (p) {
+			if (kprobe_status == KPROBE_HIT_SS) {
+				printk("FIXME: kprobe hit while single-stepping!\n");
+				goto no_kprobe;
+			}
+
+			printk("FIXME: kprobe hit while handling another kprobe\n");
+			goto no_kprobe;
+		} else {
+			p = kprobe_running();
+			if (p->break_handler && p->break_handler(p, regs))
+				goto ss_probe;
+		}
+		/* If it's not ours, can't be delete race, (we hold lock). */
+		goto no_kprobe;
+	}
+
+	p = get_kprobe(addr);
+	if (!p)
+		goto no_kprobe;
+
+	kprobe_status = KPROBE_HIT_ACTIVE;
+	set_current_kprobe(p);
+	if (p->pre_handler && p->pre_handler(p, regs))
+		/* handler has already set things up, so skip ss setup */
+		return 1;
+
+ss_probe:
+	prepare_singlestep(p, regs);
+	kprobe_status = KPROBE_HIT_SS;
+	return 1;
+
+no_kprobe:
+	return ret;
+}
+
+static int __kprobes post_kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+
+	pr_debug("post_kprobe_handler, cur=%p\n", cur);
+
+	if (!cur)
+		return 0;
+
+	if (cur->post_handler) {
+		kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
+	}
+
+	resume_execution(cur, regs);
+	reset_current_kprobe();
+	preempt_enable_no_resched();
+
+	return 1;
+}
+
+static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+
+	pr_debug("kprobe_fault_handler: trapnr=%d\n", trapnr);
+
+	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+		return 1;
+
+	if (kprobe_status & KPROBE_HIT_SS) {
+		resume_execution(cur, regs);
+		preempt_enable_no_resched();
+	}
+	return 0;
+}
+
+/*
+ * Wrapper routine to for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+				       unsigned long val, void *data)
+{
+	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+
+	pr_debug("kprobe_exceptions_notify: val=%lu, data=%p\n",
+		 val, data);
+
+	switch (val) {
+	case DIE_BREAKPOINT:
+		if (kprobe_handler(args->regs))
+			ret = NOTIFY_STOP;
+		break;
+	case DIE_SSTEP:
+		if (post_kprobe_handler(args->regs))
+			ret = NOTIFY_STOP;
+		break;
+	case DIE_FAULT:
+		if (kprobe_running()
+		    && kprobe_fault_handler(args->regs, args->trapnr))
+			ret = NOTIFY_STOP;
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+	memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs));
+
+	/*
+	 * TODO: We should probably save some of the stack here as
+	 * well, since gcc may pass arguments on the stack for certain
+	 * functions (lots of arguments, large aggregates, varargs)
+	 */
+
+	/* setup return addr to the jprobe handler routine */
+	regs->pc = (unsigned long)jp->entry;
+	return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+	asm volatile("breakpoint" ::: "memory");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	/*
+	 * FIXME - we should ideally be validating that we got here 'cos
+	 * of the "trap" in jprobe_return() above, before restoring the
+	 * saved regs...
+	 */
+	memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs));
+	return 1;
+}
+
+int __init arch_init_kprobes(void)
+{
+	printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
+	__mtdr(DBGREG_DC, DC_MM | DC_DBE);
+
+	/* TODO: Register kretprobe trampoline */
+	return 0;
+}

arch/avr32/kernel/module.c

+/*
+ * AVR32-specific kernel module loader
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * GOT initialization parts are based on the s390 version
+ *   Copyright (C) 2002, 2003 IBM Deutschland Entwicklung GmbH,
+ *                            IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+	return vmalloc(size);
+}
+
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(mod->arch.syminfo);
+	mod->arch.syminfo = NULL;
+
+	vfree(module_region);
+	/* FIXME: if module_region == mod->init_region, trim exception
+	 * table entries. */
+}
+
+static inline int check_rela(Elf32_Rela *rela, struct module *module,
+			     char *strings, Elf32_Sym *symbols)
+{
+	struct mod_arch_syminfo *info;
+
+	info = module->arch.syminfo + ELF32_R_SYM(rela->r_info);
+	switch (ELF32_R_TYPE(rela->r_info)) {
+	case R_AVR32_GOT32:
+	case R_AVR32_GOT16:
+	case R_AVR32_GOT8:
+	case R_AVR32_GOT21S:
+	case R_AVR32_GOT18SW:	/* mcall */
+	case R_AVR32_GOT16S:	/* ld.w */
+		if (rela->r_addend != 0) {
+			printk(KERN_ERR
+			       "GOT relocation against %s at offset %u with addend\n",
+			       strings + symbols[ELF32_R_SYM(rela->r_info)].st_name,
+			       rela->r_offset);
+			return -ENOEXEC;
+		}
+		if (info->got_offset == -1UL) {
+			info->got_offset = module->arch.got_size;
+			module->arch.got_size += sizeof(void *);
+		}
+		pr_debug("GOT[%3lu] %s\n", info->got_offset,
+			 strings + symbols[ELF32_R_SYM(rela->r_info)].st_name);
+		break;
+	}
+
+	return 0;
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+			      char *secstrings, struct module *module)
+{
+	Elf32_Shdr *symtab;
+	Elf32_Sym *symbols;
+	Elf32_Rela *rela;
+	char *strings;
+	int nrela, i, j;
+	int ret;
+
+	/* Find the symbol table */
+	symtab = NULL;
+	for (i = 0; i < hdr->e_shnum; i++)
+		switch (sechdrs[i].sh_type) {
+		case SHT_SYMTAB:
+			symtab = &sechdrs[i];
+			break;
+		}
+	if (!symtab) {
+		printk(KERN_ERR "module %s: no symbol table\n", module->name);
+		return -ENOEXEC;
+	}
+
+	/* Allocate room for one syminfo structure per symbol. */
+	module->arch.nsyms = symtab->sh_size / sizeof(Elf_Sym);
+	module->arch.syminfo = vmalloc(module->arch.nsyms
+				   * sizeof(struct mod_arch_syminfo));
+	if (!module->arch.syminfo)
+		return -ENOMEM;
+
+	symbols = (void *)hdr + symtab->sh_offset;
+	strings = (void *)hdr + sechdrs[symtab->sh_link].sh_offset;
+	for (i = 0; i < module->arch.nsyms; i++) {
+		if (symbols[i].st_shndx == SHN_UNDEF &&
+		    strcmp(strings + symbols[i].st_name,
+			   "_GLOBAL_OFFSET_TABLE_") == 0)
+			/* "Define" it as absolute. */
+			symbols[i].st_shndx = SHN_ABS;
+		module->arch.syminfo[i].got_offset = -1UL;
+		module->arch.syminfo[i].got_initialized = 0;
+	}
+
+	/* Allocate GOT entries for symbols that need it. */
+	module->arch.got_size = 0;
+	for (i = 0; i < hdr->e_shnum; i++) {
+		if (sechdrs[i].sh_type != SHT_RELA)
+			continue;
+		nrela = sechdrs[i].sh_size / sizeof(Elf32_Rela);
+		rela = (void *)hdr + sechdrs[i].sh_offset;
+		for (j = 0; j < nrela; j++) {
+			ret = check_rela(rela + j, module,
+					 strings, symbols);
+			if (ret)
+				goto out_free_syminfo;
+		}
+	}
+
+	/*
+	 * Increase core size to make room for GOT and set start
+	 * offset for GOT.
+	 */
+	module->core_size = ALIGN(module->core_size, 4);
+	module->arch.got_offset = module->core_size;
+	module->core_size += module->arch.got_size;
+
+	return 0;
+
+out_free_syminfo:
+	vfree(module->arch.syminfo);
+	module->arch.syminfo = NULL;
+
+	return ret;
+}
+
+static inline int reloc_overflow(struct module *module, const char *reloc_name,
+				 Elf32_Addr relocation)
+{
+	printk(KERN_ERR "module %s: Value %lx does not fit relocation %s\n",
+	       module->name, (unsigned long)relocation, reloc_name);
+	return -ENOEXEC;
+}
+
+#define get_u16(loc)		(*((uint16_t *)loc))
+#define put_u16(loc, val)	(*((uint16_t *)loc) = (val))
+
+int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
+		       unsigned int symindex, unsigned int relindex,
+		       struct module *module)
+{
+	Elf32_Shdr *symsec = sechdrs + symindex;
+	Elf32_Shdr *relsec = sechdrs + relindex;
+	Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
+	Elf32_Rela *rel = (void *)relsec->sh_addr;
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rela); i++, rel++) {
+		struct mod_arch_syminfo *info;
+		Elf32_Sym *sym;
+		Elf32_Addr relocation;
+		uint32_t *location;
+		uint32_t value;
+
+		location = (void *)dstsec->sh_addr + rel->r_offset;
+		sym = (Elf32_Sym *)symsec->sh_addr + ELF32_R_SYM(rel->r_info);
+		relocation = sym->st_value + rel->r_addend;
+
+		info = module->arch.syminfo + ELF32_R_SYM(rel->r_info);
+
+		/* Initialize GOT entry if necessary */
+		switch (ELF32_R_TYPE(rel->r_info)) {
+		case R_AVR32_GOT32:
+		case R_AVR32_GOT16:
+		case R_AVR32_GOT8:
+		case R_AVR32_GOT21S:
+		case R_AVR32_GOT18SW:
+		case R_AVR32_GOT16S:
+			if (!info->got_initialized) {
+				Elf32_Addr *gotent;
+
+				gotent = (module->module_core
+					  + module->arch.got_offset
+					  + info->got_offset);
+				*gotent = relocation;
+				info->got_initialized = 1;
+			}
+
+			relocation = info->got_offset;
+			break;
+		}
+
+		switch (ELF32_R_TYPE(rel->r_info)) {
+		case R_AVR32_32:
+		case R_AVR32_32_CPENT:
+			*location = relocation;
+			break;
+		case R_AVR32_22H_PCREL:
+			relocation -= (Elf32_Addr)location;
+			if ((relocation & 0xffe00001) != 0
+			    && (relocation & 0xffc00001) != 0xffc00000)
+				return reloc_overflow(module,
+						      "R_AVR32_22H_PCREL",
+						      relocation);
+			relocation >>= 1;
+
+			value = *location;
+			value = ((value & 0xe1ef0000)
+				 | (relocation & 0xffff)
+				 | ((relocation & 0x10000) << 4)
+				 | ((relocation & 0x1e0000) << 8));
+			*location = value;
+			break;
+		case R_AVR32_11H_PCREL:
+			relocation -= (Elf32_Addr)location;
+			if ((relocation & 0xfffffc01) != 0
+			    && (relocation & 0xfffff801) != 0xfffff800)
+				return reloc_overflow(module,
+						      "R_AVR32_11H_PCREL",
+						      relocation);
+			value = get_u16(location);
+			value = ((value & 0xf00c)
+				 | ((relocation & 0x1fe) << 3)
+				 | ((relocation & 0x600) >> 9));
+			put_u16(location, value);
+			break;
+		case R_AVR32_9H_PCREL:
+			relocation -= (Elf32_Addr)location;
+			if ((relocation & 0xffffff01) != 0
+			    && (relocation & 0xfffffe01) != 0xfffffe00)
+				return reloc_overflow(module,
+						      "R_AVR32_9H_PCREL",
+						      relocation);
+			value = get_u16(location);
+			value = ((value & 0xf00f)
+				 | ((relocation & 0x1fe) << 3));
+			put_u16(location, value);
+			break;
+		case R_AVR32_9UW_PCREL:
+			relocation -= ((Elf32_Addr)location) & 0xfffffffc;
+			if ((relocation & 0xfffffc03) != 0)
+				return reloc_overflow(module,
+						      "R_AVR32_9UW_PCREL",
+						      relocation);
+			value = get_u16(location);
+			value = ((value & 0xf80f)
+				 | ((relocation & 0x1fc) << 2));
+			put_u16(location, value);
+			break;
+		case R_AVR32_GOTPC:
+			/*
+			 * R6 = PC - (PC - GOT)
+			 *
+			 * At this point, relocation contains the
+			 * value of PC.  Just subtract the value of
+			 * GOT, and we're done.
+			 */
+			pr_debug("GOTPC: PC=0x%lx, got_offset=0x%lx, core=0x%p\n",
+				 relocation, module->arch.got_offset,
+				 module->module_core);
+			relocation -= ((unsigned long)module->module_core
+				       + module->arch.got_offset);
+			*location = relocation;
+			break;
+		case R_AVR32_GOT18SW:
+			if ((relocation & 0xfffe0003) != 0
+			    && (relocation & 0xfffc0003) != 0xffff0000)
+				return reloc_overflow(module, "R_AVR32_GOT18SW",
+						     relocation);
+			relocation >>= 2;
+			/* fall through */
+		case R_AVR32_GOT16S:
+			if ((relocation & 0xffff8000) != 0
+			    && (relocation & 0xffff0000) != 0xffff0000)
+				return reloc_overflow(module, "R_AVR32_GOT16S",
+						      relocation);
+			pr_debug("GOT reloc @ 0x%lx -> %lu\n",
+				 rel->r_offset, relocation);
+			value = *location;
+			value = ((value & 0xffff0000)
+				 | (relocation & 0xffff));
+			*location = value;
+			break;
+
+		default:
+			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+			       module->name, ELF32_R_TYPE(rel->r_info));
+			return -ENOEXEC;
+		}
+	}
+
+	return ret;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs, const char *strtab,
+		   unsigned int symindex, unsigned int relindex,
+		   struct module *module)
+{
+	printk(KERN_ERR "module %s: REL relocations are not supported\n",
+		module->name);
+	return -ENOEXEC;
+}
+
+int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+		    struct module *module)
+{
+	vfree(module->arch.syminfo);
+	module->arch.syminfo = NULL;
+
+	return 0;
+}
+
+void module_arch_cleanup(struct module *module)
+{
+
+}

arch/avr32/kernel/process.c

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/fs.h>
+#include <linux/ptrace.h>
+#include <linux/reboot.h>
+#include <linux/unistd.h>
+
+#include <asm/sysreg.h>
+#include <asm/ocd.h>
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+void cpu_idle(void)
+{
+	/* endless idle loop with no priority at all */
+	while (1) {
+		/* TODO: Enter sleep mode */
+		while (!need_resched())
+			cpu_relax();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
+}
+
+void machine_halt(void)
+{
+}
+
+void machine_power_off(void)
+{
+}
+
+void machine_restart(char *cmd)
+{
+	__mtdr(DBGREG_DC, DC_DBE);
+	__mtdr(DBGREG_DC, DC_RES);
+	while (1) ;
+}
+
+/*
+ * PC is actually discarded when returning from a system call -- the
+ * return address must be stored in LR. This function will make sure
+ * LR points to do_exit before starting the thread.
+ *
+ * Also, when returning from fork(), r12 is 0, so we must copy the
+ * argument as well.
+ *
+ *  r0 : The argument to the main thread function
+ *  r1 : The address of do_exit
+ *  r2 : The address of the main thread function
+ */
+asmlinkage extern void kernel_thread_helper(void);
+__asm__("	.type	kernel_thread_helper, @function\n"
+	"kernel_thread_helper:\n"
+	"	mov	r12, r0\n"
+	"	mov	lr, r2\n"
+	"	mov	pc, r1\n"
+	"	.size	kernel_thread_helper, . - kernel_thread_helper");
+
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+
+	regs.r0 = (unsigned long)arg;
+	regs.r1 = (unsigned long)fn;
+	regs.r2 = (unsigned long)do_exit;
+	regs.lr = (unsigned long)kernel_thread_helper;
+	regs.pc = (unsigned long)kernel_thread_helper;
+	regs.sr = MODE_SUPERVISOR;
+
+	return do_fork(flags | CLONE_VM | CLONE_UNTRACED,
+		       0, &regs, 0, NULL, NULL);
+}
+EXPORT_SYMBOL(kernel_thread);
+
+/*
+ * Free current thread data structures etc
+ */
+void exit_thread(void)
+{
+	/* nothing to do */
+}
+
+void flush_thread(void)
+{
+	/* nothing to do */
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+	/* do nothing */
+}
+
+static const char *cpu_modes[] = {
+	"Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
+	"Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
+};
+
+void show_regs(struct pt_regs *regs)
+{
+	unsigned long sp = regs->sp;
+	unsigned long lr = regs->lr;
+	unsigned long mode = (regs->sr & MODE_MASK) >> MODE_SHIFT;
+
+	if (!user_mode(regs))
+		sp = (unsigned long)regs + FRAME_SIZE_FULL;
+
+	print_symbol("PC is at %s\n", instruction_pointer(regs));
+	print_symbol("LR is at %s\n", lr);
+	printk("pc : [<%08lx>]    lr : [<%08lx>]    %s\n"
+	       "sp : %08lx  r12: %08lx  r11: %08lx\n",
+	       instruction_pointer(regs),
+	       lr, print_tainted(), sp, regs->r12, regs->r11);
+	printk("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
+	       regs->r10, regs->r9, regs->r8);
+	printk("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
+	       regs->r7, regs->r6, regs->r5, regs->r4);
+	printk("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
+	       regs->r3, regs->r2, regs->r1, regs->r0);
+	printk("Flags: %c%c%c%c%c\n",
+	       regs->sr & SR_Q ? 'Q' : 'q',
+	       regs->sr & SR_V ? 'V' : 'v',
+	       regs->sr & SR_N ? 'N' : 'n',
+	       regs->sr & SR_Z ? 'Z' : 'z',
+	       regs->sr & SR_C ? 'C' : 'c');
+	printk("Mode bits: %c%c%c%c%c%c%c%c%c\n",
+	       regs->sr & SR_H ? 'H' : 'h',
+	       regs->sr & SR_R ? 'R' : 'r',
+	       regs->sr & SR_J ? 'J' : 'j',
+	       regs->sr & SR_EM ? 'E' : 'e',
+	       regs->sr & SR_I3M ? '3' : '.',
+	       regs->sr & SR_I2M ? '2' : '.',
+	       regs->sr & SR_I1M ? '1' : '.',
+	       regs->sr & SR_I0M ? '0' : '.',
+	       regs->sr & SR_GM ? 'G' : 'g');
+	printk("CPU Mode: %s\n", cpu_modes[mode]);
+
+	show_trace(NULL, (unsigned long *)sp, regs);
+}
+EXPORT_SYMBOL(show_regs);
+
+/* Fill in the fpu structure for a core dump. This is easy -- we don't have any */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+	/* Not valid */
+	return 0;
+}
+
+asmlinkage void ret_from_fork(void);
+
+int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+		unsigned long unused,
+		struct task_struct *p, struct pt_regs *regs)
+{
+	struct pt_regs *childregs;
+
+	childregs = ((struct pt_regs *)(THREAD_SIZE + (unsigned long)p->thread_info)) - 1;
+	*childregs = *regs;
+
+	if (user_mode(regs))
+		childregs->sp = usp;
+	else
+		childregs->sp = (unsigned long)p->thread_info + THREAD_SIZE;
+
+	childregs->r12 = 0; /* Set return value for child */
+
+	p->thread.cpu_context.sr = MODE_SUPERVISOR | SR_GM;
+	p->thread.cpu_context.ksp = (unsigned long)childregs;
+	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
+
+	return 0;
+}
+
+/* r12-r8 are dummy parameters to force the compiler to use the stack */
+asmlinkage int sys_fork(struct pt_regs *regs)
+{
+	return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
+}
+
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+			 unsigned long parent_tidptr,
+			 unsigned long child_tidptr, struct pt_regs *regs)
+{
+	if (!newsp)
+		newsp = regs->sp;
+	return do_fork(clone_flags, newsp, regs, 0,
+		       (int __user *)parent_tidptr,
+		       (int __user *)child_tidptr);
+}
+
+asmlinkage int sys_vfork(struct pt_regs *regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp, regs,
+		       0, NULL, NULL);
+}
+
+asmlinkage int sys_execve(char __user *ufilename, char __user *__user *uargv,
+			  char __user *__user *uenvp, struct pt_regs *regs)
+{
+	int error;
+	char *filename;
+
+	filename = getname(ufilename);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		goto out;
+
+	error = do_execve(filename, uargv, uenvp, regs);
+	if (error == 0)
+		current->ptrace &= ~PT_DTRACE;
+	putname(filename);
+
+out:
+	return error;
+}
+
+
+/*
+ * This function is supposed to answer the question "who called
+ * schedule()?"
+ */
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long pc;
+	unsigned long stack_page;
+
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	stack_page = (unsigned long)p->thread_info;
+	BUG_ON(!stack_page);
+
+	/*
+	 * The stored value of PC is either the address right after
+	 * the call to __switch_to() or ret_from_fork.
+	 */
+	pc = thread_saved_pc(p);
+	if (in_sched_functions(pc)) {
+#ifdef CONFIG_FRAME_POINTER
+		unsigned long fp = p->thread.cpu_context.r7;
+		BUG_ON(fp < stack_page || fp > (THREAD_SIZE + stack_page));
+		pc = *(unsigned long *)fp;
+#else
+		/*
+		 * We depend on the frame size of schedule here, which
+		 * is actually quite ugly. It might be possible to
+		 * determine the frame size automatically at build
+		 * time by doing this:
+		 *   - compile sched.c
+		 *   - disassemble the resulting sched.o
+		 *   - look for 'sub sp,??' shortly after '<schedule>:'
+		 */
+		unsigned long sp = p->thread.cpu_context.ksp + 16;
+		BUG_ON(sp < stack_page || sp > (THREAD_SIZE + stack_page));
+		pc = *(unsigned long *)sp;
+#endif
+	}
+
+	return pc;
+}

arch/avr32/kernel/ptrace.c

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/unistd.h>
+#include <linux/notifier.h>
+
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+#include <asm/ocd.h>
+#include <asm/mmu_context.h>
+#include <asm/kdebug.h>
+
+static struct pt_regs *get_user_regs(struct task_struct *tsk)
+{
+	return (struct pt_regs *)((unsigned long) tsk->thread_info +
+				  THREAD_SIZE - sizeof(struct pt_regs));
+}
+
+static void ptrace_single_step(struct task_struct *tsk)
+{
+	pr_debug("ptrace_single_step: pid=%u, SR=0x%08lx\n",
+		 tsk->pid, tsk->thread.cpu_context.sr);
+	if (!(tsk->thread.cpu_context.sr & SR_D)) {
+		/*
+		 * Set a breakpoint at the current pc to force the
+		 * process into debug mode.  The syscall/exception
+		 * exit code will set a breakpoint at the return
+		 * address when this flag is set.
+		 */
+		pr_debug("ptrace_single_step: Setting TIF_BREAKPOINT\n");
+		set_tsk_thread_flag(tsk, TIF_BREAKPOINT);
+	}
+
+	/* The monitor code will do the actual step for us */
+	set_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching
+ *
+ * Make sure any single step bits, etc. are not set
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
+}
+
+/*
+ * Handle hitting a breakpoint
+ */
+static void ptrace_break(struct task_struct *tsk, struct pt_regs *regs)
+{
+	siginfo_t info;
+
+	info.si_signo = SIGTRAP;
+	info.si_errno = 0;
+	info.si_code  = TRAP_BRKPT;
+	info.si_addr  = (void __user *)instruction_pointer(regs);
+
+	pr_debug("ptrace_break: Sending SIGTRAP to PID %u (pc = 0x%p)\n",
+		 tsk->pid, info.si_addr);
+	force_sig_info(SIGTRAP, &info, tsk);
+}
+
+/*
+ * Read the word at offset "offset" into the task's "struct user". We
+ * actually access the pt_regs struct stored on the kernel stack.
+ */
+static int ptrace_read_user(struct task_struct *tsk, unsigned long offset,
+			    unsigned long __user *data)
+{
+	unsigned long *regs;
+	unsigned long value;
+
+	pr_debug("ptrace_read_user(%p, %#lx, %p)\n",
+		 tsk, offset, data);
+
+	if (offset & 3 || offset >= sizeof(struct user)) {
+		printk("ptrace_read_user: invalid offset 0x%08lx\n", offset);
+		return -EIO;
+	}
+
+	regs = (unsigned long *)get_user_regs(tsk);
+
+	value = 0;
+	if (offset < sizeof(struct pt_regs))
+		value = regs[offset / sizeof(regs[0])];
+
+	return put_user(value, data);
+}
+
+/*
+ * Write the word "value" to offset "offset" into the task's "struct
+ * user". We actually access the pt_regs struct stored on the kernel
+ * stack.
+ */
+static int ptrace_write_user(struct task_struct *tsk, unsigned long offset,
+			     unsigned long value)
+{
+	unsigned long *regs;
+
+	if (offset & 3 || offset >= sizeof(struct user)) {
+		printk("ptrace_write_user: invalid offset 0x%08lx\n", offset);
+		return -EIO;
+	}
+
+	if (offset >= sizeof(struct pt_regs))
+		return 0;
+
+	regs = (unsigned long *)get_user_regs(tsk);
+	regs[offset / sizeof(regs[0])] = value;
+
+	return 0;
+}
+
+static int ptrace_getregs(struct task_struct *tsk, void __user *uregs)
+{
+	struct pt_regs *regs = get_user_regs(tsk);
+
+	return copy_to_user(uregs, regs, sizeof(*regs)) ? -EFAULT : 0;
+}
+
+static int ptrace_setregs(struct task_struct *tsk, const void __user *uregs)
+{
+	struct pt_regs newregs;
+	int ret;
+
+	ret = -EFAULT;
+	if (copy_from_user(&newregs, uregs, sizeof(newregs)) == 0) {
+		struct pt_regs *regs = get_user_regs(tsk);
+
+		ret = -EINVAL;
+		if (valid_user_regs(&newregs)) {
+			*regs = newregs;
+			ret = 0;
+		}
+	}
+
+	return ret;
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+	unsigned long tmp;
+	int ret;
+
+	pr_debug("arch_ptrace(%ld, %ld, %#lx, %#lx)\n",
+		 request, child->pid, addr, data);
+
+	pr_debug("ptrace: Enabling monitor mode...\n");
+	__mtdr(DBGREG_DC, __mfdr(DBGREG_DC) | DC_MM | DC_DBE);
+
+	switch (request) {
+	/* Read the word at location addr in the child process */
+	case PTRACE_PEEKTEXT:
+	case PTRACE_PEEKDATA:
+		ret = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+		if (ret == sizeof(tmp))
+			ret = put_user(tmp, (unsigned long __user *)data);
+		else
+			ret = -EIO;
+		break;
+
+	case PTRACE_PEEKUSR:
+		ret = ptrace_read_user(child, addr,
+				       (unsigned long __user *)data);
+		break;
+
+	/* Write the word in data at location addr */
+	case PTRACE_POKETEXT:
+	case PTRACE_POKEDATA:
+		ret = access_process_vm(child, addr, &data, sizeof(data), 1);
+		if (ret == sizeof(data))
+			ret = 0;
+		else
+			ret = -EIO;
+		break;
+
+	case PTRACE_POKEUSR:
+		ret = ptrace_write_user(child, addr, data);
+		break;
+
+	/* continue and stop at next (return from) syscall */
+	case PTRACE_SYSCALL:
+	/* restart after signal */
+	case PTRACE_CONT:
+		ret = -EIO;
+		if (!valid_signal(data))
+			break;
+		if (request == PTRACE_SYSCALL)
+			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		else
+			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		child->exit_code = data;
+		/* XXX: Are we sure no breakpoints are active here? */
+		wake_up_process(child);
+		ret = 0;
+		break;
+
+	/*
+	 * Make the child exit. Best I can do is send it a
+	 * SIGKILL. Perhaps it should be put in the status that it
+	 * wants to exit.
+	 */
+	case PTRACE_KILL:
+		ret = 0;
+		if (child->exit_state == EXIT_ZOMBIE)
+			break;
+		child->exit_code = SIGKILL;
+		wake_up_process(child);
+		break;
+
+	/*
+	 * execute single instruction.
+	 */
+	case PTRACE_SINGLESTEP:
+		ret = -EIO;
+		if (!valid_signal(data))
+			break;
+		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		ptrace_single_step(child);
+		child->exit_code = data;
+		wake_up_process(child);
+		ret = 0;
+		break;
+
+	/* Detach a process that was attached */
+	case PTRACE_DETACH:
+		ret = ptrace_detach(child, data);
+		break;
+
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs(child, (void __user *)data);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs(child, (const void __user *)data);
+		break;
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	pr_debug("sys_ptrace returning %d (DC = 0x%08lx)\n", ret, __mfdr(DBGREG_DC));
+	return ret;
+}
+
+asmlinkage void syscall_trace(void)
+{
+	pr_debug("syscall_trace called\n");
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+
+	pr_debug("syscall_trace: notifying parent\n");
+	/* The 0x80 provides a way for the tracing parent to
+	 * distinguish between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+				 ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it
+	 * will do for normal use.  strace only continues with a
+	 * signal if the stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		pr_debug("syscall_trace: sending signal %d to PID %u\n",
+			 current->exit_code, current->pid);
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+
+asmlinkage void do_debug_priv(struct pt_regs *regs)
+{
+	unsigned long dc, ds;
+	unsigned long die_val;
+
+	ds = __mfdr(DBGREG_DS);
+
+	pr_debug("do_debug_priv: pc = %08lx, ds = %08lx\n", regs->pc, ds);
+
+	if (ds & DS_SSS)
+		die_val = DIE_SSTEP;
+	else
+		die_val = DIE_BREAKPOINT;
+
+	if (notify_die(die_val, regs, 0, SIGTRAP) == NOTIFY_STOP)
+		return;
+
+	if (likely(ds & DS_SSS)) {
+		extern void itlb_miss(void);
+		extern void tlb_miss_common(void);
+		struct thread_info *ti;
+
+		dc = __mfdr(DBGREG_DC);
+		dc &= ~DC_SS;
+		__mtdr(DBGREG_DC, dc);
+
+		ti = current_thread_info();
+		ti->flags |= _TIF_BREAKPOINT;
+
+		/* The TLB miss handlers don't check thread flags */
+		if ((regs->pc >= (unsigned long)&itlb_miss)
+		    && (regs->pc <= (unsigned long)&tlb_miss_common)) {
+			__mtdr(DBGREG_BWA2A, sysreg_read(RAR_EX));
+			__mtdr(DBGREG_BWC2A, 0x40000001 | (get_asid() << 1));
+		}
+
+		/*
+		 * If we're running in supervisor mode, the breakpoint
+		 * will take us where we want directly, no need to
+		 * single step.
+		 */
+		if ((regs->sr & MODE_MASK) != MODE_SUPERVISOR)
+			ti->flags |= TIF_SINGLE_STEP;
+	} else {
+		panic("Unable to handle debug trap at pc = %08lx\n",
+		      regs->pc);
+	}
+}
+
+/*
+ * Handle breakpoints, single steps and other debuggy things. To keep
+ * things simple initially, we run with interrupts and exceptions
+ * disabled all the time.
+ */
+asmlinkage void do_debug(struct pt_regs *regs)
+{
+	unsigned long dc, ds;
+
+	ds = __mfdr(DBGREG_DS);
+	pr_debug("do_debug: pc = %08lx, ds = %08lx\n", regs->pc, ds);
+
+	if (test_thread_flag(TIF_BREAKPOINT)) {
+		pr_debug("TIF_BREAKPOINT set\n");
+		/* We're taking care of it */
+		clear_thread_flag(TIF_BREAKPOINT);
+		__mtdr(DBGREG_BWC2A, 0);
+	}
+
+	if (test_thread_flag(TIF_SINGLE_STEP)) {
+		pr_debug("TIF_SINGLE_STEP set, ds = 0x%08lx\n", ds);
+		if (ds & DS_SSS) {
+			dc = __mfdr(DBGREG_DC);
+			dc &= ~DC_SS;
+			__mtdr(DBGREG_DC, dc);
+
+			clear_thread_flag(TIF_SINGLE_STEP);
+			ptrace_break(current, regs);
+		}
+	} else {
+		/* regular breakpoint */
+		ptrace_break(current, regs);
+	}
+}

arch/avr32/kernel/semaphore.c

+/*
+ * AVR32 sempahore implementation.
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * Based on linux/arch/i386/kernel/semaphore.c
+ *  Copyright (C) 1999 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+#include <asm/semaphore.h>
+#include <asm/atomic.h>
+
+/*
+ * Semaphores are implemented using a two-way counter:
+ * The "count" variable is decremented for each process
+ * that tries to acquire the semaphore, while the "sleeping"
+ * variable is a count of such acquires.
+ *
+ * Notably, the inline "up()" and "down()" functions can
+ * efficiently test if they need to do any extra work (up
+ * needs to do something only if count was negative before
+ * the increment operation.
+ *
+ * "sleeping" and the contention routine ordering is protected
+ * by the spinlock in the semaphore's waitqueue head.
+ *
+ * Note that these functions are only called when there is
+ * contention on the lock, and as such all this is the
+ * "non-critical" part of the whole semaphore business. The
+ * critical part is the inline stuff in <asm/semaphore.h>
+ * where we want to avoid any extra jumps and calls.
+ */
+
+/*
+ * Logic:
+ *  - only on a boundary condition do we need to care. When we go
+ *    from a negative count to a non-negative, we wake people up.
+ *  - when we go from a non-negative count to a negative do we
+ *    (a) synchronize with the "sleeper" count and (b) make sure
+ *    that we're on the wakeup list before we synchronize so that
+ *    we cannot lose wakeup events.
+ */
+
+void __up(struct semaphore *sem)
+{
+	wake_up(&sem->wait);
+}
+EXPORT_SYMBOL(__up);
+
+void __sched __down(struct semaphore *sem)
+{
+	struct task_struct *tsk = current;
+        DECLARE_WAITQUEUE(wait, tsk);
+        unsigned long flags;
+
+        tsk->state = TASK_UNINTERRUPTIBLE;
+        spin_lock_irqsave(&sem->wait.lock, flags);
+        add_wait_queue_exclusive_locked(&sem->wait, &wait);
+
+        sem->sleepers++;
+        for (;;) {
+                int sleepers = sem->sleepers;
+
+                /*
+                 * Add "everybody else" into it. They aren't
+                 * playing, because we own the spinlock in
+                 * the wait_queue_head.
+                 */
+                if (atomic_add_return(sleepers - 1, &sem->count) >= 0) {
+                        sem->sleepers = 0;
+                        break;
+                }
+                sem->sleepers = 1;      /* us - see -1 above */
+                spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+                schedule();
+
+                spin_lock_irqsave(&sem->wait.lock, flags);
+                tsk->state = TASK_UNINTERRUPTIBLE;
+        }
+        remove_wait_queue_locked(&sem->wait, &wait);
+        wake_up_locked(&sem->wait);
+        spin_unlock_irqrestore(&sem->wait.lock, flags);
+        tsk->state = TASK_RUNNING;
+}
+EXPORT_SYMBOL(__down);
+
+int __sched __down_interruptible(struct semaphore *sem)
+{
+	int retval = 0;
+	struct task_struct *tsk = current;
+        DECLARE_WAITQUEUE(wait, tsk);
+        unsigned long flags;
+
+        tsk->state = TASK_INTERRUPTIBLE;
+        spin_lock_irqsave(&sem->wait.lock, flags);
+        add_wait_queue_exclusive_locked(&sem->wait, &wait);
+
+        sem->sleepers++;
+        for (;;) {
+                int sleepers = sem->sleepers;
+
+		/*
+		 * With signals pending, this turns into the trylock
+		 * failure case - we won't be sleeping, and we can't
+		 * get the lock as it has contention. Just correct the
+		 * count and exit.
+		 */
+		if (signal_pending(current)) {
+			retval = -EINTR;
+			sem->sleepers = 0;
+			atomic_add(sleepers, &sem->count);
+			break;
+		}
+
+                /*
+                 * Add "everybody else" into it. They aren't
+                 * playing, because we own the spinlock in
+                 * the wait_queue_head.
+                 */
+                if (atomic_add_return(sleepers - 1, &sem->count) >= 0) {
+                        sem->sleepers = 0;
+                        break;
+                }
+                sem->sleepers = 1;      /* us - see -1 above */
+                spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+                schedule();
+
+                spin_lock_irqsave(&sem->wait.lock, flags);
+                tsk->state = TASK_INTERRUPTIBLE;
+        }
+        remove_wait_queue_locked(&sem->wait, &wait);
+        wake_up_locked(&sem->wait);
+        spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+        tsk->state = TASK_RUNNING;
+	return retval;
+}
+EXPORT_SYMBOL(__down_interruptible);

arch/avr32/kernel/setup.c

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/console.h>
+#include <linux/ioport.h>
+#include <linux/bootmem.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+
+#include <asm/sections.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+#include <asm/sysreg.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/init.h>
+
+extern int root_mountflags;
+
+/*
+ * Bootloader-provided information about physical memory
+ */
+struct tag_mem_range *mem_phys;
+struct tag_mem_range *mem_reserved;
+struct tag_mem_range *mem_ramdisk;
+
+/*
+ * Initialize loops_per_jiffy as 5000000 (500MIPS).
+ * Better make it too large than too small...
+ */
+struct avr32_cpuinfo boot_cpu_data = {
+	.loops_per_jiffy = 5000000
+};
+EXPORT_SYMBOL(boot_cpu_data);
+
+static char command_line[COMMAND_LINE_SIZE];
+
+/*
+ * Should be more than enough, but if you have a _really_ complex
+ * setup, you might need to increase the size of this...
+ */
+static struct tag_mem_range __initdata mem_range_cache[32];
+static unsigned mem_range_next_free;
+
+/*
+ * Standard memory resources
+ */
+static struct resource mem_res[] = {
+	{
+		.name	= "Kernel code",
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.name	= "Kernel data",
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+#define kernel_code	mem_res[0]
+#define kernel_data	mem_res[1]
+
+/*
+ * Early framebuffer allocation. Works as follows:
+ *   - If fbmem_size is zero, nothing will be allocated or reserved.
+ *   - If fbmem_start is zero when setup_bootmem() is called,
+ *     fbmem_size bytes will be allocated from the bootmem allocator.
+ *   - If fbmem_start is nonzero, an area of size fbmem_size will be
+ *     reserved at the physical address fbmem_start if necessary. If
+ *     the area isn't in a memory region known to the kernel, it will
+ *     be left alone.
+ *
+ * Board-specific code may use these variables to set up platform data
+ * for the framebuffer driver if fbmem_size is nonzero.
+ */
+static unsigned long __initdata fbmem_start;
+static unsigned long __initdata fbmem_size;
+
+/*
+ * "fbmem=xxx[kKmM]" allocates the specified amount of boot memory for
+ * use as framebuffer.
+ *
+ * "fbmem=xxx[kKmM]@yyy[kKmM]" defines a memory region of size xxx and
+ * starting at yyy to be reserved for use as framebuffer.
+ *
+ * The kernel won't verify that the memory region starting at yyy
+ * actually contains usable RAM.
+ */
+static int __init early_parse_fbmem(char *p)
+{
+	fbmem_size = memparse(p, &p);
+	if (*p == '@')
+		fbmem_start = memparse(p, &p);
+	return 0;
+}
+early_param("fbmem", early_parse_fbmem);
+
+static inline void __init resource_init(void)
+{
+	struct tag_mem_range *region;
+
+	kernel_code.start = __pa(init_mm.start_code);
+	kernel_code.end = __pa(init_mm.end_code - 1);
+	kernel_data.start = __pa(init_mm.end_code);
+	kernel_data.end = __pa(init_mm.brk - 1);
+
+	for (region = mem_phys; region; region = region->next) {
+		struct resource *res;
+		unsigned long phys_start, phys_end;
+
+		if (region->size == 0)
+			continue;
+
+		phys_start = region->addr;
+		phys_end = phys_start + region->size - 1;
+
+		res = alloc_bootmem_low(sizeof(*res));
+		res->name = "System RAM";
+		res->start = phys_start;
+		res->end = phys_end;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+		request_resource (&iomem_resource, res);
+
+		if (kernel_code.start >= res->start &&
+		    kernel_code.end <= res->end)
+			request_resource (res, &kernel_code);
+		if (kernel_data.start >= res->start &&
+		    kernel_data.end <= res->end)
+			request_resource (res, &kernel_data);
+	}
+}
+
+static int __init parse_tag_core(struct tag *tag)
+{
+	if (tag->hdr.size > 2) {
+		if ((tag->u.core.flags & 1) == 0)
+			root_mountflags &= ~MS_RDONLY;
+		ROOT_DEV = new_decode_dev(tag->u.core.rootdev);
+	}
+	return 0;
+}
+__tagtable(ATAG_CORE, parse_tag_core);
+
+static int __init parse_tag_mem_range(struct tag *tag,
+				      struct tag_mem_range **root)
+{
+	struct tag_mem_range *cur, **pprev;
+	struct tag_mem_range *new;
+
+	/*
+	 * Ignore zero-sized entries. If we're running standalone, the
+	 * SDRAM code may emit such entries if something goes
+	 * wrong...
+	 */
+	if (tag->u.mem_range.size == 0)
+		return 0;
+
+	/*
+	 * Copy the data so the bootmem init code doesn't need to care
+	 * about it.
+	 */
+	if (mem_range_next_free >=
+	    (sizeof(mem_range_cache) / sizeof(mem_range_cache[0])))
+		panic("Physical memory map too complex!\n");
+
+	new = &mem_range_cache[mem_range_next_free++];
+	*new = tag->u.mem_range;
+
+	pprev = root;
+	cur = *root;
+	while (cur) {
+		pprev = &cur->next;
+		cur = cur->next;
+	}
+
+	*pprev = new;
+	new->next = NULL;
+
+	return 0;
+}
+
+static int __init parse_tag_mem(struct tag *tag)
+{
+	return parse_tag_mem_range(tag, &mem_phys);
+}
+__tagtable(ATAG_MEM, parse_tag_mem);
+
+static int __init parse_tag_cmdline(struct tag *tag)
+{
+	strlcpy(saved_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
+	return 0;
+}
+__tagtable(ATAG_CMDLINE, parse_tag_cmdline);
+
+static int __init parse_tag_rdimg(struct tag *tag)
+{
+	return parse_tag_mem_range(tag, &mem_ramdisk);
+}
+__tagtable(ATAG_RDIMG, parse_tag_rdimg);
+
+static int __init parse_tag_clock(struct tag *tag)
+{
+	/*
+	 * We'll figure out the clocks by peeking at the system
+	 * manager regs directly.
+	 */
+	return 0;
+}
+__tagtable(ATAG_CLOCK, parse_tag_clock);
+
+static int __init parse_tag_rsvd_mem(struct tag *tag)
+{
+	return parse_tag_mem_range(tag, &mem_reserved);
+}
+__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
+
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+#if 0
+	const struct platform_device *pdev;
+
+	/*
+	 * We really need a bus type that supports "classes"...this
+	 * will do for now (until we must handle other kinds of
+	 * ethernet controllers)
+	 */
+	pdev = platform_get_device("macb", tag->u.ethernet.mac_index);
+	if (pdev && pdev->dev.platform_data) {
+		struct eth_platform_data *data = pdev->dev.platform_data;
+
+		data->valid = 1;
+		data->mii_phy_addr = tag->u.ethernet.mii_phy_addr;
+		memcpy(data->hw_addr, tag->u.ethernet.hw_address,
+		       sizeof(data->hw_addr));
+	}
+#endif
+	return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+/*
+ * Scan the tag table for this tag, and call its parse function. The
+ * tag table is built by the linker from all the __tagtable
+ * declarations.
+ */
+static int __init parse_tag(struct tag *tag)
+{
+	extern struct tagtable __tagtable_begin, __tagtable_end;
+	struct tagtable *t;
+
+	for (t = &__tagtable_begin; t < &__tagtable_end; t++)
+		if (tag->hdr.tag == t->tag) {
+			t->parse(tag);
+			break;
+		}
+
+	return t < &__tagtable_end;
+}
+
+/*
+ * Parse all tags in the list we got from the boot loader
+ */
+static void __init parse_tags(struct tag *t)
+{
+	for (; t->hdr.tag != ATAG_NONE; t = tag_next(t))
+		if (!parse_tag(t))
+			printk(KERN_WARNING
+			       "Ignoring unrecognised tag 0x%08x\n",
+			       t->hdr.tag);
+}
+
+void __init setup_arch (char **cmdline_p)
+{
+	struct clk *cpu_clk;
+
+	parse_tags(bootloader_tags);
+
+	setup_processor();
+	setup_platform();
+
+	cpu_clk = clk_get(NULL, "cpu");
+	if (IS_ERR(cpu_clk)) {
+		printk(KERN_WARNING "Warning: Unable to get CPU clock\n");
+	} else {
+		unsigned long cpu_hz = clk_get_rate(cpu_clk);
+
+		/*
+		 * Well, duh, but it's probably a good idea to
+		 * increment the use count.
+		 */
+		clk_enable(cpu_clk);
+
+		boot_cpu_data.clk = cpu_clk;
+		boot_cpu_data.loops_per_jiffy = cpu_hz * 4;
+		printk("CPU: Running at %lu.%03lu MHz\n",
+		       ((cpu_hz + 500) / 1000) / 1000,
+		       ((cpu_hz + 500) / 1000) % 1000);
+	}
+
+	init_mm.start_code = (unsigned long) &_text;
+	init_mm.end_code = (unsigned long) &_etext;
+	init_mm.end_data = (unsigned long) &_edata;
+	init_mm.brk = (unsigned long) &_end;
+
+	strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+	parse_early_param();
+
+	setup_bootmem();
+
+	board_setup_fbmem(fbmem_start, fbmem_size);
+
+#ifdef CONFIG_VT
+	conswitchp = &dummy_con;
+#endif
+
+	paging_init();
+
+	resource_init();
+}

arch/avr32/kernel/signal.c

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * Based on linux/arch/sh/kernel/signal.c
+ *  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/suspend.h>
+
+#include <asm/uaccess.h>
+#include <asm/ucontext.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+			       struct pt_regs *regs)
+{
+	return do_sigaltstack(uss, uoss, regs->sp);
+}
+
+struct rt_sigframe
+{
+	struct siginfo info;
+	struct ucontext uc;
+	unsigned long retcode;
+};
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+
+#define COPY(x)		err |= __get_user(regs->x, &sc->x)
+	COPY(sr);
+	COPY(pc);
+	COPY(lr);
+	COPY(sp);
+	COPY(r12);
+	COPY(r11);
+	COPY(r10);
+	COPY(r9);
+	COPY(r8);
+	COPY(r7);
+	COPY(r6);
+	COPY(r5);
+	COPY(r4);
+	COPY(r3);
+	COPY(r2);
+	COPY(r1);
+	COPY(r0);
+#undef	COPY
+
+	/*
+	 * Don't allow anyone to pretend they're running in supervisor
+	 * mode or something...
+	 */
+	err |= !valid_user_regs(regs);
+
+	return err;
+}
+
+
+asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	sigset_t set;
+
+	frame = (struct rt_sigframe __user *)regs->sp;
+	pr_debug("SIG return: frame = %p\n", frame);
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+		goto badframe;
+
+	pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n",
+		 regs->pc, regs->lr, regs->sp);
+
+	return regs->r12;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
+{
+	int err = 0;
+
+#define COPY(x)		err |= __put_user(regs->x, &sc->x)
+	COPY(sr);
+	COPY(pc);
+	COPY(lr);
+	COPY(sp);
+	COPY(r12);
+	COPY(r11);
+	COPY(r10);
+	COPY(r9);
+	COPY(r8);
+	COPY(r7);
+	COPY(r6);
+	COPY(r5);
+	COPY(r4);
+	COPY(r3);
+	COPY(r2);
+	COPY(r1);
+	COPY(r0);
+#undef	COPY
+
+	return err;
+}
+
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, int framesize)
+{
+	unsigned long sp = regs->sp;
+
+	if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
+		sp = current->sas_ss_sp + current->sas_ss_size;
+
+	return (void __user *)((sp - framesize) & ~3);
+}
+
+static int
+setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+	       sigset_t *set, struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	int err = 0;
+
+	frame = get_sigframe(ka, regs, sizeof(*frame));
+	err = -EFAULT;
+	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
+		goto out;
+
+	/*
+	 * Set up the return code:
+	 *
+	 *	mov	r8, __NR_rt_sigreturn
+	 *	scall
+	 *
+	 * Note: This will blow up since we're using a non-executable
+	 * stack. Better use SA_RESTORER.
+	 */
+#if __NR_rt_sigreturn > 127
+# error __NR_rt_sigreturn must be < 127 to fit in a short mov
+#endif
+	err = __put_user(0x3008d733 | (__NR_rt_sigreturn << 20),
+			 &frame->retcode);
+
+	err |= copy_siginfo_to_user(&frame->info, info);
+
+	/* Set up the ucontext */
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(NULL, &frame->uc.uc_link);
+	err |= __put_user((void __user *)current->sas_ss_sp,
+			  &frame->uc.uc_stack.ss_sp);
+	err |= __put_user(sas_ss_flags(regs->sp),
+			  &frame->uc.uc_stack.ss_flags);
+	err |= __put_user(current->sas_ss_size,
+			  &frame->uc.uc_stack.ss_size);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	if (err)
+		goto out;
+
+	regs->r12 = sig;
+	regs->r11 = (unsigned long) &frame->info;
+	regs->r10 = (unsigned long) &frame->uc;
+	regs->sp = (unsigned long) frame;
+	if (ka->sa.sa_flags & SA_RESTORER)
+		regs->lr = (unsigned long)ka->sa.sa_restorer;
+	else {
+		printk(KERN_NOTICE "[%s:%d] did not set SA_RESTORER\n",
+		       current->comm, current->pid);
+		regs->lr = (unsigned long) &frame->retcode;
+	}
+
+	pr_debug("SIG deliver [%s:%d]: sig=%d sp=0x%lx pc=0x%lx->0x%p lr=0x%lx\n",
+		 current->comm, current->pid, sig, regs->sp,
+		 regs->pc, ka->sa.sa_handler, regs->lr);
+
+	regs->pc = (unsigned long) ka->sa.sa_handler;
+
+out:
+	return err;
+}
+
+static inline void restart_syscall(struct pt_regs *regs)
+{
+	if (regs->r12 == -ERESTART_RESTARTBLOCK)
+		regs->r8 = __NR_restart_syscall;
+	else
+		regs->r12 = regs->r12_orig;
+	regs->pc -= 2;
+}
+
+static inline void
+handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
+	      sigset_t *oldset, struct pt_regs *regs, int syscall)
+{
+	int ret;
+
+	/*
+	 * Set up the stack frame
+	 */
+	ret = setup_rt_frame(sig, ka, info, oldset, regs);
+
+	/*
+	 * Check that the resulting registers are sane
+	 */
+	ret |= !valid_user_regs(regs);
+
+	/*
+	 * Block the signal if we were unsuccessful.
+	 */
+	if (ret != 0 || !(ka->sa.sa_flags & SA_NODEFER)) {
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked, &current->blocked,
+			  &ka->sa.sa_mask);
+		sigaddset(&current->blocked, sig);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
+
+	if (ret == 0)
+		return;
+
+	force_sigsegv(sig, current);
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it
+ * doesn't want to handle. Thus you cannot kill init even with a
+ * SIGKILL even by mistake.
+ */
+int do_signal(struct pt_regs *regs, sigset_t *oldset, int syscall)
+{
+	siginfo_t info;
+	int signr;
+	struct k_sigaction ka;
+
+	/*
+	 * We want the common case to go fast, which is why we may in
+	 * certain cases get here from kernel mode. Just return
+	 * without doing anything if so.
+	 */
+	if (!user_mode(regs))
+		return 0;
+
+	if (try_to_freeze()) {
+		signr = 0;
+		if (!signal_pending(current))
+			goto no_signal;
+	}
+
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else if (!oldset)
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+no_signal:
+	if (syscall) {
+		switch (regs->r12) {
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+			if (signr > 0) {
+				regs->r12 = -EINTR;
+				break;
+			}
+			/* fall through */
+		case -ERESTARTSYS:
+			if (signr > 0 && !(ka.sa.sa_flags & SA_RESTART)) {
+				regs->r12 = -EINTR;
+				break;
+			}
+			/* fall through */
+		case -ERESTARTNOINTR:
+			restart_syscall(regs);
+		}
+	}
+
+	if (signr == 0) {
+		/* No signal to deliver -- put the saved sigmask back */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+		}
+		return 0;
+	}
+
+	handle_signal(signr, &ka, &info, oldset, regs, syscall);
+	return 1;
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs, struct thread_info *ti)
+{
+	int syscall = 0;
+
+	if ((sysreg_read(SR) & MODE_MASK) == MODE_SUPERVISOR)
+		syscall = 1;
+
+	if (ti->flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+		do_signal(regs, &current->blocked, syscall);
+}

arch/avr32/kernel/switch_to.S

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/sysreg.h>
+
+	.text
+	.global	__switch_to
+	.type	__switch_to, @function
+
+	/* Switch thread context from "prev" to "next", returning "last"
+	 *   r12 :	prev
+	 *   r11 :	&prev->thread + 1
+	 *   r10 :	&next->thread
+	 */
+__switch_to:
+	stm	--r11, r0,r1,r2,r3,r4,r5,r6,r7,sp,lr
+	mfsr	r9, SYSREG_SR
+	st.w	--r11, r9
+	ld.w	r8, r10++
+	/*
+	 * schedule() may have been called from a mode with a different
+	 * set of registers. Make sure we don't lose anything here.
+	 */
+	pushm	r10,r12
+	mtsr	SYSREG_SR, r8
+	frs			/* flush the return stack */
+	sub	pc, -2		/* flush the pipeline */
+	popm	r10,r12
+	ldm	r10++, r0,r1,r2,r3,r4,r5,r6,r7,sp,pc
+	.size	__switch_to, . - __switch_to

arch/avr32/kernel/sys_avr32.c

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/mm.h>
+#include <linux/unistd.h>
+
+#include <asm/mman.h>
+#include <asm/uaccess.h>
+
+asmlinkage int sys_pipe(unsigned long __user *filedes)
+{
+	int fd[2];
+	int error;
+
+	error = do_pipe(fd);
+	if (!error) {
+		if (copy_to_user(filedes, fd, sizeof(fd)))
+			error = -EFAULT;
+	}
+	return error;
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			  unsigned long prot, unsigned long flags,
+			  unsigned long fd, off_t offset)
+{
+	int error = -EBADF;
+	struct file *file = NULL;
+
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		file = fget(fd);
+		if (!file)
+			return error;
+	}
+
+	down_write(&current->mm->mmap_sem);
+	error = do_mmap_pgoff(file, addr, len, prot, flags, offset);
+	up_write(&current->mm->mmap_sem);
+
+	if (file)
+		fput(file);
+	return error;
+}

arch/avr32/kernel/syscall-stubs.S

+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Stubs for syscalls that require access to pt_regs or that take more
+ * than five parameters.
+ */
+
+#define ARG6	r3
+
+	.text
+	.global __sys_rt_sigsuspend
+	.type	__sys_rt_sigsuspend,@function
+__sys_rt_sigsuspend:
+	mov	r10, sp
+	rjmp	sys_rt_sigsuspend
+
+	.global	__sys_sigaltstack
+	.type	__sys_sigaltstack,@function
+__sys_sigaltstack:
+	mov	r10, sp
+	rjmp	sys_sigaltstack
+
+	.global	__sys_rt_sigreturn
+	.type	__sys_rt_sigreturn,@function
+__sys_rt_sigreturn:
+	mov	r12, sp
+	rjmp	sys_rt_sigreturn
+
+	.global	__sys_fork
+	.type	__sys_fork,@function
+__sys_fork:
+	mov	r12, sp
+	rjmp	sys_fork
+
+	.global	__sys_clone
+	.type	__sys_clone,@function
+__sys_clone:
+	mov	r8, sp
+	rjmp	sys_clone
+
+	.global	__sys_vfork
+	.type	__sys_vfork,@function
+__sys_vfork:
+	mov	r12, sp
+	rjmp	sys_vfork
+
+	.global	__sys_execve
+	.type	__sys_execve,@function
+__sys_execve:
+	mov	r9, sp
+	rjmp	sys_execve
+
+	.global	__sys_mmap2
+	.type	__sys_mmap2,@function
+__sys_mmap2:
+	pushm	lr
+	st.w	--sp, ARG6
+	rcall	sys_mmap2
+	sub	sp, -4
+	popm	pc
+
+	.global	__sys_sendto
+	.type	__sys_sendto,@function
+__sys_sendto:
+	pushm	lr
+	st.w	--sp, ARG6
+	rcall	sys_sendto
+	sub	sp, -4
+	popm	pc
+
+	.global	__sys_recvfrom
+	.type	__sys_recvfrom,@function
+__sys_recvfrom:
+	pushm	lr
+	st.w	--sp, ARG6
+	rcall	sys_recvfrom
+	sub	sp, -4
+	popm	pc
+
+	.global	__sys_pselect6
+	.type	__sys_pselect6,@function
+__sys_pselect6:
+	pushm	lr
+	st.w	--sp, ARG6
+	rcall	sys_pselect6
+	sub	sp, -4
+	popm	pc
+
+	.global	__sys_splice
+	.type	__sys_splice,@function
+__sys_splice:
+	pushm	lr
+	st.w	--sp, ARG6
+	rcall	sys_splice
+	sub	sp, -4
+	popm	pc

arch/avr32/kernel/vmlinux.lds.c

+/*
+ * AVR32 linker script for the Linux kernel
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define LOAD_OFFSET 0x00000000
+#include <asm-generic/vmlinux.lds.h>
+
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
+
+/* Big endian */
+jiffies = jiffies_64 + 4;
+
+SECTIONS
+{
+	. = CONFIG_ENTRY_ADDRESS;
+	.init		: AT(ADDR(.init) - LOAD_OFFSET) {
+		_stext = .;
+		__init_begin = .;
+			_sinittext = .;
+			*(.text.reset)
+			*(.init.text)
+			_einittext = .;
+		. = ALIGN(4);
+		__tagtable_begin = .;
+			*(.taglist)
+		__tagtable_end = .;
+			*(.init.data)
+		. = ALIGN(16);
+		__setup_start = .;
+			*(.init.setup)
+		__setup_end = .;
+		. = ALIGN(4);
+		__initcall_start = .;
+			*(.initcall1.init)
+			*(.initcall2.init)
+			*(.initcall3.init)
+			*(.initcall4.init)
+			*(.initcall5.init)
+			*(.initcall6.init)
+			*(.initcall7.init)
+		__initcall_end = .;
+		__con_initcall_start = .;
+			*(.con_initcall.init)
+		__con_initcall_end = .;
+		__security_initcall_start = .;
+			*(.security_initcall.init)
+		__security_initcall_end = .;
+		. = ALIGN(32);
+		__initramfs_start = .;
+			*(.init.ramfs)
+		__initramfs_end = .;
+		. = ALIGN(4096);
+		__init_end = .;
+	}
+
+	. = ALIGN(8192);
+	.text		: AT(ADDR(.text) - LOAD_OFFSET) {
+		_evba = .;
+		_text = .;
+		*(.ex.text)
+		. = 0x50;
+		*(.tlbx.ex.text)
+		. = 0x60;
+		*(.tlbr.ex.text)
+		. = 0x70;
+		*(.tlbw.ex.text)
+		. = 0x100;
+		*(.scall.text)
+		*(.irq.text)
+		*(.text)
+		SCHED_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		*(.fixup)
+		*(.gnu.warning)
+		_etext = .;
+	} = 0xd703d703
+
+	. = ALIGN(4);
+	__ex_table	: AT(ADDR(__ex_table) - LOAD_OFFSET) {
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+	}
+
+	RODATA
+
+	. = ALIGN(8192);
+
+	.data		: AT(ADDR(.data) - LOAD_OFFSET) {
+		_data = .;
+		_sdata = .;
+		/*
+		 * First, the init task union, aligned to an 8K boundary.
+		 */
+		*(.data.init_task)
+
+		/* Then, the cacheline aligned data */
+		. = ALIGN(32);
+		*(.data.cacheline_aligned)
+
+		/* And the rest... */
+		*(.data.rel*)
+		*(.data)
+		CONSTRUCTORS
+
+		_edata = .;
+	}
+
+
+	. = ALIGN(8);
+	.bss    	: AT(ADDR(.bss) - LOAD_OFFSET) {
+		__bss_start = .;
+		*(.bss)
+		*(COMMON)
+		. = ALIGN(8);
+		__bss_stop = .;
+		_end = .;
+	}
+
+	/* When something in the kernel is NOT compiled as a module, the module
+	 * cleanup code and data are put into these segments. Both can then be
+	 * thrown away, as cleanup code is never called unless it's a module.
+	 */
+	/DISCARD/       	: {
+		*(.exit.text)
+		*(.exit.data)
+		*(.exitcall.exit)
+	}
+
+	DWARF_DEBUG
+}

arch/avr32/lib/Makefile

+#
+# Makefile for AVR32-specific library files
+#
+
+lib-y	:= copy_user.o clear_user.o
+lib-y	+= strncpy_from_user.o strnlen_user.o
+lib-y	+= delay.o memset.o memcpy.o findbit.o
+lib-y	+= csum_partial.o csum_partial_copy_generic.o
+lib-y	+= io-readsw.o io-readsl.o io-writesw.o io-writesl.o
+lib-y	+= __avr32_lsl64.o __avr32_lsr64.o __avr32_asr64.o

arch/avr32/lib/io-readsl.S

+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+	.global	__raw_readsl
+	.type	__raw_readsl,@function
+__raw_readsl:
+	cp.w	r10, 0
+	reteq	r12
+
+	/*
+	 * If r11 isn't properly aligned, we might get an exception on
+	 * some implementations. But there's not much we can do about it.
+	 */
+1:	ld.w	r8, r12[0]
+	sub	r10, 1
+	st.w	r11++, r8
+	brne	1b
+
+	retal	r12

arch/avr32/mach-at32ap/Makefile

+obj-y				+= at32ap.o clock.o pio.o intc.o extint.o
+obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o