提交 5f35fbe8 编写于 作者: V vikram pandita 提交者: Tony Lindgren

omap3: zoom: Introduce zoom3 board support

Zoom3 is the next version of Zoom2 board.
There has been a silicon update from zoom2 to zoom3.
        Zoom2 has OMAP34xx
        Zoom3 has OMAP3630 [1]
Zoom3 = OMAP3630 SOM board [2] + same zoom2 main board [3] + same debugboard

Zoom3 has a SDRAM part from Hynix
Zoom2 had SDRAM part from micron

Hynix memory timings are contributed by:
Chalhoub, Nicole and Bour, Vincent

Reuse the zoom2 files as much for zoom3, as at board level,
there is no change at all.

References: (courtesy Nishant Menon)
[1] OMAP3630
http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12836&contentId=52606

[2] SOM boards
http://logicpd.com/products/system-modules/texas-instruments-omap35x-som-lv

[3] Zoom2 boards
http://logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp
OMAP3630:
Signed-off-by: NVikram Pandita <vikram.pandita@ti.com>
Cc: Nicole Chalhoub <n-chalhoub@ti.com>
Cc: Vincent Bour <v-bour@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 6b61a83b
......@@ -97,6 +97,10 @@ config MACH_OMAP_ZOOM2
bool "OMAP3 Zoom2 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
config MACH_OMAP_4430SDP
bool "OMAP 4430 SDP board"
depends on ARCH_OMAP4
......@@ -78,6 +78,10 @@ obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
board-zoom-peripherals.o \
mmc-twl4030.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \
board-zoom-peripherals.o \
mmc-twl4030.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
......
/*
* Copyright (C) 2009 Texas Instruments Inc.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/board-zoom.h>
#include <plat/common.h>
#include <plat/board.h>
#include "sdram-hynix-h8mbx00u0mer-0em.h"
static void __init omap_zoom_map_io(void)
{
omap2_set_globals_343x();
omap2_map_common_io();
}
static struct omap_board_config_kernel zoom_config[] __initdata = {
};
static void __init omap_zoom_init_irq(void)
{
omap_board_config = zoom_config;
omap_board_config_size = ARRAY_SIZE(zoom_config);
omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static void __init omap_zoom_init(void)
{
zoom_peripherals_init();
zoom_debugboard_init();
}
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_zoom_map_io,
.init_irq = omap_zoom_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap_timer,
MACHINE_END
/*
* SDRC register values for the Hynix H8MBX00U0MER-0EM
*
* Copyright (C) 2009 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
#include <plat/sdrc.h>
/* Hynix H8MBX00U0MER-0EM */
static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
[0] = {
.rate = 200000000,
.actim_ctrla = 0xa2e1b4c6,
.actim_ctrlb = 0x0002131c,
.rfr_ctrl = 0x0005e601,
.mr = 0x00000032,
},
[1] = {
.rate = 166000000,
.actim_ctrla = 0x629db4c6,
.actim_ctrlb = 0x00012214,
.rfr_ctrl = 0x0004dc01,
.mr = 0x00000032,
},
[2] = {
.rate = 100000000,
.actim_ctrla = 0x51912284,
.actim_ctrlb = 0x0002120e,
.rfr_ctrl = 0x0002d101,
.mr = 0x00000022,
},
[3] = {
.rate = 83000000,
.actim_ctrla = 0x31512283,
.actim_ctrlb = 0x0001220a,
.rfr_ctrl = 0x00025501,
.mr = 0x00000022,
},
[4] = {
.rate = 0
},
};
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册